2.5 Stainless Steel Mandrel Tail Pipes

**NATEHAWK** · 05-07-2009, 08:02 AM

I thought a company in GA Exotic Ehaust was selling these as a kit for us? Im looking to get a set....

**ctrlraven** · 05-07-2009, 08:12 AM

www.mandrelbendingsolutions.com

Mandrel Bending Solutions
2539 Mountain Road Pasadena, MD 21122
(410)-360-7105
Call and ask to speak to Greg, tell him you know Chris with the Silver Marauder. They don't sell kits but Greg does wonders with mandrel bent exhaust.

**NATEHAWK** · 05-07-2009, 08:13 AM

Thanks Birdman

**merc** · 05-07-2009, 08:17 AM

http://www.mandrelbendingsolutions.c.../rolled/Detail

**Joe Walsh** · 05-07-2009, 09:36 AM

If you are looking for 2-1/2" over the axle exhaust pipes, I thought that Bryan/'muffrauder' made them at the new shop where he works.
Todd/TAF did offer them back in the day...

Here is the old thread with the information:

http://www.mercurymarauder.net/forum...ad.php?t=44285

**ctrlraven** · 05-07-2009, 09:36 AM

Merc he is looking for the tail pipes (over axle piping).

**RR|Suki** · 05-07-2009, 09:43 AM

just find a good local exhaust shop, it really isn't rocket science, other than headers, my whole exhaust was done at a local shop for next to nothing

**merc** · 05-07-2009, 09:54 AM

Originally Posted by ctrlraven

Merc he is looking for the tail pipes (over axle piping).

Oh ok, but I like the price and looks of the exhaust tips they offer. Are you near there shop?

**NATEHAWK** · 05-07-2009, 10:05 AM

Yea I got a shop that can do the work but they don't do mandrel bending. Is it really that much difference?

**Joe Walsh** · 05-07-2009, 10:09 AM

Mandrel bending is better because a consistent diameter is maintained through the entire curve of piping.
There are no crimps or wrinkles in the pipe like you see on OEM systems.

**O's Fan Rich** · 05-07-2009, 10:10 AM

Originally Posted by NATEHAWK

Yea I got a shop that can do the work but they don't do mandrel bending. Is it really that much difference?

^^^^^What Joe Said^^^^^

**RR|Suki** · 05-07-2009, 10:21 AM

after the mufflers.... I'd have to see some numbers to really care what happens after the mufflers especially on a blown car

**ctrlraven** · 05-07-2009, 11:51 AM

Originally Posted by NATEHAWK

Yea I got a shop that can do the work but they don't do mandrel bending. Is it really that much difference?

Give Greg a call he can better explain and possible give a quote for the work. I will be getting him to do my full exhaust and he is also the contact I was dealing with to get the possible cat-back exhaust kit made up for our cars but need the money to get mine done so they can take measurements and all.

**NATEHAWK** · 05-07-2009, 01:09 PM

Originally Posted by ctrlraven

Give Greg a call he can better explain explains and possible quote for the work. I will be getting him to do my full exhaust and he is also the contact I was dealing with to get the possible cat-back exhaust kit made up for our cars but need the money to get mine done so they can take measurements and all.

I called Greg today he wasnt in. I will give him a call tomorrow.

**VictorCrown** · 05-10-2009, 07:59 PM

Looking for a place to make a custom H-Pipe and this looks like IT. Thanks for the link, I'll be calling them. It is to go behind Stainless Works Headers and a pair of Magnaflow Catalytic Converters.

Thx!

Vic

Thread: 2.5 Stainless Steel Mandrel Tail Pipes

Thread Tools

Display

2.5 Stainless Steel Mandrel Tail Pipes

Thread Information

Users Browsing this Thread

Similar Threads

TCE stainless steel brake lines

Used Flowmaster 40 Series Delta Flow in Stainless Steel

Installed Stainless works Longtubes... Pipes wont fit.

how do you care for your tips?

Painting stainless steel

Posting Permissions