i understand about $ recouping. I can't do everything i want at once either.
i understand about $ recouping. I can't do everything i want at once either.
2004 SB Ported Trilogy 48
Has supporting mods and stuff
Thanks to Marty O for his help in updating this car.
R.I.P.
Rex "SC Cheesehead"
SOLD 12/31/2021
Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.
2004 SB Ported Trilogy 48
Has supporting mods and stuff
Thanks to Marty O for his help in updating this car.
R.I.P.
Rex "SC Cheesehead"
http://www.mototuneusa.com/break_in_secrets.htm
What's The Best Way To Break-In A New Engine ??
The Short Answer: Run it Hard !
I've had multiple sportbikes, and I beat the crap out of them as soon as they came off the floor. Never had an issue. They actually ran better. Two different trucks I had done in the past. I ran them hard from the start. Never had an issue. Everyone believes what they want. I side with Zack.
There is no off position on my genius switch.
I professionally raced motocross for several years, built my own engines... of all of the engines I built, the one that had to be done in one week and "broken in" at the track during practice is the one that ran the best... it got one warm up in the pits, one real easy lap of rolling all of the jumps and light acceleration down the straights... THEN LET R EAT...
#2941 300A
4.10's, carbon clutches
Marty O Tune
Curless Cure
Widened Wheels
Dead Pedal
Eaton Swapped
Bar tender and maker of:
Christmas in a cup
The "Bucket of South Haven Iced Tea"
One Legged Lesbian Kickboxer
Cocka Two
They built my new motor and started it......checked for leaks and wound it up on the dyno which seems to me to be running it hard??
All NASCAR motors are run WOT almost immediately!!
What needs "breaking in" if I may ask??
No Marauder
There are currently 1 users browsing this thread. (0 members and 1 guests)