Zack request

[Lowndex]

Zach,

I would love my rear spoiler to look like lji372's. Will you build one for me, sir?
I hope you say yes and specify the $.

http://imagizer.imageshack.us/v2/800x600q90/910/kwEzoF.jpg (https://imageshack.com/i/pakwEzoFj)

Anyone else interested?

[Ourobos]

That is slick

[1Marauder]

THAT IS SLICK!

Yes I am interested!

[RubberCtyRauder]

Good luck with that!..lol and that is Zack's car not lj

[O's Fan Rich]

It does look good, and others have asked. Throw a BIG number at him, you never know.

My son Zack hates when someone spells it Zach...." ZACKary not Zatchary", he says.
Wonder if Zack likes Zach.... never asked.

[RubberCtyRauder]

it's only money, Obama will print more, oh wait, didn't he do that already?

[Zack]

It's Zack and not a chance in hell

[ChiTownMaraud3r]

Bahahaha better get that multiple check books ready.. even then, don't get your hopes up.

[03blackvegas]

It's Zack and not a chance in hell

At least give us the "Blue Prints", so we can attempt.

[Bad_S55]

Get creative & do something unique to you instead of copying what someone else already did.

[O's Fan Rich]

It's Zack and not a chance in hell

IIRC... that was your previous answer to the same inquiry.

[Bad_S55]

IIRC... that was your previous answer to the same inquiry.

He's only made two I believe. Drilling 77 individual holes in one spoiler, I wouldn't want to do that again either.

[Lowndex]

Good luck with that!..lol and that is Zack's car not lj

Whoops. My bad. :o

[Lowndex]

It's Zack and not a chance in hell

Guessing 8 hrs of labor @ $50.00 / hr = $450

Would, could you do it for $500?

[RF Overlord]

Drilling 77 individual holes in one spoiler, ...and installing 77 individual LEDs...
...and WIRING 77 individual LEDs...

I don't blame him for not wanting to.

Ask him to build another crystal badgeless grille... :run:

[RubberCtyRauder]

Guessing 8 hrs of labor @ $50.00 / hr = $450

Would, could you do it for $500?

don't forget cost of spoiler, paint.

[Bad_S55]

Guessing 8 hrs of labor @ $50.00 / hr = $450

Would, could you do it for $500?


I did another one on Fruit Punch
I charged $600 to do it. Still wasn't enough

I doubt he would do it for a brick of solid gold.

[lji372]

I ****g love the look.

Zack has said no more than once on doing these.

Certainly there is a reason and I doubt it has anything to do with money.

I was just throwing unobtainium out there for you.....

Drives people nuts........

[Mebot]

Get creative & do something unique to you instead of copying what someone else already did.
This

I have no doubt it's a pain in the ass to modify, but if you're going to put that much time and effort into a project like this why not make it something unique to you

Can't stop the signal...

[lji372]

This

I have no doubt it's a pain in the ass to modify, but if you're going to put that much time and effort into a project like this why not make it something unique to you

Can't stop the signal...

Because it looks awesome and it's wonderful.

I want one (or 4) too!!

[Lowndex]

don't forget cost of spoiler, paint.

I provide the spoiler and have painted.

[Lowndex]

Because it looks awesome and it's wonderful.

I want one (or 4) too!!

Bingo! Well said, sir.

[Lowndex]

How $ to say, "yes", Zach?

[O's Fan Rich]

How $ to say, "yes", Zach?

Zach!!!! Lol.

I remember how happy Dennis was with the FruitPunch spoiler... followed him a number of miles and it looked awesome!
Now, Ed has it. I'd Imagine he's livin' the dream!

[Turbov6Bryan]

Somebody needs to go into the spoiler drilling business

Love the look of the 77 holes, crazy nice

[rauder88]

LOL @ $500 I'm guessing that doesn't even make him want to touch the spoiler for that. Add a 0 to the end, he may consider it then.
and it's Zack

[chief455]

It's Zack and not a chance in hell

What I expected to see, exactly.
F that job

[chief455]

Guessing 8 hrs of labor @ $50.00 / hr = $450

Would, could you do it for $500?

Is that what KC is charging?

[Lowndex]

Is that what KC is charging?

Are you trying to start some ****? Help the thread or zip it.

[ctrlraven]

Are you trying to start some ****? Help the thread or zip it.
Enhance your calm cause that was funny.

It's Zack and not a chance in hell
There is your answer, many have asked before you and the answer is the same, No.

[Siege]

I wonder if it could be made less labor intensive by carving out a solid area instead of individual holes and using a flexible LED strip.

* A router bit with a custom guide to roll along the top surface of the spoiler should work well.





* Not knowing anything about the internal construction of the stock spoiler.

[O's Fan Rich]

I wonder if it could be made less labor intensive by carving out a solid area instead of individual holes and using a flexible LED strip.

* A router bit with a custom guide to roll along the top surface of the spoiler should work well.


* Not knowing anything about the internal construction of the stock spoiler.


if you could get that working... there seems to be about $500.00 waiting for you.
Oh, if you need to ask ZacK a question, spelling it right would be good... especially after he made the correction himself.

[Zack]

I made an additional spoiler back in 04 or 05 at the cost of $650 and that wasn't nearly enough.

My biggest hurdle is moisture getting into the spoiler, because 4 huge access holes needed to be cut out of the back. I have had to repair mine once and I don't even drive the car. It happened from washing it.

With the advancement and options of modern day LED lighting, I'm sure an easier method is now at our fingertips.

[justbob]

At least give us the "Blue Prints", so we can attempt.


In picture format. [emoji6]
http://images.tapatalk-cdn.com/15/12/24/b351b4e5f252b55f76edcf3948c20d b7.jpg
http://images.tapatalk-cdn.com/15/12/24/b6a96942cbc28e1432b6aaeb99d343 e3.jpg
http://images.tapatalk-cdn.com/15/12/24/29518233c8a34c460912eadc38c94a 15.jpg
http://images.tapatalk-cdn.com/15/12/24/afb289f4d00e98ec44f68f122968fb 24.jpg
http://images.tapatalk-cdn.com/15/12/24/14b0b4fb33b24f48af7c234652a519 1c.jpg


Sent from my iThrone using Tapatalk

[Lowndex]

I made an additional spoiler back in 04 or 05 at the cost of $650 and that wasn't nearly enough.

My biggest hurdle is moisture getting into the spoiler, because 4 huge access holes needed to be cut out of the back. I have had to repair mine once and I don't even drive the car. It happened from washing it.

With the advancement and options of modern day LED lighting, I'm sure an easier method is now at our fingertips.

Understood and thank you for the response.

[Bad_S55]

I wonder if it could be made less labor intensive by carving out a solid area instead of individual holes and using a flexible LED strip.

* A router bit with a custom guide to roll along the top surface of the spoiler should work well.





* Not knowing anything about the internal construction of the stock spoiler.

Sharp thinking. I've never help a Marauder spoiler before, so I can't offer any insight. My Roush spoiler is hard, dense foam/honeycomb covered in fiberglass.

If it wasn't for the outrageous drilling/cutting, I'd take up a project like that. I'm pretty good with wiring & electrical.

[Zack]

^^^What Bob said.
I was just about to post the same thing

[Zack]

The problem with the LED strips is you will run out of real estate as you get toward the ends of the spoiler. It is very cramped in there.

I'm kind of interested in making one now

[justbob]

I imagine this is all you had to work with ten years ago?
http://images.tapatalk-cdn.com/15/12/24/eb4bc1cce5bb2601fb2613945ddfa8 d8.jpg


Sent from my iThrone using Tapatalk

[Zack]

I imagine this is all you had to work with ten years ago?
http://images.tapatalk-cdn.com/15/12/24/eb4bc1cce5bb2601fb2613945ddfa8 d8.jpg


Sent from my iThrone using Tapatalk

Yep. I have a picture somewhere showing the wiring harness I had to make.
It was ridiculous

[Lowndex]

The problem with the LED strips is you will run out of real estate as you get toward the ends of the spoiler. It is very cramped in there.

I'm kind of interested in making one now

Name your price.

[justbob]

Yep. I have a picture somewhere showing the wiring harness I had to make.

It was ridiculous


Figured as much. I could only imagine..


Sent from my iThrone using Tapatalk

[lji372]

Ahah vacation dollars talking now. :lol:

[RubberCtyRauder]

Jerry, make a jig to hold it in that there Haas machine and drill program or mill program

[Mebot]

Will there be a group buy for this?

Can't stop the signal...

[martyo]

Guessing 8 hrs of labor @ $50.00 / hr = $450


Common core math for the win!!!!

[03blackvegas]

In picture format. [emoji6]
http://images.tapatalk-cdn.com/15/12/24/b351b4e5f252b55f76edcf3948c20d b7.jpg
http://images.tapatalk-cdn.com/15/12/24/b6a96942cbc28e1432b6aaeb99d343 e3.jpg
http://images.tapatalk-cdn.com/15/12/24/29518233c8a34c460912eadc38c94a 15.jpg
http://images.tapatalk-cdn.com/15/12/24/afb289f4d00e98ec44f68f122968fb 24.jpg
http://images.tapatalk-cdn.com/15/12/24/14b0b4fb33b24f48af7c234652a519 1c.jpg


Sent from my iThrone using Tapatalk
What is this black suppose to match?

[Spectragod]

Because it looks awesome and it's wonderful.

I want one (or 4) too!!

If you want to provide me a couple of spoilers..... I can/and will do it for you Jerry.

[lji372]

If you want to provide me a couple of spoilers..... I can/and will do it for you Jerry.


For a double dutch rudder thingy
#winning

[RubberCtyRauder]

For a double dutch rudder thingy
#winning

That'll be Darrins custom coil cover. DDR :D

[1Marauder]

I wonder if it could be made less labor intensive by carving out a solid area instead of individual holes and using a flexible LED strip.

* A router bit with a custom guide to roll along the top surface of the spoiler should work well.





* Not knowing anything about the internal construction of the stock spoiler.


I was thinking the same thing!

[1Marauder]

I am very interested too. In two of them! One Silver and one Black!

[1Marauder]

[QUOTE=Lowndex;1478005]Zach,

I would love my rear spoiler to look like lji372's. Will you build one for me, sir?
I hope you say yes and specify the $.

http://imagizer.imageshack.us/v2/800x600q90/910/kwEzoF.jpg (https://imageshack.com/i/pakwEzoFj)



What a calm and serene looking Marauder!

[2mercs]

That'll be Darrins custom coil cover. DDR :D
DTR powered by DDR on the covers.

[Jolly Roger]

The problem with the LED strips is you will run out of real estate as you get toward the ends of the spoiler. It is very cramped in there.

I'm kind of interested in making one now

Alright guys/girls,
You've succeeded in drawing him out and peeking his interest.
Now gang tackle him and stuff his pants with $$$$$ before he gets away. :);):P

[Lowndex]

I asked him to name his price. The decision lies with him.

[8UWITH6]

Stop poking the bear............... LOL

[8UWITH6]

Guessing 8 hrs of labor @ $50.00 / hr = $450
Common core math for the win!!!!


Common core math for the win!!!!

No student left behind!:D

[chief455]

I asked him to name his price. The decision lies with him.

I think Zack likes money, but takes a project based on personal satisfaction vs difficulty/reward of the mod.
He has to 'want' to do it.
I'd love mine done, but doubt anyone will 'mass produce' this mod.

[lji372]

I think Zack likes money, but takes a project based on personal satisfaction vs difficulty/reward of the mod.
He has to 'want' to do it.
I'd love mine done, but doubt anyone will 'mass produce' this mod.

Hmmmm :rolleyes:

[chief455]

Hmmmm :rolleyes:

Commitment poll, min order qty, and deposits? :confused:
I'LL DO IT! Just need a projected price....:cool:

[8UWITH6]

I would not reproduce something that made my car completely unique from every other car out there for any price. But that is just me. ;) Carry on.

[lji372]

I would not reproduce something that made my car completely unique from every other car out there for any price. But that is just me. ;) Carry on.

Lies all lies....

Follow the money

Supply and demand

Oh, like floating center caps? Gotcha :lol:

[Spectragod]

I would not reproduce something that made my car completely unique from every other car out there for any price. But that is just me. ;) Carry on.

That's why I'll do Jerry's and maybe 1 for me, it stops being unique when every one has it.

[Joe Walsh]

I would not reproduce something that made my car completely unique from every other car out there for any price. But that is just me. ;) Carry on.


EXACTLY!!!

Who wants to spend all that time, effort and money to create such a cool mod then start selling them to everyone.
That's one of the reasons I love modding my Marauder and why I even bought a Marauder!
I like driving something more rare and different than a Toyota Camry....:shake:....:snore:

Maybe when Zack is retired and bored and no longer driving his Marauder...(:eek:)....then he'll start emptying your pockets for the custom rear spoiler....:P

[lji372]

EXACTLY!!!

Maybe when Zack is retired and bored and no longer driving his Marauder...(:eek:)....then he'll start emptying your pockets for the custom rear spoiler....:P

He doesn't drive that car now :confused:

[Zack]

I think I'll make one, install it on my car and post lots of pics
Then I will tell all interested parties to ***

Has anyone used the knockoff spoilers on eBay? They are only a hundred bucks

[lji372]

I think I'll make one, install it on my car and post lots of pics
Then I will tell all interested parties to ***

Has anyone used the knockoff spoilers on eBay? They are only a hundred bucks

Haha he's back out of retardedment :banana2:

[Joe Walsh]

...



http://i984.photobucket.com/albums/ae326/JoeJWalsh/RicerTard%20Wing_zpshvi0w14p.p ng (http://s984.photobucket.com/user/JoeJWalsh/media/RicerTard%20Wing_zpshvi0w14p.p ng.html)

:hmmm: ...... DARN!!


Too thin to drill holes for the LEDs!

[guspech750]

I think I'll make one, install it on my car and post lots of pics
Then I will tell all interested parties to ***

Has anyone used the knockoff spoilers on eBay? They are only a hundred bucks

All I heard was "wha wha wha wha ***".

Where is it? Who's hungry?

[1Marauder]

I would not reproduce something that made my car completely unique from every other car out there for any price. But that is just me. ;) Carry on.



I am not sure that selling 20 units to a very limited group of people accross the country would diminish a modded Marauders uniqueness. Maybe if someone started selling to crown vics, this would make more sense.

Zack's LED Tail fin makes that cor look much more modern and contemporary.

Really cool look.

[8UWITH6]

Lies all lies....

Follow the money

Supply and demand

Oh, like floating center caps? Gotcha :lol:

You know me too well. I do like money but it has to be worth it.

[8UWITH6]

I am not sure that selling 20 units to a very limited group of people accross the country would diminish a modded Marauders uniqueness. Maybe if someone started selling to crown vics, this would make more sense.

Zack's LED Tail fin makes that cor look much more modern and contemporary.

Really cool look.

I guess what I meant to say is go make your own custom rear spoiler if you want one. Get out in the garage/shop and create something instead of begging someone to make something for you.

Yes, the spoiler is amazing and is a really cool look. You should see it in person. :beer:

[8UWITH6]

Get creative & do something unique to you instead of copying what someone else already did.

Or this ;)

[Finally]

I am not sure that selling 20 units to a very limited group of people accross the country would diminish a modded Marauders uniqueness. Maybe if someone started selling to crown vics, this would make more sense.

Zack's LED Tail fin makes that cor look much more modern and contemporary.

Really cool look.

NOT for Crown Vic's,proof of Marauder ownership required for a sale. "Lol"
If these came available I'd love to own one also.

[RubberCtyRauder]

My observation is if you want one, you are probably going to have to build it yourself or find a local auto customizer to discuss about building. That should be easy for the Cali members..custom builders all over cali. be prepared to pay $$$ wherever you are. Although I do think it looks good, I'm not going to pay $700-1000 for a spoiler.

[Lowndex]

My observation is if you want one, you are probably going to have to build it yourself or find a local auto customizer to discuss about building. That should be easy for the Cali members..custom builders all over cali. be prepared to pay $$$ wherever you are. Although I do think it looks good, I'm not going to pay $700-1000 for a spoiler.


It's made by Zach or I do without.

[2mercs]

It's made by Zach or I do without.
Kepp spelling his name wrong and hes going to tell you to get stuffed.

[Limited360]

$1000 is my offer to make these.

Requires min of 5 people with 50% cash upfront. 6-8 week lead time on the units from date of order till date of shipment.

[RubberCtyRauder]

I want projectors before I want spoiler led's....:D

[Fastbob]

Wonder if the 3rd brake light from a Lincoln MKZ could be modified to fit into or onto a spoiler. I may do some measuring cause the wife has a 2014 MKZ sitting in the garage next to the Marauder. The Lincoln 3rd brake light has plenty of LEDs, but there might be too much curve to deal with.

[03blackvegas]

I've got a call in to Chip, yes that Chip, he's going to do some brainstorming on this and get back to me. I told him, since there's no more overhaulin', he should have some time.

[chief455]

$1000 is my offer to make these.

Requires min of 5 people with 50% cash upfront. 6-8 week lead time on the units from date of order till date of shipment.


I've got a call in to Chip, yes that Chip, he's going to do some brainstorming on this and get back to me. I told him, since there's no more overhaulin', he should have some time.
Somehow I doubt making those shows took much of his working time ;)
What question needs to be clear is: must we send in our painted, or a new spoiler - or will the LED conversion be done to a spoiler provided by the builder?

[Limited360]

I want projectors before I want spoiler led's....:D

... would it shock you if I said I was 1-2 weeks out from taking orders? :banana::banana::banana::banan a:

[Limited360]

Somehow I doubt making those shows took much of his working time ;)
What question needs to be clear is: must we send in our painted, or a new spoiler - or will the LED conversion be done to a spoiler provided by the builder?

To rule out any headaches with used bits... I would supply a new spoiler with paint matched to DBP, DTR, Silver, Black. NON-OEM spoiler obviously since they are unobtanium, aftermarket reproduction.

[Limited360]

Wonder if the 3rd brake light from a Lincoln MKZ could be modified to fit into or onto a spoiler. I may do some measuring cause the wife has a 2014 MKZ sitting in the garage next to the Marauder. The Lincoln 3rd brake light has plenty of LEDs, but there might be too much curve to deal with.

Make sure you find the LED driver for that if you plan to utilize it.

[RubberCtyRauder]

... would it shock you if I said I was 1-2 weeks out from taking orders? :banana::banana::banana::banan a:

Awesome !:banana::banana2::eek:

[Spectragod]

... would it shock you if I said I was 1-2 weeks out from taking orders? :banana::banana::banana::banan a:

For my F350???????? Awesome.......

[Limited360]

For my F350???????? Awesome.......


You would say that...


Sent from my iPhone using Tapatalk so I may sound retarded.

[Spectragod]

You would say that...


Sent from my iPhone using Tapatalk so I may sound retarded.

Well yeah....:D

[Limited360]

Well yeah....:D


Only payment I take is a double Dutch rudder buddy...


Sent from my iPhone using Tapatalk so I may sound retarded.

[RubberCtyRauder]

I got a F 350 too. 1995 Old school, long before projectors. Certainly could use help in the lighting area.

[chief455]

... would it shock you if I said I was 1-2 weeks out from taking orders? :banana::banana::banana::banan a:
I don't remember seeing a price or if you supply repops, we send our lights for the conversion?

To rule out any headaches with used bits... I would supply a new spoiler with paint matched to DBP, DTR, Silver, Black. NON-OEM spoiler obviously since they are unobtanium, aftermarket reproduction.

Good strategy. Plug n play to the brake light harness?
Allows us to return to stock / sell the LED spoiler as well.
I will likey be in on these. Both are nice, modern upgrades.

[Lowndex]

This thread is done. Zack does not wish to pursue the project ($1200.00) and no one else has the skill. So, let's move on.

[RubberCtyRauder]

How do you know no one else has the skills needed? James (limited360) is a led guru as well as FBM. It's not a lucrative project or cost effective for most that's why there is only 2 out there. I could build one if I wanted, I routinely work within .0005 of an inch and can eyeball something .025 of inch out of spec. so don't say no one else has the skill or you might be building the rest of your car by google searches.

[Mebot]

To rule out any headaches with used bits... I would supply a new spoiler with paint matched to DBP, DTR, Silver, Black. NON-OEM spoiler obviously since they are unobtanium, aftermarket reproduction.
Was about to ask you if we needed to provide our own spoiler or if that cost included a spoiler

Can't stop the signal...

[MarauderMatt200]

Common core math for the win!!!!

nice catch LMAO Im assuming the extra $50 was a tip? lol

[MarauderMatt200]

just caught up reading the whole thread...Looks like someone is willing to do this if we pay $1000, that includes the spoiler and matched OEM paint. Is that correct? if so I may be in as well. How hard would it be to install the rear spoiler and run the wires to hook up the LED's?

[martyo]

nice catch LMAO Im assuming the extra $50 was a tip? lol

I though the $50 above the common core math amount of $450 was the tip. :confused:

[MOTOWN]

This thread is done. Zack does not wish to pursue the project ($1200.00) and no one else has the skill. So, let's move on.

This is just hilarious! If i wanted a spoiler with the led mod i could build it myself, and to an oem looking quality, time after time you continue to put your foot squarely in your mouth, and show just how clueless you really are.

You have no idea of anyone's skill set on this site.

[Bad_S55]

This is just hilarious! If i wanted a spoiler with the led mod i could build it myself, and to an oem looking quality, time after time you continue to put your foot squarely in your mouth, and show just how clueless you really are.

You have no idea of anyone's skill set on this site.

^^^Truth^^^

[O's Fan Rich]

NOT for Crown Vic's,proof of Marauder ownership required for a sale. "Lol"
If these came available I'd love to own one also.

Just for that... I'd buy one now.

[O's Fan Rich]

This thread is done. Zack does not wish to pursue the project ($1200.00) and no one else has the skill. So, let's move on.

Really? Wow.
Unless... this is a "reverse psychology" thing and you're just trying get someone pissed off enough to show you..... perhaps a well played move on your part.

[justbob]

Even Zack is rolling around laughing and wowing at that comment!

Good luck on your build now! [emoji106]🏻


Sent from my iThrone using Tapatalk

[8UWITH6]

This thread is done. Zack does not wish to pursue the project ($1200.00) and no one else has the skill. So, let's move on.

I guess you have never seen the sideview mirrors Limited360 did for Jerry's daily driver Marauder. Check out his projector thread. I would say he is more than capable of doing this project. And apparently he is 200 bucks cheaper! ;)

A grand for a spoiler, dang......... I guess you gotta pay to play.

[Joe Walsh]

A grand for a spoiler, dang......... I guess you gotta pay to play.

+1 !

I don't need LEDs in my spoiler THAT badly!

[chief455]

+1 !

I don't need LEDs in my spoiler THAT badly!

difficult to jusify, for sure.
I bet the spoiler, and paint to match is ~half the grand - so a nickel to install the LEDs becomes reasonable. For us with no ability to do it themselves....

[Limited360]

difficult to jusify, for sure.

I bet the spoiler, and paint to match is ~half the grand - so a nickel to install the LEDs becomes reasonable. For us with no ability to do it themselves....


Exactly... And at $500 that's not many hours of work compared to some people regular income... So has to be worth it to the builder too [emoji7][emoji7]


Sent from my iPhone using Tapatalk so I may sound retarded.

[Lowndex]

This is just hilarious! If i wanted a spoiler with the led mod i could build it myself, and to an oem looking quality, time after time you continue to put your foot squarely in your mouth, and show just how clueless you really are.

You have no idea of anyone's skill set on this site.

Thank you for the New Year wishes. Keep the positive thoughts coming.

Your biggest fan

[Lowndex]

How do you know no one else has the skills needed? James (limited360) is a led guru as well as FBM. It's not a lucrative project or cost effective for most that's why there is only 2 out there. I could build one if I wanted, I routinely work within .0005 of an inch and can eyeball something .025 of inch out of spec. so don't say no one else has the skill or you might be building the rest of your car by google searches.

My saying the thread was done clearly associated Zack does not wish to build another one. No offense was intended toward other's skill to do so.

[Lowndex]

^^^Truth^^^

Trolls abound. :flamer:

[Lowndex]

Really? Wow.
Unless... this is a "reverse psychology" thing and you're just trying get someone pissed off enough to show you..... perhaps a well played move on your part.

Not my intent. I asked Zack to build something; not anyone else. Seeing negative where there is/was none is the sign of a small mind.

[ChiTownMaraud3r]

Never understood the craze over this, looks very 93 cadillac seville-ish IMO.

Would be interesting to have a light bar at the top of the rear window, now this is modern looking.
http://theasphaltproject.com/wp-content/uploads/2015/04/3rd-brake-light-on-BMW-6-Series-Gran-Coupe.jpg

[chief455]

Never understood the craze over this, looks very 93 cadillac seville-ish IMO.

Would be interesting to have a light bar at the top of the rear window, now this is modern looking.
http://theasphaltproject.com/wp-content/uploads/2015/04/3rd-brake-light-on-BMW-6-Series-Gran-Coupe.jpg

Cool, and trailer park Christmas light-ish at the same time :)

[fastblackmerc]

How do you know no one else has the skills needed? James (limited360) is a led guru as well as FBM. It's not a lucrative project or cost effective for most that's why there is only 2 out there. I could build one if I wanted, I routinely work within .0005 of an inch and can eyeball something .025 of inch out of spec. so don't say no one else has the skill or you might be building the rest of your car by google searches.

Might be something I'd attempt when I finally retire..................

Maybe a "sparkely" grill too!

[RubberCtyRauder]

Oh no, not the sparkly grille!!!!:D you had to bring that up :D

[lji372]

Oh no, not the sparkly grille!!!!:D you had to bring that up :D

where do i get a sparkly grill???

(memes welcome)

[RF Overlord]

Is that BMW Plasti-Dipped?

[RubberCtyRauder]

where do i get a sparkly grill???

(memes welcome)

I believe you are intimately familiar with the creator

[RubberCtyRauder]

Is that BMW Plasti-Dipped?

It's prolly a euro color not offered here. That's my guess

[ChiTownMaraud3r]

Is that BMW Plasti-Dipped?

http://i1298.photobucket.com/albums/ag54/jasonweremy2012/Plasti%20Dip/Other/3gc9b_zps7583534b.jpg

[lji372]

can he make a rainbow one with blue and red led's.

i'd also like a switch that turns off my tail lights :D

[Bad_S55]

i'd also like a switch that turns off my tail lights :D

Trying to make escaping from Johnny Law a little easier I see :rolleyes:

[Spectragod]

can he make a rainbow one with blue and red led's.

i'd also like a switch that turns off my tail lights :D

Both of these "want's" are obtainable, you know my address, or did you want me to drive up there and do it? And if I need to come to you, we may as well do a brake light kill in every car there.:D

[Spectragod]

I though the $50 above the common core math amount of $450 was the tip. :confused:

I thought they wanted you to "round up" with common core?

[martyo]

I thought they wanted you to "round up" with common core?

I thought only cowboys round up!

[Spectragod]

I thought only cowboys round up!

And common core, somehow that's how you do those math equations, you ought to research it, it's beyond stupid.

[martyo]

And common core, somehow that's how you do those math equations, you ought to research it, it's beyond stupid.

I don't need to get any spider. :help::help:

[lji372]

I've wanted one of these since I saw it.

I couldn't help myself, had to try.



8tznZXxezk4&sns=em

[RubberCtyRauder]

I've wanted one of these since I saw it.

I couldn't help myself, had to try.



8tznZXxezk4&sns=em

Looks awesome wired to that wire edm machine, every tool shop will want one.:beer:

[a_d_a_m]

That came out pretty good, Jerry.

[Lowndex]

I've wanted one of these since I saw it.

I couldn't help myself, had to try.



Looks good. How $ to make one for me?

[TJCOX]

Zach,

I would love my rear spoiler to look like lji372's. Will you build one for me, sir?
I hope you say yes and specify the $.

http://imagizer.imageshack.us/v2/800x600q90/910/kwEzoF.jpg (https://imageshack.com/i/pakwEzoFj)

Anyone else interested?

I might be interested. From a safety standpoint, if it prevents someone from rear ending you, I would say it's worth every dollar.

Fairlaner

[SteelQualityMan]

I love it. I had something very similar on my 1996 Mercury Cougar. I don't remember if it was Factory or a dealer add-on. Sign me up.

Sent from my LG-H901 using Tapatalk

[lji372]

Every day it's a getting closer
going faster than a roller coaster


44519

[Zack]

That looks nice. Make sure its 100% water tight in back

[lji372]

That looks nice. Make sure its 100% water tight in back

will do :2thumbs:

[lji372]

44520


I'm getting giddy

[MMBLUE]

44520


I'm getting giddy

C'mon man.... That was just a tease :P

[lji372]

it's currently baking. hopefully will be on for mv :D

[daddyusmaximus]

Absolutely beautiful. I love that it is bright enough to really catch your attention too. Not just to look cool, but to keep some idiot from ass ending you. If it wasn't so expensive I'd be begging for one.

And for the record, I'm one of the guys who doesn't have the skill to do this myself...

[MOTOWN]

Looking forward to seeing this in person!

[lji372]

Last update until next week....

44522

[Joe Walsh]

Last update until next week....

44522

Badazz looking!!!

Very nice job.

:bows:

[Chayton]

Last update until next week....

44522

ZOO WEE MAMA!

[2mercs]

Last update until next week....

44522
This makes my pants a little tighter.

[RubberCtyRauder]

That's bad a$$, Jerry. wrong color, needs to be SilverBirch ...for me:D

[Gryphonzus]

As usual Jerry an awesome looking piece. Now I see why I get no Marauder big brakes. Cannot wait to see it in person!!:banana2:

[loud2004marquis]

Very nice, looks great!

[parker]

When you going to build one for the rest of us?

[Zack]

He's not building anymore.
Some things have to remain unique

[parker]

He's not building anymore.
Some things have to remain unique



Looks like I'll just have to build my own then.

[lji372]

Looks like I'll just have to build my own then.

nobody is stopping anybody from making their own anything, good luck :beer:



He's not building anymore.
Some things have to remain unique

i have not decided this yet..................

[Spectragod]

nobody is stopping anybody from making their own anything, good luck :beer:









i have not decided this yet..................



But if he does, with what it takes to make one, bet on close to 1k, lots of time, paint work and expensive materials...


Sent from my iPhone while doing a big ole' smokey burnout in my wife's Prius.

[lji372]

Oops I did it again :dunno:

This time for blue!!!!

https://uploads.tapatalk-cdn.com/20170705/3eaa50175d5dfd1760449530e5a456 c4.jpghttps://uploads.tapatalk-cdn.com/20170705/c0c241987cec135ace1cd6771eed33 c0.jpg


Sent from my iPhone using Tapatalk

[Lowndex]

How much to build one for me, please? I want the brightest red leds possible. I have been re-ended three times in my little Smartcar. I am afraid I will kill someone if they rear-end my Marauder.

[camelgrundle]

Very nice Jerry!

[1Marauder]

My biggest fear.

Yes please.

You know me, one in silver and one in black please. I have the oem spoilers if you prefer oem to aftermarket.

[camelgrundle]

P.s. I like your business card in the background.

[martyo]

How much to build one for me, please? I want the brightest red leds possible. I have been re-ended three times in my little Smartcar. I am afraid I will kill someone if they rear-end my Marauder.

I am not a lawyer but do play one on TV occasionally and I would think this is not a great idea for a post.

[Ambitious1]

Oops I did it again :dunno:

This time for blue!!!!

https://uploads.tapatalk-cdn.com/20170705/3eaa50175d5dfd1760449530e5a456 c4.jpghttps://uploads.tapatalk-cdn.com/20170705/c0c241987cec135ace1cd6771eed33 c0.jpg


Sent from my iPhone using Tapatalk


Looks awesome!!!

[justinpsmith]

Oops I did it again :dunno:

This time for blue!!!!

https://uploads.tapatalk-cdn.com/20170705/3eaa50175d5dfd1760449530e5a456 c4.jpghttps://uploads.tapatalk-cdn.com/20170705/c0c241987cec135ace1cd6771eed33 c0.jpg


Sent from my iPhone using Tapatalk



I would think the aftermarket world would have the split brake light turn signal lights to do one by now too. That is how I would like mine if I got one.


Sent from my iPhone using Tapatalk

[lji372]

I would think the aftermarket world would have the split brake light turn signal lights to do one by now too. That is how I would like mine if I got one.


Sent from my iPhone using Tapatalk

Show us how it's done :2thumbs:

Maybe you could use the rainbow controller :D

[martyo]

Show us how it's done :2thumbs:

Maybe you could use the rainbow controller :D

Be careful what you say. There are hypersensitive folks around here.

[lji372]

Be careful what you say. There are hypersensitive folks around here.



0FG

:dunno:

[justinpsmith]

0FG



:dunno:



How many inches is that Led strip you put on that one?


Sent from my iPhone using Tapatalk

[Lowndex]

Show us how it's done :2thumbs:

Maybe you could use the rainbow controller :D

That would sell well in San Francisco. :)