New LED tail lights installed

[sparker_1982]

43088 Just installed new led tail lights. Made for Crown Vic but connectors are the same just got to install resistors so lights dont flash as fast.

[RubberCtyRauder]

You going to paint the chrome? post a vid of the lights on/flashing/turn signal would be cool

[MOTOWN]

It would look a lot better if you painted the chrome to match the car like the oem tail lights.

[sparker_1982]

Id like to figure out if I can just switch the chrome out with the SB piece from my old tail lights without breaking it.Otherwise I will probably just Plastidip it.I wont lie though the chrome is kinda growing on me.

[sparker_1982]

Will post night time pics later on today

[RubberCtyRauder]

the chrome and painted piece is part of the assembly, they are not interchangeable..

[crownvic05]

Looks very nice. I would like to see them in action.

[FastMerc]

I did not know crown vics had led lights???

[Sully008]

These are aftermarket ones from eBay. There are several options on there.

[crownvic05]

If im not mistaken, isent the last row on the bottom portion for turn signal?

[RubberCtyRauder]

If im not mistaken, isent the last row on the bottom portion for turn signal?

it looked like more than 1 style now..clear lens at bottom, but now I see the smoked one like op has also has a celar lens on bottom but it is smoked/tinted

[sparker_1982]

43090 heres the nightime view

[Bad_S55]

Those are rad!!!

[lji372]

I dig'm......

[Lowndex]

Those look awesome. Enjoy.

[MarauderMatt200]

very cool!!

[FastMerc]

These are aftermarket ones from eBay. There are several options on there.


Checked ebay found nothing, found lots for other cars though!

[sparker_1982]

http://www.ebay.com/itm/Smoke-Fits-1998-2011-Ford-Crown-Victoria-Led-Tail-Lights-Tail-Lamps-Left-Right-/381408049378?fits=Model%3ACrow n+Victoria&hash=item58cdb0f8e2:g:HTsAAOSw VL1V~HZf&vxp=mtr

[sparker_1982]

Keep in mind these are made for crown vics but these are plug and play for the merc.I just have to tweak the resistance to get the flasher to work right.Its too fast.

[FastMerc]

Keep in mind these are made for crown vics but these are plug and play for the merc.I just have to tweak the resistance to get the flasher to work right.Its too fast.

Thanks for info not a bad price!

[ChiTownMaraud3r]

I have a red set of these laying around I need to get to tinting. Should be pretty legit.

[FastMerc]

Keep in mind these are made for crown vics but these are plug and play for the merc.I just have to tweak the resistance to get the flasher to work right.Its too fast.

What do you mean by this?

[crownvic05]

So whats in the bottom row of the tail light?

[Limited360]

What do you mean by this?


In assuming the flash is still to fast and it needs more resistance in the system? Or flip side... Too slow and needs less...


Sent from my iPhone using Tapatalk so I may sound retarded.

[Limited360]

I have a red set of these laying around I need to get to tinting. Should be pretty legit.


Don't tint... Open... Paint chrome... Reinstall...

Bulbs just as bright, get the benefit of being bright ass LED's


Rant off.


Sent from my iPhone using Tapatalk so I may sound retarded.

[fastblackmerc]

What do you mean by this?

With LED's there is less resistance in the "system" so the LCM thinks there is a bulb out and the turn signals flash faster than normal to alert to the fact that there is a bulb out.

Fixed with either installing resistors(s) or an electronic flasher.

[sparker_1982]

BTW they are already smoke tinted.I think they look good just as they are.Look way meaner than OEM tail lights to me.Theres nothing on the bottom of these.The top LED lights are the flasher.I tried to post a vid of them blinking but something with the forum wouldnt allow.Lol I probably just dont know what im doing.

[Bob Mathis]

What I found was some that had black trim all so.

[RubberCtyRauder]

Does the bottom part of lens have a smoked clear section or is it all smoked red

[ChiTownMaraud3r]

Don't tint... Open... Paint chrome... Reinstall...

Bulbs just as bright, get the benefit of being bright ass LED's


Rant off.


Sent from my iPhone using Tapatalk so I may sound retarded.

James, they are sealed like oem lamps.. :(

I am doing vinyl as it is cheap, doesn't need to be polished, wet sanded etc, and should have better transparency than paint even though I'm going with a very light tint. I want to look more OEM. I was also thinking of adding V3 triton red LEDs just for brake lamp on the chrome section..Not sure if worth it..

[FastMerc]

I just saw a Crown with those lights they look cool.

[FastMerc]

I was looking for other brands but haven't found any. I have to wait till motor is fixed first :D

[daddyusmaximus]

These lights are pretty good sizes units. You'd think the manufacturer could incorporate the proper electronic resistance to get the flashers to work. Even if the cost is a bit more there needs to be a plug and play option.

[Limited360]

James, they are sealed like oem lamps.. :(

I am doing vinyl as it is cheap, doesn't need to be polished, wet sanded etc, and should have better transparency than paint even though I'm going with a very light tint. I want to look more OEM. I was also thinking of adding V3 triton red LEDs just for brake lamp on the chrome section..Not sure if worth it..

OEM sealing doesn't mean much, especially on a china knock off tail light, I am sure 15 minutes @ 195F in the oven would open them right up :banana:


These lights are pretty good sizes units. You'd think the manufacturer could incorporate the proper electronic resistance to get the flashers to work. Even if the cost is a bit more there needs to be a plug and play option.

I can easily order sets and add the resistor to the circuit for those that need plug and play options. Would come at a cost however.

Could offer resistor installed (one which does not require mounting to metal for heat dissipation) and also painting the inside chrome...

PM me if seriously interested and I can work up a price point.

[Vortech347]

Considering the OEM lights are already unique to the car being tinted I'm not seeing the benefit in this? It certainly isn't cosmetic in my opinion. They look cheap and don't really accent anything. Just make sure you keep your existing ones for when you sell the car.

[SteelQualityMan]

Has anyone checked to see if those are DOT legal? Just saying...

Sent from my LG-H901 using Tapatalk

[ChiTownMaraud3r]

Mine are DOT approved and came with flasher/resistance box, plus look more oem than the euro altezza chrome ones.

The main benefit here is the increased performance/output compared to an incandescent, and the fact you are bringing the car up to date on lighting technology. You have to admit, the oem lights are a joke when compared to newer vehicle's outputs.

Next up is finishing my HID projector retrofits, and install a bright brake light LED bar in the top of the back window.

[FastMerc]

Mine are DOT approved and came with flasher/resistance box, plus look more oem than the euro altezza chrome ones.

The main benefit here is the increased performance/output compared to an incandescent, and the fact you are bringing the car up to date on lighting technology. You have to admit, the oem lights are a joke when compared to newer vehicle's outputs.

Next up is finishing my HID projector retrofits, and install a bright brake light LED bar in the top of the back window.

What brand are yours?

[daddyusmaximus]

That's one thing that I like about LEDs... how bright they are. I plan to upgrade to LED tail lights in the future to improve the viability of the car from the rear.

Sent from my SM-N910V using Tapatalk

[ChiTownMaraud3r]

What brand are yours?

Mine are DTMoto.

[FastMerc]

Mine are DTMoto.


Is there a website?

[Turbov6Bryan]

Is there a website?

Website takes you to eBay

I don't see resistor box

Napa sells electronic flashers, I've used them on my trucks. Does the LCM contain the flasher or is it external like older cars?

Here is DT MOTO eBay sellers page

http://m.ebay.com/itm/Fits-1998-2011-Ford-Crown-Victoria-Red-Clear-Led-Tail-Lights-Taillamp-Left-Right-/381534918180?nav=SEARCH

[Turbov6Bryan]

Here is DT MOTO BLACK not CHROME tail lights

http://www.ebay.com/ulk/itm/131702373192

[RubberCtyRauder]

Wish they didn't have the clear portion on bottom..Marauders don't use that port for turn signals like the early LX had with an amber lens there. Funny, the DTmoto webpage that I saw, and it was not ebay listed no CV stuff

[daddyusmaximus]

Is there a LED option for the third brake light?

[RubberCtyRauder]

Is there a LED option for the third brake light?

Fastblackmerc can make them, need to send him yours though or buy one used on here or ebay and send and swap..that's what I am gonna do .

[NXSBOB]

Will post night time pics later on today
Please post pictures of lights in the daylight.
Thanks

[fastblackmerc]

Is there a LED option for the third brake light?


Fastblackmerc can make them, need to send him yours though or buy one used on here or ebay and send and swap..that's what I am gonna do .

Yes, RubberCtyRauder is correct.... I can upgrade your CHMSL (Center High Mounted Stop Light) with LEDs and even a "MARAUDER" overlay!

[fastblackmerc]

Wish they didn't have the clear portion on bottom..Marauders don't use that port for turn signals like the early LX had with an amber lens there. Funny, the DTmoto webpage that I saw, and it was not ebay listed no CV stuff

I had the same question. I'm waiting to hear back from the eBay lister. I'm going to get a set and play around with them.

[lifespeed]

Nice! A good item to add when painting or touching up.

[Limited360]

I'll offer up the service of opening these up and strip/paint the chrome to make them less ricer... If anyone is interested. PM me...

Assume a charge of $75 including the ride back to you.



Sent from my iPhone using Tapatalk so I may sound retarded.

[ChiTownMaraud3r]

You can also just red vinyl the bottom clear strip which isn't used.

[fastblackmerc]

You can also just red vinyl the bottom clear strip which isn't used.

I'm going to put in red LEDs and see if I can tint (red) the lenses inside.

[junior]

I'm going to put in red LEDs and see if I can tint (red) the lenses inside.

I'm not sure how well these would hold up to heat but....

http://www.amazon.com/Krylon-Stained-Glass-Paints-Aerosol/dp/B000QD9NYA

http://www.summitracing.com/parts/vht-sp888?seid=srese1&gclid=CKeJ9NTD3soCFc2CfgodBKUB vg

[Vortech347]

I'll offer up the service of opening these up and strip/paint the chrome to make them less ricer

Good luck.

[Limited360]

Stain glass paint will work fine. That is what people use on glass to make foglamps yellow at times.


Sent from my iPhone using Tapatalk so I may sound retarded.

[Limited360]

Good luck.


Something you know that I do not? I doubt these are permasealed...


Sent from my iPhone using Tapatalk so I may sound retarded.

[fastblackmerc]

Something you know that I do not? I doubt these are permasealed...


Sent from my iPhone using Tapatalk so I may sound retarded.

If they are like the stock ones they are ultrasonically welded.

[NXSBOB]

If they are like the stock ones they are ultrasonically welded.
The same as headlights?

[Limited360]

If they are like the stock ones they are ultrasonically welded.


These are cheap China tails... Highly doubt they are ultrasonically welded.

Pictures from anyone with a set in hand?


Sent from my iPhone using Tapatalk so I may sound retarded.

[fastblackmerc]

The same as headlights?

Headlight are stuck together with butyl rubber... I think. The same stuff used as windshield sealer.

[ChiTownMaraud3r]

The LED aftermarket lamps are actually pretty decent quality and seem to be plastic welded. I would use something like this, just on the lower strips. But I don't mind the bottom chrome part after slight tinting of the entire thing.
http://www.ebay.com/itm/12-Colors-12-x-24-Smoke-Headlight-Taillight-Fog-Light-Tint-Film-Vinyl-Wrap-/400768973925?var=670315773035&hash=item5d4fb13c65:m:mgjd-D63bh_fXFOArO03oNg&vxp=mtr

[sparker_1982]

43160Sorry it took so long to post these I been working like a madman.In my opinion they are pretty good quality and I havent had a problem with them yet.I thought about getting the chrome painted but its grown on me because I think it matches my chrome bumper lettering and chrome license plate bezel quite well.This summer I may experiment and plasti dip the chrome but for now i'm happy.The whole thing is smoke and it goes really well with the SB paint.These I think would only go good with the SB and black marauders but hey everybody is entitled to their own opinion.I didnt notice before but you can twist the out the bottom inserts to install more lights.

[fastblackmerc]

My set with black lower trim piece just arrived yesterday. Exploring options for the clear lens portion.

Appear to be well made.

[sparker_1982]

Did u get them from DTMOTO?

[sparker_1982]

PIX please I was hesitant to get mine because alot of members were crapping on the LED smoke set up but then I was like u know what Ive always been the rebelious type of guy so I said F@#K what the marauder forum guys were hating on lol.As it turns out my SB PUNI5HR got lots of compliments

[Vortech347]

Something you know that I do not? I doubt these are permasealed...


Sent from my iPhone using Tapatalk so I may sound retarded.

Nope, I don't know a damn thing about them. My comment wasn't good luck to the method. It was good luck to making them less ricer.

[ChiTownMaraud3r]

If anyone is considering these, the running to brake or running to turn signal difference in light output is a joke. Barely noticeable increase from running voltage to full voltage..IMO unacceptable.

Additional work is necessary to make it safer, and less aftermarketish. I have several possible solutions.. not sure what I'll end up following through with at this point. I have a video I can post later.

[Red Rum]

I just looked at them. But it is saying there not compatible with the rear 2 plug tail lights. It is showing 4 holes in the rear tailight. I would get the front and back smoke for my car. But wanna make sure they can work.

[RubberCtyRauder]

What is a PUNI5HR?

[sparker_1982]

Its stands for Punisher