SS braided brake hose kit

[Todd TCE]

Greetings everyone.

I recently made a run of hose kit brackets that will be out for zinc plate tomorrow. Given sales volume of the ss hose kits the past year or so...I think this could be the final batch of these.

Won't say we won't ever make more but once they are gone it could be a pre order qty basis next run. Having an inventory of hoses, fittings and brackets on the wall..packaged and such is nice but it's cash money doing nothing but collecting dust.

I know there are only so many of you doing hoses or the Zack kits etc so you may want to get in on this run soon. I think we have enough brackets for about 20 hose kits total.


*I'll put up fair warning when the qty gets down to 3-4 also

[Turbov6Bryan]

I just purchased a Zack big brake hose kit

Paid via PayPal and left instructions where to ship them

Thank you

[myrodr]

I would like a price on these please

[martyo]

Does this impact both the Zack brake kit and the standard lines?

[510paesan]

I would like a price on these please

Likewise. I would want a kit before these run out

[Turbov6Bryan]

I would like a price on these please

http://www.tceperformanceproducts.com

[ledzilla]

I've been wanting to get a set of these since I got the big brake brackets from Jerry, but withbthe work I've had to do on all three cars I haven't been able tondo so yet. Are these brackets typically part of the Zack kit? And in case I'm not able to grab that kit in full soon enough, would it be wise to grab a set of brackets now?

[Todd TCE]

Effects all the kits guys. The only difference on the Corvette caliper is the hose and and banjo bolt thread.

*Thanks for the purchase. Note they won't ship until mid next week back from getting plated. (I have hoses just not brackets)

[Turbov6Bryan]

Effects all the kits guys. The only difference on the Corvette caliper is the hose and and banjo bolt thread.

*Thanks for the purchase. Note they won't ship until mid next week back from getting plated. (I have hoses just not brackets)


I'm in no rush for them, brake job is due on one car.... But I'm broke so i need to sell some stuff to afford the rest

[slickster]

a mm should not be driven until you put these lines on!!!

[tobiasg1995]

^^^^^^ what he said, best upgrade I've done. Wish I would've done it first.

2006 GMQ, 2010 CVPI

[WPG_Merc]

a mm should not be driven until you put these lines on!!!

:agree:
I had the lines put on my MM last April. :thanks: Todd TCE & Mo's Speed Shop for the install. :2thumbs:

[Todd TCE]

I can ship out the front Zack kit tomorrow.

[Gryphonzus]

Just put in my order for the big brake kit WOOOHOOO! Now if Jerry would hurry up and take some more money from me for his fancy brakes I will be ready to go faster.:help:

[Zack]

Bought me a set

[2,4shofast]

Looks like I better get a spare set as well!

[lji372]

bought a set for blue!!!!!!!! :woohoo:

now if i could get this guy to do some calipers!! :mad2: :mad2: :mad2:

[fastblackmerc]

bought a set for blue!!!!!!!! :woohoo:

now if i could get this guy to do some calipers!! :mad2: :mad2: :mad2:

Is it someone you know?!?!?!?!? :D

[Turbov6Bryan]

bought a set for blue!!!!!!!! :woohoo:

now if i could get this guy to do some calipers!! :mad2: :mad2: :mad2:

Wonder if that guy is gonna put a price on engraving those calipers????

[RubberCtyRauder]

Wonder if that guy is gonna put a price on engraving those calipers????


$8..................per letter:D

[ChiTownMaraud3r]

Put me down for a front only set. Thanks.

[F1erceK]

I bought the kit on your website thanks for the update. wasnt sure what to buy so got the default listed. LMK if that was incorrect

[Todd TCE]

The "default" would be for a 4 line, standard caliper car.

*That's what I see for you on the payment now.

[loud2004marquis]

If one were to buy just the line kit now, would it make it cheaper in buying the 13" kit for both front and rear later down the road due to already having the SS lines installed? Or do you supply different SS lines in the kit?

[Todd TCE]

The OE replacement hose kits are not compatible with any of the full BBK listings.

(nearly) All Wilwood calipers are 1/8NPT inlets for AN3 fittings.

[BAD MERC]

I love, love, LOVE my TCE lines but may need to replace the right rear one. While the wheels were off I discovered chafing through the clear hose into the braid. I guess it touches the rim so I tied it back. I think the small drop in the rear may have caused it to flex outward.

[Todd TCE]

I love, love, LOVE my TCE lines but may need to replace the right rear one. While the wheels were off I discovered chafing through the clear hose into the braid. I guess it touches the rim so I tied it back. I think the small drop in the rear may have caused it to flex outward.

One easy way to prevent such issues is if you feel there's a clearance issue and need more "form" to the hose simply tighten the chassis fitting last and do so with a bit of a twist in the hose. In this case it will retain the shape when the flare nut is tight.

[MOTOWN]

One easy way to prevent such issues is if you feel there's a clearance issue and need more "form" to the hose simply tighten the chassis fitting last and do so with a bit of a twist in the hose. In this case it will retain the shape when the flare nut is tight.

Exactly what I did on my install.

[crownvic97]

Just ordered Zack fronts with the rears!

Now I just need the new brake parts!

[vkirkend]

I only want to do the Zack brakes on the front. Do I need the (4) lines?
OOPS, found the (2) Front Brake Line kit after all. Ordered.....

[Henry]

I ordered yesterday afternoon and just got a tracking number. Very fast shipping

[Todd TCE]

There were a couple four line, standard kits, on the hook. As well as one Zack front when I started the thread. Not much left now until I get the plating back.

[Gryphonzus]

Did you ship mine? Have not heard anything yet.

[Todd TCE]

Most kits have not yet shipped pending the plating I noted earlier.

Hope to have the brackets here day or two.

Ten orders hanging on the wall right now.

[daddyusmaximus]

About this being the last run of hose kits or brackets you will have for a while... There are so many brake threads on here that I'm a bit confused. What I would like to do for my car is the Corvette front brake upgrade, (with the braided stainless lines) and the stainless braided lines for the rear. Is this the brackets and hoses I will need for this mod? If so, I would like to order. I'm waiting on the first of the month for my VA disability check, so If there could be a set available then (and these are what I need) that would be perfect.


Thanks,
Al


Tried to PM, but it looks like it's not going through.

[Todd TCE]

A few kits shipped yesterday and more should leave today with the arrival of some more front hoses.


As for the last run, I covered that in the first post:

Won't say we won't ever make more but once they are gone it could be a pre order qty basis next run. Having an inventory of hoses, fittings and brackets on the wall..packaged and such is nice but it's cash money doing nothing but collecting dust.

Ie. we'll open the door to prepaid orders and leave the door open until we get 20 sales and do production and ship them. Could be a week, a month, six months....making 20 kits has the profits all in the last 4-5 of them. I don't want to sit on that money any longer with slow sales.

[lji372]

A few kits shipped yesterday and more should leave today with the arrival of some more front hoses.


As for the last run, I covered that in the first post:

Won't say we won't ever make more but once they are gone it could be a pre order qty basis next run. Having an inventory of hoses, fittings and brackets on the wall..packaged and such is nice but it's cash money doing nothing but collecting dust.

Ie. we'll open the door to prepaid orders and leave the door open until we get 20 sales and do production and ship them. Could be a week, a month, six months....making 20 kits has the profits all in the last 4-5 of them. I don't want to sit on that money any longer with slow sales.

fyi i am doing another brake bracket run although the last run sat around for quite awhile.

[RubberCtyRauder]

About this being the last run of hose kits or brackets you will have for a while... There are so many brake threads on here that I'm a bit confused. What I would like to do for my car is the Corvette front brake upgrade, (with the braided stainless lines) and the stainless braided lines for the rear. Is this the brackets and hoses I will need for this mod? If so, I would like to order. I'm waiting on the first of the month for my VA disability check, so If there could be a set available then (and these are what I need) that would be perfect.


Thanks,
Al


Tried to PM, but it looks like it's not going through.

You will need Zack front brake line kit from TCE for the Zack/jerry big brake kit (corvette caliper)
and you will need a Marauder rear kit as that's the only rear kit TCE makes

TCE waiting on plating to return, so I think you are good to order first of month (tomorrow)

[Todd TCE]

fyi i am doing another brake bracket run although the last run sat around for quite awhile.


That's good to hear. I may have a few hose kits left for the start of that and if sales perk up on your end we should have no problem coordinating the sale of 20 kits in short order.

[ledzilla]

I just put my order in. Totally looking forward to getting this brake upgrade complete. Especially since I don't trust the Chinese hose in the rear I bought as an emergency replacement.

[Todd TCE]

TECHNICAL UPDATE

If you receive four hoses with "Zack" front and standard rears you have two different banjo bolt. The standard are for the rear, the metric are for the front.

The metric bolts are identified by the hash mark in the hex head. Exmaple

http://www.tceperformanceproducts.com/images/IMG_20160701_160048604.jpg


***** Customer Pryor: shipping one of two sets today. The other will follow shortly. ****

[ledzilla]

Just got mine. It's a good looking kit.

[Revue]

Would like a set of these hoses for my '08 P71. How long can I expect to wait, if you are indeed out at the moment. Thanks!

[Todd TCE]

Would like a set of these hoses for my '08 P71. How long can I expect to wait, if you are indeed out at the moment. Thanks!


Parts in stock for all the kits at this time.


http://www.tceperformanceproducts.com/marauder/kits-17/

[Revue]

Parts in stock for all the kits at this time.


http://www.tceperformanceproducts.com/marauder/kits-17/

Have you confirmed fitment on other Panthers, specifically the P71? Everywhere I've looked lists the same part number for Marauders and Vics. So one can only assume. Just wondering if you or any customers have confirmed.

[ChiTownMaraud3r]

Parts in stock for all the kits at this time.


http://www.tceperformanceproducts.com/marauder/kits-17/

Todd I received the front only kit about a month ago. Seeing as how the status of the zack big brake kit brackets and calipers are unknown... Do you know if these lines work with an Aero 6 caliper set?

[Todd TCE]

Do you know if these lines work with an Aero 6 caliper set?

No sir...sorry

[lji372]

Todd I received the front only kit about a month ago. Seeing as how the status of the zack big brake kit brackets and calipers are unknown... Do you know if these lines work with an Aero 6 caliper set?

It is known.

Big brake brackets are being ran this weekend.
ill start a thread on calipers next week.

[Todd TCE]

I'll take a look at bracket inventory tomorrow.

[ChiTownMaraud3r]

It is known.

Big brake brackets are being ran this weekend.
ill start a thread on calipers next week.

Woohoo :beer: Thanks

And thanks Todd.

[Bad_S55]

Figured it was a good idea to order a full set with Zack fronts to save for the next car just in case these don't get run for a while!

[SGT_MERC]

Todd, How many sets of the front Zack kit hoses are left? I just called a few mins ago as well. I'm gonna need a set, Thanks
Marty

[Shornaday]

Todd,

I want to put the SS lines on standard brakes for a 2004 Marauder and want to make sure I am selecting the correct parts. Is the information below correct for stock brakes?

• SS Brake Hose Kit
Marauder SS hose kit: Complete 4 line kit w/banjos, brkts, washers

http://www.tceperformanceproducts.com/images/Marauder%20Hoses.jpg

Thanks

Steve

[Todd TCE]

Currently there are brackets for FIVE kits left.

*not incl Connor's order.

Right now I'm waiting on some rear hoses for stock. Should be a couple days out.

[Todd TCE]

I have a number of Open Orders at this time...I'm sorry but I'm waiting on some hoses to fill them yet. My supplier is in a computer change time and has messed up all his files etc is the word.

Should be back under control mid week.

[daddyusmaximus]

Figured it was a good idea to order a full set with Zack fronts to save for the next car just in case these don't get run for a while!

Your sig has me confused...


"Zack big brake kit with custom S55 calipers"


I was under the impression that you needed Corvette calipers for the big brake kit, or is yours a further modification? Are the AMG calipers much better or much harder to get to work?

[Paul]

Just ordered a std OE replacement set.

[Todd TCE]

Running low on brackets...I caved in and had another 20 sets made up.

Don't let me down! lol

[Bad_S55]

Your sig has me confused...


"Zack big brake kit with custom S55 calipers"


I was under the impression that you needed Corvette calipers for the big brake kit, or is yours a further modification? Are the AMG calipers much better or much harder to get to work?

No, I have Corvette calipers. This was just a side project at work where we faced off the Corvette logo and engraved S55 cuz, ya know, Mercury S55!

http://i577.photobucket.com/albums/ss216/bad_S55/Mobile%20Uploads/20160820_204300_zpsfl65yutr.jp g (http://s577.photobucket.com/user/bad_S55/media/Mobile%20Uploads/20160820_204300_zpsfl65yutr.jp g.html)

[cer0413]

just ordered the zack set.

[lji372]

just ordered the zack set.

sounds like commitment :D

[cer0413]

sent you an PM Todd

[tbone]

I ordered and received my set last month. :)

[justbob]

I've had a full set on my shelf now for over a year.


Sent from my iPhone using Tapatalk

[cer0413]

I've had a full set on my shelf now for over a year.


Sent from my iPhone using Tapatalk
.........

Sent from my SM-G930P using Tapatalk

[MunsterBro95]

Do you make a kit for OEM brakes? haven't upgraded, but drove my first marauder the other day and noticed the brakes are spongy and from what I hear, its normal. If you do make one for Stock calipers and all, just wanting to upgrade the lines. whats the price

[RubberCtyRauder]

The kit works for OEM brakes..price is on the website for TCE

[Todd TCE]

Thanks and yes that is correct.

LINKY (http://www.tceperformanceproducts.com/marauder/kits-17/)

[MunsterBro95]

And all the parts are there? Anything else I need to buy?

[Todd TCE]

All that's missing is brake fluid and labor.


And if it's going to Germany you can't use the shopping cart as it's US delivery that way only.

[MunsterBro95]

I have an APO, which is like a us address

[MunsterBro95]

So this makes a huge difference in the effect of the brakes?

[MunsterBro95]

So is it easiest to PayPal you the money and just have you mail it? And any idea how much longer you will make these.

[fastblackmerc]

So this makes a huge difference in the effect of the brakes?

Short of upgrading the rotors, calipers and pads, YES!

No more squishy pedal.

[lji372]

Short of upgrading the rotors, calipers and pads, YES!

No more squishy pedal.

And there is a fairly cheap option for that too

Rock auto
$105 18-B4703 caliper
$105 18-B4702 caliper
Tce
$85 front braided lines
Me
$165 adapter brackets
eBay
$138 hart gt500 rotors
Amazon
$38 Wagner pads mx731

$636 total