Driver seat help

[stryker]

Greetings Marauderers. I need to know how to remove the rear plastic panel on the driver seat of my CVLX Panther I think i'm having some problem with the lumbar plus an annoying noise that came from the interior of the seat back part, I include a picture for reference, thanks to read.
https://uploads.tapatalk-cdn.com/20170731/229419621f4b29e9232a67ef1052cd 92.jpg


Enviado desde mi iPhone utilizando Tapatalk

[fastblackmerc]

See below............

[Spectragod]

There are 2, screws with 5.5mm heads on them, on the bottom, 1 on each side, almost pointing straight up, remove those, then the panel will be removed by pulling it straight down.

[Marauderjack]

And those little screws are a PITA!!!:argue:

[Spectragod]

And those little screws are a PITA!!!:argue:



Not with the seat out of the car, or, a flex head ratchet


Sent from my iThrone using Tapatalk

[Marauderjack]

Seat in car is a PITA for me even with a flex ratchet......I'm OLD and not very flexible anymore but I did get it done with lotsa new words!!:argue::argue:

[Spectragod]

Seat in car is a PITA for me even with a flex ratchet......I'm OLD and not very flexible anymore but I did get it done with lotsa new words!!:argue::argue:



I'm old too, the tip of the day..... remove the rear seat bottom cushion, it will give you a lot more room to maneuver......twss


Sent from my iThrone using Tapatalk

[sjmarauder408]

It's two bolt right under the back seat I just did it to mine


Sent from my iPhone using Tapatalk

[loud2004marquis]

http://db3.memegenerator.net/cache/instances/folder573/500x/80112573/the-count-two-screws-ah-ah-ah.jpg

[stryker]

loud2004marquis. The picture you post do no open try again


Enviado desde mi iPhone utilizando Tapatalk