PDA

View Full Version : For Sale Art Carr Torque Converter + 8 bolt SFI Flexplate


Joe Walsh
11-20-2017, 06:24 PM
Selling my Art Carr 9.5" Heavy Duty Lock-up Torque Converter.
Includes 8 bolt* Performance Automatic SFI Flexplate.

I ran this combo and could pull 1.795 60 foot times (N/A with OEM 3.55 gears.)

Cost me $850.00+ for both pieces.

$500.00 OBO shipped in the continental US.

https://i.imgur.com/IiUO81al.jpg

https://i.imgur.com/i0IzGczl.jpg

https://i.imgur.com/bNVYHJHl.jpg


https://i.imgur.com/DtYup0Ql.jpg

https://i.imgur.com/prWQn14l.jpg

* NOTE: 8 bolt flexplate will NOT fit OEM 6 bolt cast crank.

https://i.imgur.com/l9lYaXPl.jpg

https://i.imgur.com/EjWABOjl.jpg
Spectragod
11-20-2017, 07:54 PM
What stall?

How many discs?

How many miles on the converter?


Sent from my iPhone using Tapatalk
Joe Walsh
11-20-2017, 09:12 PM
What stall?

2,800 - 3,000 rpm...but it depends on your engine's HP

How many discs?

Single Disc

How many miles on the converter?

Approximately 8,000 miles.



...................
Joe Walsh
11-25-2017, 09:55 AM
Holiday BUMP!

:bump:
Mr. Man
11-25-2017, 11:53 AM
Holiday BUMP!

:bump:You wish. :P :D
Joe Walsh
12-06-2017, 07:02 PM
:bump:

Price reduced.
Joe Walsh
12-08-2017, 12:49 PM
I've had several inquiries regarding this High Stall converter.
I'm trying to verify the OEM flexplate/torque converter's bolt pattern.
Does anyone know, or does anyone have an OEM converter for the measurements?
chefcaleb
12-08-2017, 01:08 PM
I've had several inquiries regarding this High Stall converter.
I'm trying to verify the OEM flexplate/torque converter's bolt pattern.
Does anyone know, or does anyone have an OEM converter for the measurements?



My builder is pretty certain he can make it work. Could I purchase a different flexplate and make this TC work with the OEM one? Or will this only work with an 8 bolt pattern?
Joe Walsh
12-08-2017, 01:36 PM
The '8 bolt' only refers to attaching the flexplate to the forged Cobra 8 bolt crank.
Check my pictures above and the center of the blue SFI flexplate has 8 bolt holes where it bolts to the crank.
My concern is the 4 bolt pattern that the smaller 9.5" Art Carr converter has vs 11.25" OEM converter when bolting it to the flexplate.
You can see the 4 bolt pattern near the outer edge of the flexplate.
I put red paint on the Art Carr's 4 mounting bolts.