Type 100 Heat Exchanger

[NATEHAWK]

Finally got one, just trying to see a few options to mount it. Any one mind sharing some pics or ideas. Thanks in advance.


Sent from my iPhone using Tapatalk

[musclemerc]

I admit I over engineered my heat exchanger mounts, but its held up well over the years.

https://www.thechicagogarage.com/forum/marauder-tech/129244-hybrid-trilogy-install.html

[guspech750]

Here’s how I mounted mine and Mikes.

https://uploads.tapatalk-cdn.com/20181008/9d41adebc57591dd2e8ea501bd6324 e0.jpg
https://uploads.tapatalk-cdn.com/20181008/7efac0622c570ce523df4bc943413d 02.jpg

Bottom side
https://uploads.tapatalk-cdn.com/20181008/57efddd5daf07da2247b7719430995 69.jpg

Top side again.
https://uploads.tapatalk-cdn.com/20181008/cabd5b9dc2efdbe1e17cf11e953a11 59.jpg


Sent from the White House on the tax payers dime.

[NATEHAWK]

Thanks guys, going to hit home depot to see if I can find some brackets that are easy enough to bend/pursuade with a BIG hammer to bend as I see fit.


Sent from my iPhone using Tapatalk

[blazen71]

Aluminum flat stock from any hardware store is what you want to build those brackets!

[guspech750]

Thanks guys, going to hit home depot to see if I can find some brackets that are easy enough to bend/pursuade with a BIG hammer to bend as I see fit.


Sent from my iPhone using Tapatalk



I also used my map gas torch to heat up the aluminum so it bends easier. Makes nice bends that way.
https://uploads.tapatalk-cdn.com/20181012/29d3683579deb8c87e50c16a7c439c 37.png


Sent from the White House on the tax payers dime.

[NATEHAWK]

Looks solid. Send a pair my way and I'll send a PayPal payment to you immediately [emoji16]. Saw these on Amazon. But yours look sturdy.

https://uploads.tapatalk-cdn.com/20181012/16446d4cee2231cb609e4083b1968e 94.png


Sent from my iPhone using Tapatalk

[Mr. Man]

That metal^^^^ looks a wee bit thin Nate. You want to make sure that cooler is mounted firmly. I 'd go with something like what Joe used.

[stevengerard]

Here’s how I mounted mine and Mikes.

[IMG]https://uploads.tapatalk-cdn.com/20181008

Sent from the White House on the tax payers dime.


Joe are the before or after pictures? Meaning recent? Hope all is well

[NATEHAWK]

That metal^^^^ looks a wee bit thin Nate. You want to make sure that cooler is mounted firmly. I 'd go with something like what Joe used.



Agreed. Trying to convince him to make me a set and send them down[emoji16]


Sent from my iPhone using Tapatalk

[Zack]

Agreed. Trying to convince him to make me a set and send them down[emoji16]


Sent from my iPhone using Tapatalk

You cant just 'make a set' It's super easy. Measuring tape, Vice, hammer, drill

[Zack]

The heat exchangers vary from one to the other. Tabs are not always welded in the exact same spots.

[blazen71]

It's super easy. Measuring tape, Vice, hammer, drill

Like Zack said. Give it a try. You'll figure it out.

[NATEHAWK]

You cant just 'make a set' It's super easy. Measuring tape, Vice, hammer, drill



You right. Just brought some flat aluminium lol. Man you know how sometimes you just don't feel like it [emoji23][emoji23][emoji23]
https://uploads.tapatalk-cdn.com/20181012/c4038937a3c367bb2fd7547e72a02b a1.jpg


Sent from my iPhone using Tapatalk

[Taemian]

Finally got one, just trying to see a few options to mount it. Any one mind sharing some pics or ideas. Thanks in advance.


Sent from my iPhone using Tapatalk

Do you have a link to where you bought it from? I looked on the LPF site but couldn't find it.

[Zack]

Do you have a link to where you bought it from? I looked on the LPF site but couldn't find it.

www.frozenboost.com

[Taemian]

www.frozenboost.com

Many thanks!:)