Wanted to buy: marauder EGR TUBE

[Chayton]

Hey all,

I stripped the nut that attaches the egr tube to the exhaust. I would like to buy a new one! Hoping someone has an extra

[Lowndex]

https://www.tascaparts.com/oem-parts/ford-egr-tube-3w7z9d477ba?origin=pla&gclid=EAIaIQobChMI3dqE2ZGR3gIV j9lkCh1qswUbEAQYAyABEgKoVfD_Bw E

https://www.ebay.com/b/EGR-Valves-Parts-for-Mercury-Marauder/33607/bn_1449954

https://www.rockauto.com/en/catalog/mercury,2004,marauder,4.6l+v8, 1428218,exhaust+&+emission,egr+line,12319

[Chayton]

https://www.tascaparts.com/oem-parts/ford-egr-tube-3w7z9d477ba?origin=pla&gclid=EAIaIQobChMI3dqE2ZGR3gIV j9lkCh1qswUbEAQYAyABEgKoVfD_Bw E

https://www.ebay.com/b/EGR-Valves-Parts-for-Mercury-Marauder/33607/bn_1449954

https://www.rockauto.com/en/catalog/mercury,2004,marauder,4.6l+v8, 1428218,exhaust+&+emission,egr+line,12319

im pretty sure those are 2 valve specific parts the tube I need is special and apparently no longer available

[Chayton]

Maybe I could cut the tube and put in a new nut then weld it together? I would just be worried about the tube being too short then

[Lowndex]

im pretty sure those are 2 valve specific parts the tube I need is special and apparently no longer available

Tasca states the part fits our 4V Marauders.

[justbob]

Maybe I could cut the tube and put in a new nut then weld it together? I would just be worried about the tube being too short then



Why would it be too short? Besides, that nut is something like 22MM fine thread flare. Not exactly a common nut.

Best off to walk the adapter out of the manifold and take it and the tube to a bench and start fixing the thread IMO.


Sent from my iPhone using Tapatalk Pro

[justbob]

Tasca states the part fits our 4V Marauders.



https://uploads.tapatalk-cdn.com/20181018/5660db8e24773e71605106ee22122f d3.png



Sent from my iPhone using Tapatalk Pro

[NXSBOB]

3W3Z-9D477-BA
https://parts.autonationfordwhitebearl ake.com/auto-parts/2003/mercury/marauder/base-trim/4-6l-v8-gas-engine/emission-system-cat/emission-components-scat

[Lowndex]

https://uploads.tapatalk-cdn.com/20181018/5660db8e24773e71605106ee22122f d3.png



Sent from my iPhone using Tapatalk Pro


https://imagizer.imageshack.com/v2/800x600q90/921/k613qx.jpg (https://imageshack.com/i/plk613qxj)

[Maraudermike1]

I've got one laying around since I just did an Eaton swap. let me know if you want it.

[justbob]

https://imagizer.imageshack.com/v2/800x600q90/921/k613qx.jpg (https://imageshack.com/i/plk613qxj)



They are wrong like most parts at Ford. Every parts view I’ve seen from Ford shows a SOHC. Scroll down and see the fine print I posted.

The number you need is the same suffix but the prefix for DOHC is 3W3Z.




Sent from my iPhone using Tapatalk Pro