HELP NEEDED:

[bigboi]

LOOKING FOR THE PART NUMBER FOR THE DRIVE BELT FOR MY MARAUDER IT HAS A TRILOGY SUPERCHARGER

[Edward Myers]

LOOKING FOR THE PART NUMBER FOR THE DRIVE BELT FOR MY MARAUDER IT HAS A TRILOGY SUPERCHARGER
This is directly from the trilogy kit manual

https://uploads.tapatalk-cdn.com/20200902/a49199a60ac06c0fd225824b4b17ce 44.jpg

Sent from my SM-G715U using Tapatalk

[gdmjoe]

bigboi ...
NO NEED TO SHOUT!!!

Hint:


http://www.gdmjoe.com/capslock.jpg


Looking for the installation instructions (which includes the complete parts list)? » MERCURY MARAUDER SUPERCHARGER SYSTEM INSTALLATION INSTRUCTIONS (https://www.gdmjoe.com/marauder/documents/Trilogy-MercuryMarauderSCManual.pdf)
.

[MyBlackBeasts]

This is directly from the trilogy kit manual

https://uploads.tapatalk-cdn.com/20200902/a49199a60ac06c0fd225824b4b17ce 44.jpg

Sent from my SM-G715U using Tapatalk

That's Trilogy's internal part number, not the actual belt part number.

I've got it somewhere, let me see if I can find it.

[Grimrepairman]

I did mine when I got the car, I'll see if I can find the invoice.
Have #s for the tensioners also.

[Grimrepairman]

Found stuff:
Gates #K080510 Goodyear #4080505
I'd go with the shorter option, I had to clock the tensioner in the bracket for it to apply tension without bottoming out.

For the accessory belt:
Napa #25-060994 a 25-061000 walked back on one of the idler pulleys and would occasionally just barely touch the timing cover making a very annoying intermittent squeak.
Napa 38189 and 38133 tensioners, don't remember which is which. Should cross reference almost anywhere.

[Comin' in Hot]

It’s either going to be a 98 inch belt or 100 inch belt, the early ones were 98, the alternator bracket was revised a few times and the later ones were 100 inch.

[Comin' in Hot]

Which drive belt? Accessory driver or S/C drive, Post above was for the accessory drive belt. The supercharger belt is going to be a 51” if using the trilogy supplied s/c pulleys.

[bigboi]

thanks for all the help

[MyBlackBeasts]

The Trilogy blower belt is Gates K080510. $24 from Amazon

[justbob]

Assuming you are referring to the blower belt.

Your pulley sizes will dictate the belt size. Without that info (unless it’s all original Trilogy) you are SOL..


Sent from my iPhone using Tapatalk Pro

[Mebot]

The Trilogy blower belt is Gates K080510. $24 from Amazon

sweet thanks. Just ordered one

[musclemerc]

sweet thanks. Just ordered one

I sent you a spare SC belt.

[MyBlackBeasts]

Assuming you are referring to the blower belt.

Your pulley sizes will dictate the belt size. Without that info (unless it’s all original Trilogy) you are SOL..


Yes, stock Trilogy belt. If not stock an owner should document their belt numbers when the get the car to prevent playing the "c rap! what belt do I need" game when they let go.

[Mebot]

I sent you a spare SC belt.

yup, but they were both for the same size for the smaller pulley. we went with the stock pulley so just a hair out

[Mebot]

btw Travis it's night and day difference! Love the boost!

[justbob]

Assuming you are referring to the blower belt.

Your pulley sizes will dictate the belt size. Without that info (unless it’s all original Trilogy) you are SOL..


Yes, stock Trilogy belt. If not stock an owner should document their belt numbers when the get the car to prevent playing the "c rap! what belt do I need" game when they let go.

More like keep a spare in the truck. My belts are a $100 a pop. Still cheaper than a tow and having to search/order one.


Sent from my iPhone using Tapatalk Pro

[MyBlackBeasts]

More like keep a spare in the truck. My belts are a $100 a pop. Still cheaper than a tow and having to search/order one.


Sent from my iPhone using Tapatalk Pro

Dayum, Bobby! :eek: I just paid $98 for belt on my "new" F250 but the thing is 2-sided and about 1000' long! Def keep spare in the boot! :D

[justbob]

Dayum, Bobby! :eek: I just paid $98 for belt on my "new" F250 but the thing is 2-sided and about 1000' long! Def keep spare in the boot! :D

I just double checked as it’s been a while. Scratch that. They are now $170-$233 for the gates version.. [emoji43]
Plus that’s the stock listing for 96-98 Cobra renegade bracket starter kit with cute pulleys. My pulleys are war sized so longer belt..!

I saw a used one for $100.


Sent from my iPhone using Tapatalk Pro

[musclemerc]

yup, but they were both for the same size for the smaller pulley. we went with the stock pulley so just a hair out


btw Travis it's night and day difference! Love the boost!

I'm glad you finally got it done! I would love to see a pic when you get a chance.

[Mebot]

I'm glad you finally got it done! I would love to see a pic when you get a chance.Yep. Here you go! Gratuitous shot of Mt. Rainier after install and was able to cruise with some friends. https://uploads.tapatalk-cdn.com/20201103/b0a36095812fcbca79413fd96ffbf7 d9.jpghttps://uploads.tapatalk-cdn.com/20201103/ce2e37e2a9989bcb5ca38f68d41839 c5.jpg

[musclemerc]

^^^Man that looks good!

[Guittard22]

Yep. Here you go! Gratuitous shot of Mt. Rainier after install and was able to cruise with some friends. https://uploads.tapatalk-cdn.com/20201103/b0a36095812fcbca79413fd96ffbf7 d9.jpghttps://uploads.tapatalk-cdn.com/20201103/ce2e37e2a9989bcb5ca38f68d41839 c5.jpgLooks like that Punisher logo has faded a little. Looking good brother man!

Sent from my SM-N960U using Tapatalk

[Mebot]

Looks like that Punisher logo has faded a little. Looking good brother man!

Sent from my SM-N960U using Tapatalk

Yeah my badge has definitely seen a lot of hardship. I wish DANIEL at Colex was still around. I would see if I could send my emblem back for refurbishment.

[Guittard22]

Yeah my badge has definitely seen a lot of hardship. I wish DANIEL at Colex was still around. I would see if I could send my emblem back for refurbishment.If I can find a the one you sent me I send it back! Stay tuned

Sent from my SM-N960U using Tapatalk

[Mr. Man]

Yeah my badge has definitely seen a lot of hardship. I wish DANIEL at Colex was still around. I would see if I could send my emblem back for refurbishment.Been trying to talk Jerry into making them for a few years. He might come around. Glad he is doing some cap covers now. They look great. He does primo work.