PDA

View Full Version : Can someone help me please?


WMITCHELL4
08-07-2002, 09:07 AM
I want to lower my 03 MM rear air susp. I read some where about a sensor???
Fourth Horseman
08-07-2002, 09:49 AM
Might make more sense to change the rear tires to the same size as the fronts. I'm assuming you're trying to get rid of the raked look?
MarauderMike
08-07-2002, 01:10 PM
If you look at your axle there are two arms that run from the axle carrier to the frame, one to each side. The height adjustment arm is located on the drivers side arm. The height adjustment arm runs up to the height sensor. The height adjustment arm should be adjustable.
GarageMahal
08-07-2002, 03:08 PM
Hmm, interesting info... I wonder how it would look if I raised the rear end up a little.

Hope I don't break something,
jta
Dennis Reinhart
08-07-2002, 07:35 PM
Originally posted by Fourth Horseman
Might make more sense to change the rear tires to the same size as the fronts. I'm assuming you're trying to get rid of the raked look?

DO NOT CHANGE TIRES

it will throw the speedo off, on a Mark 8 you can modify the sensor and it will lower the car I will look into this for you
Fourth Horseman
08-07-2002, 08:18 PM
You can correct that with your chip programming, though, can you not?

I just know some guys have been unhappy with the bigger tires in back.
Dennis Reinhart
08-08-2002, 04:26 AM
Originally posted by Fourth Horseman
You can correct that with your chip programming, though, can you not?

I just know some guys have been unhappy with the bigger tires in back.


Yes I can