Recommended Prefilter?

[BruteForce]

Hi Jay,

I've been looking around the 'net for a water resistant prefilter (ala Outerwears or KN PreCharger) to fit my JLT intake assembly. Do you have the specific part number for the S&B filter in your kit? It seems that all the sites need a filter part number to determine which prefilter fits. That being said, is there a specific product you might recommend?

[Tucker]

Outerwearz is a good company.
S&B part # is R40-09AAFPS
Measurments are
Filter top width 5 1/4 "
Filter height 9" not including the mounting flange.

If you get one, get me a part #.
Thanks
Jay

[BruteForce]

Thanks Jay. I ordered a water resistant Red prefilter over the phone with Outerwears. I'll report back once it arrives. BTW, when ordering, the S&B part number isn't helpful. They just need the dimensions. I noted that the S&B catalog doesn't list the filter base width (widest point before the mounting flange) and I wasn't about to unscrew it just to measure so I eyeballed it at 7.5". If that turns out to be too big, I'll have to try again.

[Tucker]

How much was it?

[BruteForce]

$21.55 + shipping

I was thinking that you might contact them and find out what it would cost to run a batch with your logo on them. I'd much rather have yours than theirs. :D

[Gent4157]

Sounds good to me, I would order one in a heartbeat!!!!!!

I was thinking that you might contact them and find out what it would cost to run a batch with your logo on them. I'd much rather have yours than theirs. :D[/QUOTE]

[Tucker]

I called and they are supposed to fax me dealer info on Monday.

I need to buy 30 in the first order. If the price is right I can do it.
I'll let you all know.
Thanks
Jay

[BruteForce]

Make sure the logo goes length-wise so it can peek out from under my heat sheild. :D

[CRUZTAKER]

Thanks Jay. I ordered a water resistant Red prefilter over the phone with Outerwears.......
I believe this is the one that came with my PHP intake kit. It's nice, and well worth the money.

I take it off when I race...another cheat of mine....:rolleyes:

[GA-Marauder]

I called and they are supposed to fax me dealer info on Monday.

I need to buy 30 in the first order. If the price is right I can do it.
I'll let you all know.
Thanks
Jay
Hi, Jay... I'm in for one if you order them. I'm very happy with my JLT kit, and would like to add to it!:D

[fastblackmerc]

Hi, Jay... I'm in for one if you order them. I'm very happy with my JLT kit, and would like to add to it!:D

Very happy with mine also.... I'll take one too....

[Tucker]

I got more info this week and hope to get a packet in the mail soon. I will be ordering them as soon as I find out price and availablity.

Thanks guys.
Jay

[Svashtar]

Dumb question: Is the JLT kit NOT meant to be used year-round? Should it be replaced with the stock airbox in rainy weather? I'm wondering now wet it would get in the engine compartment.

But this prefilter cover sounds like it is meant to allow the filter to be used year round. (?)

Thanks for clarifying. I just assumed the unit as is was safe to use all the time.

Regards,

Norm

[BruteForce]

Dumb question: Is the JLT kit NOT meant to be used year-round? Should it be replaced with the stock airbox in rainy weather? I'm wondering now wet it would get in the engine compartment.

But this prefilter cover sounds like it is meant to allow the filter to be used year round. (?)

Thanks for clarifying. I just assumed the unit as is was safe to use all the time.

Regards,

Norm

Its safe to use year-round. I just wanted a cover 'cause they're kewl. :D

[Tucker]

You will not get enough water that high to cause a problem.:D

[BruteForce]

Outerwears prefilter arrived today. Part number listed on the tag is 20-1553-03. Don't know if you can order one using that or not. Its the "water repellent" version and it fits perfectly. Here are some install pics. Note the "eBay" heat sheild.
http://www.mercurygallery.net/mmnet/data/500/1713prefilterCloseUp2.jpg
http://www.mercurygallery.net/mmnet/data/500/1713prefilterCloseUp.jpg
http://www.mercurygallery.net/mmnet/data/500/1713heatSheildCloseUp.jpg

[hdwrench]

looks good might have to find one o those ebay heat sheilds for myself...:confused:

[Tucker]

That's great. I hope to have a order in soon. I will try that part #.
Jay

[fastblackmerc]

Outerwears prefilter arrived today. Part number listed on the tag is 20-1553-03. Don't know if you can order one using that or not. Its the "water repellent" version and it fits perfectly. Here are some install pics. Note the "eBay" heat sheild.
http://www.mercurygallery.net/mmnet/data/500/1713prefilterCloseUp2.jpg
http://www.mercurygallery.net/mmnet/data/500/1713prefilterCloseUp.jpg
http://www.mercurygallery.net/mmnet/data/500/1713heatSheildCloseUp.jpg

I got the same heat shield on eBay. Put JLT's sticker on the top edge, looks like it's engraved.

[Svashtar]

I got the same heat shield on eBay. Put JLT's sticker on the top edge, looks like it's engraved.
Can you give me a link to this heat shield? What is it made of? I figured at first you were talking about a single auctioned item, but if you both have one I'd like to get in on it as well.

Thanks!

Norm

[hdwrench]

im interested in both the shield and the prefilter... links? :)

[BruteForce]

im interested in both the shield and the prefilter... links? :)

Just did a search on ebay and it doesn't appear they have any running right now. Here's the one I bought: link (http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=7942912094)

The prefilter is from Outerwears Racing Accessories 1-800-967-3450. The part number for the one I had made is in a prevoius post in this thread. You'll need to call to order.

[fastblackmerc]

Just did a search on ebay and it doesn't appear they have any running right now. Here's the one I bought: link (http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=7942912094)

The prefilter is from Outerwears Racing Accessories 1-800-967-3450. The part number for the one I had made is in a prevoius post in this thread. You'll need to call to order.

Yep, that's the one I got. It's the biggest (length) I found. Polished stainless steel.

[hdwrench]

I called and they are supposed to fax me dealer info on Monday.

I need to buy 30 in the first order. If the price is right I can do it.
I'll let you all know.
Thanks
Jay
any more info on getting these?

[Tucker]

I spoke with them today. They need to get back with me on pricing.

The logo in big bucks. I'm not doing that.

As soon as I order I will let you all know.
Thanks
Jay

[hdwrench]

I spoke with them today. They need to get back with me on pricing.

The logo in big bucks. I'm not doing that.

As soon as I order I will let you all know.
Thanks
Jay
sounds good :) i found the shield on ebay thx for the links guys

[hdwrench]

i got my ebay heat shield today... havent installed it yet. looks pretty good and the price was right.

[hitchhiker]

Just did a search on ebay and it doesn't appear they have any running right now. Here's the one I bought: link (http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=7942912094)

The prefilter is from Outerwears Racing Accessories 1-800-967-3450. The part number for the one I had made is in a prevoius post in this thread. You'll need to call to order.
I just ordered one.

Regards,

David

[hitchhiker]

Outerwears prefilter arrived today. Part number listed on the tag is 20-1553-03. Don't know if you can order one using that or not. Its the "water repellent" version and it fits perfectly. Here are some install pics. Note the "eBay" heat sheild.
http://www.mercurygallery.net/mmnet/data/500/1713prefilterCloseUp2.jpg
http://www.mercurygallery.net/mmnet/data/500/1713prefilterCloseUp.jpg
http://www.mercurygallery.net/mmnet/data/500/1713heatSheildCloseUp.jpg
Did you paint your 'ebay' heat shield?

Thanks,

David

[BruteForce]

Did you paint your 'ebay' heat shield?

Thanks,

David

Nope. Just the lighting in my garage. Its still shiny stainless.

[Marauder386]

Vhaat da heck izzz dah Plasma Booster box I see there ? Is your MM donating plasma for future mods ??

:cool:

[BruteForce]

Vhaat da heck izzz dah Plasma Booster box I see there ? Is your MM donating plasma for future mods ??

:cool:

Izz a ignichin koil ampli'fire. Reed all 'bout it (Eubonics optional)

da link (http://www.ignitionsolutions.com/productsBooster.asp)

[Bradley G]

Can anyone confirm the claim of gains for the Plasma mod,This one does not appear to be as popular(on the board) as other mods.I know the claims are small, and 10 horse/torque gain may not be felt SOP.I though I read that this is not necessarily true.Anyone substantiat the claim?

Bradley G

[Gent4157]

Any news on the pre-filter? I would like to order one.

[Tucker]

Any news on the pre-filter? I would like to order one.I will know soon. There not giving a set pricing, so I need to get that straight tomorrow. I will be ordering 1 of each to make sure I like the fit then I will place the order for many.
Thanks
Jay

[CRUZTAKER]

...... looks like it's engraved.Engraved....?

You don't say?;)

<TABLE cellSpacing=1 cellPadding=2 width="100%" border=0><TBODY><TR><TD class=tddetails vAlign=top align=left>http://www.mercurygallery.net/mmnet/data/503/627Air_Box_002_Large_-med.jpg


This is a piece of polished stainless steel, engraved by 'Things Remembered'.

Please, feel free to make your own. :up:
</TD></TR></TBODY></TABLE>

[seans]

Is there a part number for the EBAY heat shield? I would like to get one too.