View Full Version : Marauder OEM Wheels..on A 1985 LTD CV
NATEHAWK
02-19-2005, 09:24 PM
My question is this i want to put a pair of the marauder oem wheels on a 85 crown victoria... I know the lub and thread sizes are the same but will the fit over the front rotor center hub where the wheel bearings are? If anyone can give me a lil help on this your help would be greatly appreciated.. I have the wheels on they way just hope they will fit.....
MENINBLK
02-19-2005, 09:43 PM
My question is this i want to put a pair of the marauder oem wheels on a 85 crown victoria... I know the lub and thread sizes are the same but will the fit over the front rotor center hub where the wheel bearings are? If anyone can give me a lil help on this your help would be greatly appreciated.. I have the wheels on they way just hope they will fit.....
The offset on a Marauder wheel is too far out for the 85 Crown Vic.
You would need an adapter ring to mount the Marauder Wheels,
and you may even have to roll the fenders for the wheel/tire to clear.
The Marauder wheels are made to fit a HUB Type suspension,
not the older Spindle Type suspension.
gdmjoe
02-20-2005, 10:25 AM
MENINBLK - The offset on a Marauder wheel is too far out for the 85 Crown Vic.
You would need an adapter ring to mount the Marauder Wheels,
and you may even have to roll the fenders for the wheel/tire to clear.
The Marauder wheels are made to fit a HUB Type suspension,
not the older Spindle Type suspension.
The offset and hub type issue can be overcome with appropriately sized hub-concentric wheel adapters (a.k.a. spacers) like (say) these .....
http://www.maximummotorsports.com/images/HnRSpacer.jpg
*They are H&R, however, Eibach also offers them (and they appear to be made by H&R).
**A reference link (http://www.maximummotorsports.com/spacers.asp)
NATEHAWK
Got your Email; am replying here.
BTW ...
- The diameter of the hub hole for the Marauder rim is 2¾" at the back-side.
- The backspacing for the Marauder rim is 6½".
MarauderMark
02-20-2005, 10:53 AM
My question is this i want to put a pair of the marauder oem wheels on a 85 crown victoria... I know the lub and thread sizes are the same but will the fit over the front rotor center hub where the wheel bearings are? If anyone can give me a lil help on this your help would be greatly appreciated.. I have the wheels on they way just hope they will fit.....
If you do get em on please post some pics.Inquiring minds wanna see..:up:
NATEHAWK
02-24-2005, 02:13 PM
Adapters on the way i need a 1.25 in adapter/spacer... Soon as i get them on i will post a few pics.. Thanks for all your help guys...I also ordered the gods head valve caps..Marauder Vic coming soon lol..
fast Ed
02-24-2005, 08:47 PM
The offset and hub type issue can be overcome with appropriately sized hub-concentric wheel adapters (a.k.a. spacers)
That's what I'm using to put the MM full-size spare wheels on my 68 Cougar, the ones sold by Eibach. Looks like 35 mm in the front, and 45 mm in the rear, are going to work out nicely. :)
cheers
Ed N.
MarkVI351
02-24-2005, 08:54 PM
i wonder how they would look on a 82 mark vi??? hmmmm...
NATEHAWK
02-26-2005, 05:00 AM
Okay guys the spacers are here i went up to the specialt shop in my area and got mine.. I just tried one in the parking lot to make sure it would fit... Here are a few pics to give you a lil sneak peak of my monster.. Bare with me al i had last night was my camera phone and these things are not that good in the dark and the real new look will be done by april so more pics then but for now i present.....Marauder Vic......
LNYTUNS
02-26-2005, 06:31 AM
Okay guys the spacers are here i went up to the specialt shop in my area and got mine.. I just tried one in the parking lot to make sure it would fit... Here are a few pics to give you a lil sneak peak of my monster.. Bare with me al i had last night was my camera phone and these things are not that good in the dark and the real new look will be done by april so more pics then but for now i present.....Marauder Vic......
Oh that looks cool!! That is going to have to be the next mod for my 88 Grand Merc I am working on. Same spacers for front and rear?
LNYTUNS
RoyLPita
02-26-2005, 06:53 AM
Adapters on the way i need a 1.25 in adapter/spacer... Soon as i get them on i will post a few pics.. Thanks for all your help guys...I also ordered the gods head valve caps..Marauder Vic coming soon lol..
I guess I would need that size to put '03 CVPI steelies or Bullitt wheels on my CVPI.
NATEHAWK
02-26-2005, 08:39 AM
Oh that looks cool!! That is going to have to be the next mod for my 88 Grand Merc I am working on. Same spacers for front and rear?
LNYTUNS
Yeap same spacers for front and rear 1.25 5 lug 4.5. I also gave them a good wash and waxing i used eagle 1 wax as you dry spray on wax worked damn good
gdmjoe
02-26-2005, 09:54 AM
NATEHAWK
http://bellsouthpwp.net/g/d/gdmjoe/Thumb.gif
Now take some decent pic's to do it justice.
BTW ... You are not limited to the godshead center caps; the ones for the Crown Victoria LX Sport as well as the Ford Racing Performance Parts and Roush offerings are a direct-fit.
Details (http://www.crownvic.net/ubbthreads/showflat.php?Cat=&Board=UBB2&Number=649059) <<<<< -click-
NATEHAWK
02-26-2005, 03:30 PM
http://bellsouthpwp.net/g/d/gdmjoe/Thumb.gif
Now take some decent pic's to do it justice.
BTW ... You are not limited to the godshead center caps; the ones for the Crown Victoria LX Sport as well as the Ford Racing Performance Parts and Roush offerings are a direct-fit.
Details (http://www.crownvic.net/ubbthreads/showflat.php?Cat=&Board=UBB2&Number=649059) <<<<< -click-
Thanks for the update i looked at those other before and thought they would fit..
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.