Gods Head Emblems!!

[Donny Carlson]

Okay, I can see there's a lot of pent up demand for these. I want them as well. Based on the proven high quality of the S-55 emblems (see other thread for pics), I am confident that Car Motorsports will deliver Gods Heads badges that will bowl us over.

Here's the catch. CM is not going to produce the GH emblems if they think that there's no market for them. Simple economics - they don't want to shell out the investment and get stuck with a lot of emblems that don't sell.

I think they will sell, and that this will be their most popular Marauder item.

So, here's what I recommend. Send and email to Car Motorsports and tell them you want to buy the GH emblems when they are ready. Tell them how many you want, too, so they can gauge how many people are interested in.

I wouldn't be opposed to doing something like with the Mac and Marty fender badges, where a minimum number needed to be reached before the order was submitted, but then, I don't run their company. I do think that a good show of interest will encourage them to send them to production and release them for sale.

Email Rich or Alan at car@carmotorsports.com

[Lowell]

Wive a goodie.

[Lowell]

Email could not find host.

[Donny Carlson]

Email could not find host.Hmm, let me check it. I have a secondary email, but this is the one listed on their business card and web site.

Edit: Email sent from both the link on their web site and from the link above, and has not bounced back. Stay tuned.

[DEFYANT]

I will email them tonight! I wonder if the can do a GH w/ a frontal view... The full face.... with a >:-{ look would be kewl..

EDIT: Email sent :D

[rocknrod]

From their website:
The best way to contact us is by sending us an email at CAR@carmotorsports.com (car@carmotorsports.com) .... *TO PURCHASE CALL TOLL FREE: 1-877-FOR-CARZ (1-877-367-2279) or 1-877-4MY-CARZ (1-877-469-2279)**IN ATLANTA CALL: 678-574-4298* (https://www.carmotorsports.com/miva/merchant.mv?Screen=BASK&Store_Code=CM)*TO FAX CALL: 770-486-6886* (https://www.carmotorsports.com/miva/merchant.mv?Screen=BASK&Store_Code=CM)Postal address CARMotorsports, PMB 346 2774 N. Cobb Pkwy, Suite 109
Kennesaw, GA 30152 Electronic mail General Information: CAR@carmotorsports.com (CAR@carmotorsports.com)

However
I have info on someone who DOES make emblems for a living.
From what I hear these are the "go-to" guys when it comes to making custom emblems... Give it a look...
http://www.motorheadjewelry.com (http://www.motorheadjewelry.com)

Since these have NOT been or being made yet by Car Motorsports. Maybe we should ask someone who actually does this thing for a living to make them.

Should someone be a central point of contact for this ?

[texascorvette]

Are we talking about something to replace the Polish waterfall on the grill and trunk lid?

[rocknrod]

Are we talking about something to replace the Polish waterfall on the grill and trunk lid?Yes:) ..........

[CaptRoadking]

Count me in ...

[Bobby Clobber]

Canada calling, I'm interested :D :burnout:

[Donny Carlson]

I appreciate the information about Motorhead Jewelry. They could do this work, I am sure. But, unless somebody is willing to take the lead, put up the money for setup and other fees, contact them, supply them with artwork, etc, etc, etc, then all this "me too" stuff is just drawing attention away from a source that has already done all the preproduction work on this emblem.

This thread is here to convince Car Motorsports to go ahead and produce the emblem they've already designed. If you are interested in buying such an emblem, then TELL THEM by sending an email. Posting a reply here is not gonna get it done, and jumping on the band wagon for another source is not gonna help.

CAR@carmotorsports.com this email address works.

[gonzo50]

This thread is here to convince Car Motorsports to go ahead and produce the emblem they've already designed. If you are interested in buying such an emblem, then TELL THEM by sending an email.
CAR@carmotorsports.com this email address works.
Thanks Donny, just sent them an e-mail on my interest for the GodsHead Emblem, will purchase the S-55 Emblem this week. :rasta:

[texascorvette]

I just emailed them. If they are chrome plated metal and not insanely expensive, I plan to buy a set.

[Joe Walsh]

I just emailed them. If they are chrome plated metal and not insanely expensive, I plan to buy a set.

Ditto....Email sent.

[rocknrod]

Ttt..........

[texascorvette]

Anyone had a response to their email?

[rocknrod]

Anyone had a response to their email?Nope. I think their just counting right now.

[DEFYANT]

With the poor sales of the trunk lid liners and UHL, they are skeptical towards making a large investment into this limited market.

Bottom line is, dont step up and say you'll purchase it an item is developed and then not buy. Thats from Car Motorsports, not me.

[duhtroll]

Is there a picture (even photoshop or something) of what these would look like?

not trying to be offensive, just not going to commit to anything w/o a visual.

Thanks,
-A

[rocknrod]

.......Bottom line is, dont step up and say you'll purchase it an item is developed and then not buy. Thats from Car Motorsports, not me.Bottom line for me is, I'm buying em even if Car Motorsports doesnt make em. SOMEONE will !
Until then however I am being a team player.

[Dave Compson]

I sent off my email yesterday, and im anxiously awaiting a response.

holding my breath....

[RCSignals]

........................... drawing attention away from a source that has already done all the preproduction work on this emblem.




Just curious.
Has money been spent for setup and other fees with Car Motorsports already for this emblem?
What actual preproduction work has been done on the GH emblem?

Drawings? Moulds? Wax model?

Could it not be sent to any manufacturer willing to do the task?

[FordNut]

Just curious.
Has money been spent for setup and other fees with Car Motorsports already for this emblem?
What actual preproduction work has been done on the GH emblem?

Drawings? Moulds? Wax model?

Could it not be sent to any manufacturer willing to do the task?
They're doing it all themselves.

[texascorvette]

there are a few of us who might send them the money in advance, if they tell us how much they'll cost and show us what they'll look like.

[DEFYANT]

there are a few of us who might send them the money in advance, if they tell us how much they'll cost and show us what they'll look like.
That is exactly what I suggested to them. We'll see what they decide. In my talks with them, sales seemed brisk, so I am optimistec.

[rocknrod]

Ttt.........

[rocknrod]

Back up there.....

[Svashtar]

Email sent!

[rocknrod]

Ttt..........:)

[03SILVERSTREAK]

From their website:
The best way to contact us is by sending us an email at CAR@carmotorsports.com (car@carmotorsports.com) .... *TO PURCHASE CALL TOLL FREE: 1-877-FOR-CARZ (1-877-367-2279) or 1-877-4MY-CARZ (1-877-469-2279)**IN ATLANTA CALL: 678-574-4298* (https://www.carmotorsports.com/miva/merchant.mv?Screen=BASK&Store_Code=CM)*TO FAX CALL: 770-486-6886* (https://www.carmotorsports.com/miva/merchant.mv?Screen=BASK&Store_Code=CM)Postal address CARMotorsports, PMB 346 2774 N. Cobb Pkwy, Suite 109
Kennesaw, GA 30152 Electronic mail General Information: CAR@carmotorsports.com (CAR@carmotorsports.com)
My E-Mail was sent... :banana2: :banana2:

[FastMerc]

Are we talking about something to replace the Polish waterfall on the grill and trunk lid? What he said ehwre do they go?

[rayjay]

I'd be interested in a set if they will look ok on the front fenders as badges. The classic MM I've been looking at has small godheads on the front fenders.

[rocknrod]

These replace the front and rear waterfall with the type of emblem thats on the center of the wheels. I cant' find the pics but I will......:)

[ncmm]

I just emailed too, hope they do this for us! :D

[CRUZTAKER]

I am not particularly interested, but one thing struck me from the very first post the day I saw it...and it still strikes me as well as others....

What exactly is being offered? What is it's application? And what will it look like?

[duhtroll]

Ditto! .......


I am not particularly interested, but one thing struck me from the very first post the day I saw it...and it still strikes me as well as others....

What exactly is being offered? What is it's application? And what will it look like?

[modular46]

Ditto! .......


What he said ^^^

[rocknrod]

Looks kinda like these:

http://www.mercurymarauder.net/forums/attachment.php?attachmentid=69 34

http://www.mercurymarauder.net/forums/attachment.php?attachmentid=69 35

[SergntMac]

What exactly is being offered? What is it's application? And what will it look like? I need to know more too.

What does this emblem look like? I know what a godshead wheel center cap looks like, and I know it's size in relationship to our front and rear exterior badges. But, I'd like to see some artwork on this new offering, and hopefully something "in scale" so I can connect it with something familiar to me.

When Marty and I offered lapel pins, and (later) fender badges, I posted pics of samples with a common ruler and a coin (US. Quarter) in the pic, so, everyone could see an actual size.

When Donny offered his S55 badges, no such example was included. Later (and only after orders were fulfilled and customers posted their own pics), I was disappointed to see the actual size of the S55 badges. They were much smaller than I had hoped for, and didn't fit where I wanted to fit mine. It's history now, no problems, but before I consider any more offerings from members here, I need to see more pics, and pics with more detail, like showing actual scale. If the offering fits anywhere on my Marauder, or, in my life, I'm in!

BTW...Who's running this racket, Defyant, or, Donny Carlson? One starts the thread, the other has the real 411. What's up with that?

[CRUZTAKER]

Looks kinda like these:

http://www.mercurymarauder.net/forums/attachment.php?attachmentid=69 34



But those have been available since mid 2003 from a fellow in Canada. :confused:
Or of course many of us made them ourselves.

Perhaps Donny speaks of something CAST. Something exta-ordinary....

I'll be waiting. Anticipating....;)

[MarauderMark]

Looks kinda like these:

http://www.mercurymarauder.net/forums/attachment.php?attachmentid=69 34

http://www.mercurymarauder.net/forums/attachment.php?attachmentid=69 35


Now the back badge looks good but the front you can see were the hockey sticks in the sides. if the front could look like the back now were talkin:up:

[Donny Carlson]

Sometimes I wonder if posts are read, or if read, if memories fail some of us.

Anywho, here goes.

As I have stated before, I have no interest in these emblems other than as a consumer. I was looking for somebody to make these (the S-55 emblems) and sell them to me. Car Motorsports responded that they would produce these emblems if there was enough interest.

I posted a thread that was there to gauge interest in such a product, and reponse was good enough that Car Motorsports decided to put up the money and time to make these. The questions of what size it was to be, what color, what typeface, was answered when I said I wanted an emblem that closley resembled the REAR TAILLIGHT emblem on the Roush S-55 SEMA Marauder.
I was given a copy of the artwork:

http://www.mercurymarauder.net/gallery/data/500/S55proto.JPG

which I posted here in a thread. This is the size of the emblem, has always been the size, and I can't help it if you now think it's too small.

This emblem was "test fit" using a 1:1 cutout on paper on my car.

Here is that shot. I also posted this in the thread. The actual emblem is this size.

http://www.mercurymarauder.net/gallery/data/500/medium/DSC01778.JPG (http://www.mercurymarauder.net/gallery/showphoto.php?photo=5961&size=big&cat=500&page=7)


Later, when they were available, I was the first person to order them and posted pics of the acutal emblems with a key fob as scale:

http://www.mercurymarauder.net/gallery/data/500/medium/DSC01866.JPG (http://www.mercurymarauder.net/gallery/showphoto.php?photo=7414&size=big&cat=500&page=2)

When I announced that Car Motorsports had told me they were ready, I posted pics of both types supplied from them as well. Since then, actual on the car photos have appeared.


I need to know more too.

What does this emblem look like? I know what a godshead wheel center cap looks like, and I know it's size in relationship to our front and rear exterior badges. But, I'd like to see some artwork on this new offering, and hopefully something "in scale" so I can connect it with something familiar to me.I have not seen the GH emblem, and only know what has been described to me in emails and from other members on here who spoke with Alan and Rich of Car Motorsports at the Southern Marauders breakfast. What I was told was that it would be a chromed metal emblem (and if you've seen the chromed S55 badge you'll see the quality), a direct replacement for the front and read waterfall emblems, only with the Mercury Head. When somebody says "direct replacement" I take that to be a 1:1 scale.

It would be nice to have a graphic like the S55 art, but then that's up to Car Motorsports to provide.


When Marty and I offered lapel pins, and (later) fender badges, I posted pics of samples with a common ruler and a coin (US. Quarter) in the pic, so, everyone could see an actual size.

When Donny offered his S55 badges, no such example was included. Later (and only after orders were fulfilled and customers posted their own pics), I was disappointed to see the actual size of the S55 badges. They were much smaller than I had hoped for, and didn't fit where I wanted to fit mine. It's history now, no problems, but before I consider any more offerings from members here, I need to see more pics, and pics with more detail, like showing actual scale. If the offering fits anywhere on my Marauder, or, in my life, I'm in! True, no ruler or coin to scale, but the artwork DID have the dimensions, and I did post a 1:1 paper replica ON MY CAR for comparison. Also, before anyone else had ordered it I showed it in scale with a keyfob.

And let's make this clear -- I WAS NOT and AM NOT "offering" this product.


BTW...Who's running this racket, Defyant, or, Donny Carlson? One starts the thread, the other has the real 411. What's up with that?Car Motorsports is selling these items, not me or Defyant. I assume Defyant spoke with Rich and got information from him. I've only spoken to Rich once, when I ordered my emblems. I traded emails with Alan several times.

This thread was started by me in hopes that a good enough response would encourage CM to proceed with the Gods Head emblems and offer them for sale. Again, I have no business relationship with CM, no financial interest at all, and will pay the exact same price as anyone else for the emblems. I want them to make this product. As was explained, they were disappointed that their UHL and Trunk Liners did not sell as well as they had hoped, and they were hesitant to expend funds on another product that would have too few sales to be justified. I think the GH badge will sell.

Now, regarding the other GH emblems. I have these on my car, and they are very good quality even though they are plastic. The impression I got about these (which could be different now that it's over a year later) is that they weren't being made any more and that remaining stock was low or sold out.
It's possible that you could still get these, though I don't recall who the vendor was or how to contact him. Try asking the vendor to PM you, I think he's on here regularly.

It all boils down to this, and this is true whether its emblems, air deflectors, cold air intakes, or control arms. Buy what YOU want, what makes you happy and what you think would be great for your car. You don't like a product, don't buy it. Simple as that.

[fastblackmerc]

Now the back badge looks good but the front you can see were the hockey sticks in the sides. if the front could look like the back now were talkin:up:
I removed all the "hockey sticks" from ny front badge, just painted it all black inside and centered the godshead.

[seans]

Donny Carlson, thanks to you and the few others that come up with all of these great ideas for improving our great cars. Your time and effort is greatly appreciated.:banana:

[texascorvette]

well, after reading every single post, I still can't tell if--or where--we can buy the replacement GH emblems, what they might be made of, etc.

[rocknrod]

It was pretty clear to me........

[FordNut]

well, after reading every single post, I still can't tell if--or where--we can buy the replacement GH emblems, what they might be made of, etc.
They will be metal, not sure about the appearance but high quality is assured.

[Dave Compson]

Still anxious, after reading this thread i hope they get made.

[duhtroll]

I'm still a bit confused. (even with the "duh" messages) We don't know what these are going to look like, so that's probably why people aren't stepping up.

If they are going to look just like the dremel/centercap badges shown on several MMs (including mine), I have to question why do this in the first place.

I mean, I already have those badges.

You can make your own for less than $50. Mine cost me a few hours' labor with the dremel, and parts totalling less than $30. If *I* can do this (not technically minded and definitely not exp. with tools) then anyone can.

Now, if we are talking something different, then I'm all for it. Personally, I would like to see an outline badge similar to the godshead badges made for our steering wheels and keychains. That would be incredibly classy and far superior to what I have made myself.

It's not that people are against doing this, but we need some clarification. If this company wants to do this, we should be seeing some artwork from somebody, either one of us or within the company. I highly doubt many people are going to lay down cash sight unseen.

-A

[Svashtar]

I'm still a bit confused. (even with the "duh" messages) We don't know what these are going to look like, so that's probably why people aren't stepping up.

If they are going to look just like the dremel/centercap badges shown on several MMs (including mine), I have to question why do this in the first place.

I mean, I already have those badges.

You can make your own for less than $50. Mine cost me a few hours' labor with the dremel, and parts totalling less than $30. If *I* can do this (not technically minded and definitely not exp. with tools) then anyone can.

Now, if we are talking something different, then I'm all for it. Personally, I would like to see an outline badge similar to the godshead badges made for our steering wheels and keychains. That would be incredibly classy and far superior to what I have made myself.

It's not that people are against doing this, but we need some clarification. If this company wants to do this, we should be seeing some artwork from somebody, either one of us or within the company. I highly doubt many people are going to lay down cash sight unseen.

-A I don't care if it's the same as the homemade ones, or slightly different. As long as it is metal and has a silver appearance and replaces the rear hockey stick and is the same diameter and rough dimension, and is as well done as their other work then I am for it. If they are going to look exactly like the nice one you made, then why wouldn't I save myself a boatload of time and effort and buy one? So your question makes no sense to me.

Obviously if you already have them made you wouldn't buy one, so I have to ask, why are you even commenting on this thread?

If you want steering wheel and keychain badges, then I would politely suggest that you work with CM or someone else, and start another thread about those rather than trying to change the direction of this one to get them to accomodate what you personally need. (If that is not the case, my apologies, but that was my perception.) For my steering wheel badge I contacted Alan and bought a couple that look very nice. I'm doing without the key badge.

Personally I _have_ seen a lot of interest, and would be glad to prepay for one sight unseen.

And thanks Donny for all the 411 on this from Car Motorsports. I understand you are in no way driving this or are involved in the sale, but we are getting the best info from you.

Regards,

Norm

[duhtroll]

Obviously if you already have them made you wouldn't buy one, so I have to ask, why are you even commenting on this thread?

Ahem . . . "because we DON'T KNOW WHAT THEY LOOK LIKE YET." Ahem.


If you want steering wheel and keychain badges, then I would politely suggest that you work with CM or someone else, and start another thread about those rather than trying to change the direction of this one to get them to accomodate what you personally need. (If that is not the case, my apologies, but that was my perception.)

Please reread my message. I was *not* asking for them to "accomodate what I personally need."



Personally I _have_ seen a lot of interest, and would be glad to prepay for one sight unseen.


Glad you're willing to take the risk. Until we know what they look like, however, I am certain I am not the only one who is going to hang onto his money.

-A

[Alan CMS]

I spoke with Warren yesterday and outlined to him the following on the God's Head Emblems.

Design of the emblems will be exactly like those on the car now with mounting studs and locating tabs. The sizing will be the same. This will ensure an exact fit. The emblems will be chrome and black. The black circle will have MERCURY at the top, MARAUDER at the bottom and the God's Head in the center.

Presently, I am awaiting final molding and cost figures for these emblems. They will be MOLDED and not laser/CNC cut for various production reasons. I will be able to post the artwork but not an actual emblem. You should be aware that the artwork just gives you a look at the layout/appearance. At that point, a pre-purchase will be offered with pricing and payment info posted here. We will then order the number of emblems needed to fill all pre-purchases.

Thanks,

Alan

[rocknrod]

..
I mean, I already have those badges.

You can make your own for less than $50. Mine cost me a few hours' labor with the dremel, and parts totalling less than $30. If *I* can do this (not technically minded and definitely not exp. with tools) then anyone can.
..Why then, even CLICK on this link ?
Boo-Bye

[duhtroll]

This had been answered, genius.

Twice.

-A

[Canadasvt]

Still anxious, after reading this thread i hope they get made.
Same here:woohoo:

[Donny Carlson]

I spoke with Warren yesterday and outlined to him the following on the God's Head Emblems.

Design of the emblems will be exactly like those on the car now with mounting studs and locating tabs. The sizing will be the same. This will ensure an exact fit. The emblems will be chrome and black. The black circle will have MERCURY at the top, MARAUDER at the bottom and the God's Head in the center.

Presently, I am awaiting final molding and cost figures for these emblems. They will be MOLDED and not laser/CNC cut for various production reasons. I will be able to post the artwork but not an actual emblem. You should be aware that the artwork just gives you a look at the layout/appearance. At that point, a pre-purchase will be offered with pricing and payment info posted here. We will then order the number of emblems needed to fill all pre-purchases.

Thanks,

Alan
Alan,

Thanks. I'll take two. You have my Amex, or if you prefer I can fax the info again.

[03SILVERSTREAK]

I spoke with Warren yesterday and outlined to him the following on the God's Head Emblems.

Design of the emblems will be exactly like those on the car now with mounting studs and locating tabs. The sizing will be the same. This will ensure an exact fit. The emblems will be chrome and black. The black circle will have MERCURY at the top, MARAUDER at the bottom and the God's Head in the center.

Presently, I am awaiting final molding and cost figures for these emblems. They will be MOLDED and not laser/CNC cut for various production reasons. I will be able to post the artwork but not an actual emblem. You should be aware that the artwork just gives you a look at the layout/appearance. At that point, a pre-purchase will be offered with pricing and payment info posted here. We will then order the number of emblems needed to fill all pre-purchases.

Thanks,

Alan
My thanks to Donny and Alan for for keeping this going and for bring out this fine product. once the Gods Head Emblem comes out , Ill take an order for the front grill Emblem...:D :cool4: :banana: :up:

[CRUZTAKER]

I spoke with Warren yesterday and outlined to him the following on the God's Head Emblems.

Design of the emblems will be exactly like those on the car now with mounting studs and locating tabs. The sizing will be the same. This will ensure an exact fit. The emblems will be chrome and black. The black circle will have MERCURY at the top, MARAUDER at the bottom and the God's Head in the center. ....Alan

Good answer and to the point.

Excited to see the first run.

[Hotrauder]

Thank you Alan and a big 2 thumbs-up to Donny Carlson and Defyant for making the juice for this project. Alan, in my email I asked about MM items not yet appearing on your web site as of 8-20-05. I find many references to this in the forum spaces.:confused: We are all looking for the least pain method for ordering STUFF. Thanks for your work on these emblem projects and listening to this rant.Dennis:help: Oh, most important; sign me up for 1 S55 and 2 GodsHeads. :pimp: Thanks
I spoke with Warren yesterday and outlined to him the following on the God's Head Emblems.

Design of the emblems will be exactly like those on the car now with mounting studs and locating tabs. The sizing will be the same. This will ensure an exact fit. The emblems will be chrome and black. The black circle will have MERCURY at the top, MARAUDER at the bottom and the God's Head in the center.

Presently, I am awaiting final molding and cost figures for these emblems. They will be MOLDED and not laser/CNC cut for various production reasons. I will be able to post the artwork but not an actual emblem. You should be aware that the artwork just gives you a look at the layout/appearance. At that point, a pre-purchase will be offered with pricing and payment info posted here. We will then order the number of emblems needed to fill all pre-purchases.

Thanks,

Alan

[Alan CMS]

Thank you Alan and a big 2 thumbs-up to Donny Carlson and Defyant for making the juice for this project. Alan, in my email I asked about MM items not yet appearing on your web site as of 8-20-05. I find many references to this in the forum spaces.:confused: We are all looking for the least pain method for ordering STUFF. Thanks for your work on these emblem projects and listening to this rant.Dennis:help: Oh, most important; sign me up for 1 S55 and 2 GodsHeads. :pimp: ThanksThe reason there is no Marauder stuff on our website is two fold. First, we are completing a MAJOR website overhaul and reconstruction that is best described as a total rebuild from ground 0 up. The new site, which I have seen, is (to me) simply amazing. Work started prior to the Marauder products and updates to the existing website are on hold pending launch of the new website. Second, thus far, we have only a few Marauder products (Under Hood Insulators, Trunk Lid Covers, and most recently, S55 emblems). Clearly, this is beginning to grow (we now have premium OEM replacement carpet and will soon add God's Head emblems, embroidered spare tire covers, and several other products currently in process, including a group purchase on perhaps the best cross-drilled and slotted nickel plated rotors and pads in the business). Our thought is to wait and add things to the site once we have more than 1 or 2 things available.

Thanks,

Alan

[BigMerc]

very nice, I'll want 2 godsheads as well. the underhood piece and the S55, I will be ordering next month from you

[03SILVERSTREAK]

The reason there is no Marauder stuff on our website is two fold. First, we are completing a MAJOR website overhaul and reconstruction that is best described as a total rebuild from ground 0 up. The new site, which I have seen, is (to me) simply amazing. Work started prior to the Marauder products and updates to the existing website are on hold pending launch of the new website. Second, thus far, we have only a few Marauder products (Under Hood Insulators, Trunk Lid Covers, and most recently, S55 emblems). Clearly, this is beginning to grow (we now have premium OEM replacement carpet and will soon add God's Head emblems, embroidered spare tire covers, and several other products currently in process, including a group purchase on perhaps the best cross-drilled and slotted nickel plated rotors and pads in the business). Our thought is to wait and add things to the site once we have more than 1 or 2 things available.

Thanks,

Alan
As Defyant said " If this keeps up Ill be living in my Marauder " but it will be fun...:banana2: :coolman: ;)

[texascorvette]

Sight unseen, they sound like they will look pretty classy. Sure would be nice to have a SWAG about the cost. I'd be interested in one for the nose and the rear of the car.




The reason there is no Marauder stuff on our website is two fold. First, we are completing a MAJOR website overhaul and reconstruction that is best described as a total rebuild from ground 0 up. The new site, which I have seen, is (to me) simply amazing. Work started prior to the Marauder products and updates to the existing website are on hold pending launch of the new website. Second, thus far, we have only a few Marauder products (Under Hood Insulators, Trunk Lid Covers, and most recently, S55 emblems). Clearly, this is beginning to grow (we now have premium OEM replacement carpet and will soon add God's Head emblems, embroidered spare tire covers, and several other products currently in process, including a group purchase on perhaps the best cross-drilled and slotted nickel plated rotors and pads in the business). Our thought is to wait and add things to the site once we have more than 1 or 2 things available.

Thanks,

Alan

[Meteorite]

I am interested in 2 God's Head Emblems.


I spoke with Warren yesterday and outlined to him the following on the God's Head Emblems.

... At that point, a pre-purchase will be offered with pricing and payment info posted here. We will then order the number of emblems needed to fill all pre-purchases.

Thanks,

Alan

[modular46]

I am interested in one for the grille.

[Rollin'Thunder]

I'm up for both the front and rear badges.

[SideshowBob]

I sent an e-mail a few days ago, but never got an answer. Have they responded to anyone else?

[texascorvette]

not that I'm aware of.
I sent an e-mail a few days ago, but never got an answer. Have they responded to anyone else?

[Alan CMS]

I sent an e-mail a few days ago, but never got an answer. Have they responded to anyone else?
The posting above is the response. Easier to do a post here than respond to 50 emails.

Alan

[rocknrod]

not that I'm aware of.Here's your answer:
"Originally Posted by Alan CMS
I spoke with Warren yesterday and outlined to him the following on the God's Head Emblems.

... At that point, a pre-purchase will be offered with pricing and payment info posted here. We will then order the number of emblems needed to fill all pre-purchases.

Thanks,

Alan"

[gonzo50]

I'm up for both the front and rear badges.
Same here, two GodsHead badges, and also two S55 badges please..... :bows:

[johnfain]

I am up for two godshead badges, front and rear.

[rocknrod]

Ttt..........:)

[rocknrod]

I'm not letting this go away.

[Marauder2005]

I am interested in two Gods Head Emblems as well, front and rear....

[ncmm]

me again, I would like to order two GodsHead emblems please, thank you

[Dave Compson]

So, do we have the ordering info yet? Or we still waiting? I see people asking for the emblems, but havent read for sure if the company is making them?

[spub]

Im up for 2 (front and rear) if this indeed comes to fruition!

Kirt

[texascorvette]

I feel kind of guilty worrying about grill ornamentation when there are folks with no food and no home..........but,I consider myself at least a semi-intelligent person, and I have yet to see a post that lists price, ordering info, and a picture of the finished product. I'd like a set, too, if they are quality products that are reasonably priced.

[rocknrod]

I feel kind of guilty worrying about grill ornamentation when there are folks with no food and no home..........but,I consider myself at least a semi-intelligent person, and I have yet to see a post that lists price, ordering info, and a picture of the finished product. I'd like a set, too, they are quality products that are reasonably priced.
I feel lucky to have my MM and want to ensure it gets everything I can give it, because there are people out there that don't have one or don't take care of what They have.
I dont care what they cost. I'm buying them.
Do a search for pics, they exist

Just remember what your mom told ya, "there are people in China.........."

[FordNut]

I feel lucky to have my MM and want to ensure it gets everything I can give it, because there are people out there that don't have one or don't take care of what They have.
I dont care what they cost. I'm buying them.
Do a search for pics, they exist

Just remember what your mom told ya, "there are people in China.........."
These particular ones do not exist...yet. I'm hoping they get produced too.

[Hotrauder]

These particular ones do not exist...yet. I'm hoping they get produced too.

When I spoke with CAR (while ordering the S55 badge) a couple of weeks ago they indicated they were close. This thread indicates to me IMHO that there is a lot of interest and they seem to have gotten the word. Allen couldn't resist a reference to their disappointment with the lack of response to trunk and hood liners however. They are nice but until I have a SC to show off or a surprise in the trunk seems like a $ well spent in other directions situation:cool: .

[X369]

Any news on the Godshead badges yet?

Ron

[Marauder2005]

Any news on the Godshead badges yet?

Ron
I would guess not....

[rocknrod]

I'm chompin at the bit over here!:food:

[rocknrod]

How many of these post's do we have?

[huot5]

If carmotorsports can do something like the dimensional emblems like the other site, I am down for a a front and rear or rear god's head at least.
has someone sent carmotorsports a pic of a modded waterfall with the godshead inserted. I will email them the pic of my front one right now.

[warren]

[QUOTE=Alan CMS]I spoke with Warren yesterday and outlined to him the following on the God's Head Emblems.

Design of the emblems will be exactly like those on the car now with mounting studs and locating tabs. The sizing will be the same. This will ensure an exact fit. The emblems will be chrome and black. The black circle will have MERCURY at the top, MARAUDER at the bottom and the God's Head in the center.

Presently, I am awaiting final molding and cost figures for these emblems. They will be MOLDED and not laser/CNC cut for various production reasons. I will be able to post the artwork but not an actual emblem. You should be aware that the artwork just gives you a look at the layout/appearance. At that point, a pre-purchase will be offered with pricing and payment info posted here. We will then order the number of emblems needed to fill all pre-purchases.

Thanks,

Alan[/QUOT

Alan,

How are we doing any update on final molding specs. etc.
Many are ready to put $ on the line.

Warren

[rocknrod]

Okay, Any news ?

[Hotrauder]

Okay, Any news ?
Alan says (today) that there is no news. He is having trouble communicating with their supplier. Says it may be weather related? :(

[texascorvette]

they are about as fast as your kids, when you want something done.

[BIGGDOGG]

they are about as fast as your kids, when you want something done.Thank you for your kind and supportive words. We came through quickly with the S-55 Emblems, also did the embroidered UHI and TLC offering in a timely fashion. Now we are trying to get it right with the Godshead Emblems. This one has been a challenge, so far nothing has been acceptable in terms of quality and appearance. We are waiting for our samples to arrive and then move them to another engineer if needed. We do not want more time to pass either. All this investment of time does us no good. Soooo....we don't like the wait any better than you do. Give us a call toll free at the number listed below if you have suggestions that can help us be more responsive to you. We really do want to help.

Rich
CAR Motorsports
1-877-367-2279...toll free

[huot5]

[QUOTE=Alan CMS]I spoke with Warren yesterday and outlined to him the following on the God's Head Emblems.


Design of the emblems will be exactly like those on the car now with mounting studs and locating tabs. The sizing will be the same. This will ensure an exact fit. The emblems will be chrome and black. The black circle will have MERCURY at the top, MARAUDER at the bottom and the God's Head in the center.

Presently, I am awaiting final molding and cost figures for these emblems. They will be MOLDED and not laser/CNC cut for various production reasons. I will be able to post the artwork but not an actual emblem. You should be aware that the artwork just gives you a look at the layout/appearance. At that point, a pre-purchase will be offered with pricing and payment info posted here. We will then order the number of emblems needed to fill all pre-purchases.

Thanks,

Alan[/QUOT

Alan,

How are we doing any update on final molding specs. etc.
Many are ready to put $ on the line.

Warren
sounds good. hopefully the designers come thru with a kickazz repro and when CM can start taking deposits. pics will help the cause. thanks for all the work some of you guys are puttin in for this.

[texascorvette]

I was kidding. Sorry I did such a poor job of it.
Thank you for your kind and supportive words. We came through quickly with the S-55 Emblems, also did the embroidered UHI and TLC offering in a timely fashion. Now we are trying to get it right with the Godshead Emblems. This one has been a challenge, so far nothing has been acceptable in terms of quality and appearance. We are waiting for our samples to arrive and then move them to another engineer if needed. We do not want more time to pass either. All this investment of time does us no good. Soooo....we don't like the wait any better than you do. Give us a call toll free at the number listed below if you have suggestions that can help us be more responsive to you. We really do want to help.

Rich
CAR Motorsports
1-877-367-2279...toll free

[BigMerc]

Good to hear something, I need some S-55's and the hood liner. will get all 3 when these are done. thanks for the update

[Two Hawks]

We are waiting for our samples to arrive and then move them to another engineer if needed.
Rich
CAR Motorsports
1-877-367-2279...toll free :2thumbs:

Thanks Rich, for your patience and time in trying to provide us with a quality item.
Be patient, don't rush it, all good things come in, their, time.

BTW, put me on the list of those who are interested. :D :D

[the_pack_rat]

Thank you for your kind and supportive words. We came through quickly with the S-55 Emblems, also did the embroidered UHI and TLC offering in a timely fashion. Now we are trying to get it right with the Godshead Emblems. This one has been a challenge, so far nothing has been acceptable in terms of quality and appearance. We are waiting for our samples to arrive and then move them to another engineer if needed. We do not want more time to pass either. All this investment of time does us no good. Soooo....we don't like the wait any better than you do. Give us a call toll free at the number listed below if you have suggestions that can help us be more responsive to you. We really do want to help.

Rich
CAR Motorsports
1-877-367-2279...toll freeLooking forward to the day this venture becomes a reality.

:up:

[Dragcity]

I'll likely want a pair as well. I would love some pics and pricing. I have been talking to my engineer and fabricating friends and have not gotten any commitment from them. I suppose it's better to work on this as a group rather than individually, so I'll join the bandwagon.


Joe...

[Marauder2005]

Thank you for your kind and supportive words. We came through quickly with the S-55 Emblems, also did the embroidered UHI and TLC offering in a timely fashion. Now we are trying to get it right with the Godshead Emblems. This one has been a challenge, so far nothing has been acceptable in terms of quality and appearance. We are waiting for our samples to arrive and then move them to another engineer if needed. We do not want more time to pass either. All this investment of time does us no good. Soooo....we don't like the wait any better than you do. Give us a call toll free at the number listed below if you have suggestions that can help us be more responsive to you. We really do want to help.

Rich
CAR Motorsports
1-877-367-2279...toll free
Thanks for the info "BigDog", Looking forward to your great product.

[KilledKenny]

Has anyone thought about finding out who did the Gods heads on the original prototype S55? The spec sheet says that Lacks did the grill badge. Just a thought. :)

http://crownvicmuscle.com/gallery/popup_shell.php?folder=s55&imageName=s55_front.jpg&imageWidth=1024&imageHeight=768&picCaption=S55%20front%20stanc e

http://crownvicmuscle.com/gallery/popup_shell.php?folder=s55&imageName=s55_specs.jpg&imageWidth=1024&imageHeight=768&picCaption=S55 Window Spec Sheet

[Donny Carlson]

Has anyone thought about finding out who did the Gods heads on the original prototype S55? The spec sheet says that Lacks did the grill badge. Just a thought. :)

http://crownvicmuscle.com/gallery/popup_shell.php?folder=s55&imageName=s55_front.jpg&imageWidth=1024&imageHeight=768&picCaption=S55%20front%20stanc e

http://crownvicmuscle.com/gallery/popup_shell.php?folder=s55&imageName=s55_specs.jpg&imageWidth=1024&imageHeight=768&picCaption=S55 Window Spec Sheet
I was unable to contact anyone at DST Industries refarding their work on the SEMA car, or at least anyone who was interested in answering my letters. My inquiries to Rousch, who commissioned the car, was that they could not help me nor had any of the parts used on the car available for public sale.

[BIGGDOGG]

Thanks for the info "BigDog", Looking forward to your great product.
We now have a 30 year expert in Emblem Design on the project so I/we expect to have some pictures by the end of this month. our goal is to make both the nose emblem and the rear deck emblem look like the wheel cover Godshead. As in all chrome. Big difference of course is that our product will be composite metal not the cheapo plastic on the wheel cover. I do love making great emblems. We have produced dozens and dozens of winner emblems...I expect this to come out the same. Personally, I am a advocate of refined elegance in an emblem versus a busy/distracting look. In short...the emblem should allow you to keep moving your eyes over the vehicle not fixed on the emblems attempting to figure it out.

Keep your fingers crossed, Bigg Dogg is all over it.

Thanks, Rich

[03SILVERSTREAK]

Thank god something is finally happening...

[Marauder2005]

We now have a 30 year expert in Emblem Design on the project so I/we expect to have some pictures by the end of this month. our goal is to make both the nose emblem and the rear deck emblem look like the wheel cover Godshead. As in all chrome. Big difference of course is that our product will be composite metal not the cheapo plastic on the wheel cover. I do love making great emblems. We have produced dozens and dozens of winner emblems...I expect this to come out the same. Personally, I am a advocate of refined elegance in an emblem versus a busy/distracting look. In short...the emblem should allow you to keep moving your eyes over the vehicle not fixed on the emblems attempting to figure it out.

Keep your fingers crossed, Bigg Dogg is all over it.

Thanks, Rich
Thats great news man, thanks for the info. Can not wait, good luck w/ the

project as well :coolman:

[Hotrauder]

Thanks guys. We are eagerly waiting with CASH er, credit cards..I mean. We really appreciate your efforts and understand that it has not been easy. We are grateful that you are willing to make the financial investment in creating this Emblem on spec. We will not let you down! Dennis:beer:

[the_pack_rat]

We now have a 30 year expert in Emblem Design on the project so I/we expect to have some pictures by the end of this month. our goal is to make both the nose emblem and the rear deck emblem look like the wheel cover Godshead. As in all chrome. Big difference of course is that our product will be composite metal not the cheapo plastic on the wheel cover. I do love making great emblems. We have produced dozens and dozens of winner emblems...I expect this to come out the same. Personally, I am a advocate of refined elegance in an emblem versus a busy/distracting look. In short...the emblem should allow you to keep moving your eyes over the vehicle not fixed on the emblems attempting to figure it out.

Keep your fingers crossed, Bigg Dogg is all over it.

Thanks, Rich Sounds good ... I look forward to them.


http://mercurymarauder.net/forums/images/smilies/banana2.gif

[FastMerc]

I cant wait till they are available,sounds like a cool item!

[BIGGDOGG]

I cant wait till they are available,sounds like a cool item!Hopefully beyond cool. I do need a quick show of hands for one of two designs. First and foremost the front and rear emblems will be indentical in there appearance and direct replacements for the factory waterfall emblems. I do need a quick show of hands for one of two designs. The first design would be the Godshead molded like it is on the Plastic Wheel Cap Covers. This three dimensional design would be very very heavy in the medal chromed. The second design would feature the use of Cloissone' design techniques with the Godhead appearing chrome as brilliant as a Rolex watch. Again weighty and a very durable two dimensional design which will outlive the paint on the car. After years of experience producing and selling both custom and resoration OEM emblems, it is my humble opinion that the height of the three dimensional design will be more prone to damage and have inherently less protection. Fine for Plastic Wheel Caps but no my first choice for panel or grill emblems. The two dimensional design is my choice for both beauty and functionality. I also see no need to match the Plastic Wheel Cap in height for there is no advantage to it will be would be sacrificing ultimate beauty and a luxury appearance. I will have prototypes later this week. Time for the Marauder Heads to weigh in.........

Rich
CAR Motorsports

[Marauder2005]

Its hard to say w/out pics but # 2 seems nice :)

[texascorvette]

I vote for the 3-dimensional.




Hopefully beyond cool. I do need a quick show of hands for one of two designs. First and foremost the front and rear emblems will be indentical in there appearance and direct replacements for the factory waterfall emblems. I do need a quick show of hands for one of two designs. The first design would be the Godshead molded like it is on the Plastic Wheel Cap Covers. This three dimensional design would be very very heavy in the medal chromed. The second design would feature the use of Cloissone' design techniques with the Godhead appearing chrome as brilliant as a Rolex watch. Again weighty and a very durable two dimensional design which will outlive the paint on the car. After years of experience producing and selling both custom and resoration OEM emblems, it is my humble opinion that the height of the three dimensional design will be more prone to damage and have inherently less protection. Fine for Plastic Wheel Caps but no my first choice for panel or grill emblems. The two dimensional design is my choice for both beauty and functionality. I also see no need to match the Plastic Wheel Cap in height for there is no advantage to it will be would be sacrificing ultimate beauty and a luxury appearance. I will have prototypes later this week. Time for the Marauder Heads to weigh in.........

Rich
CAR Motorsports

[04funmerc]

I would also like to order a front and back emblem set, pics would be nice, majority rules and I would like something that looks good and will stand the test of time..

THANKS FOR ALL THE R&D YOU'RE DOING!

JIM

[Hotrauder]

My first impulse is for the 3 dimensional emblem. However, should that not be practical or not the majority choice then I will be happy with the 2 dimensional. I will purchase either.
Thanks, Rich, for all the time, effort and money you guys have invested in this project. I predict these embems will stimulate sales of your other MM offerings too. Dennis:beer:

[Black 04]

My vote would be the two dimensional design. The three dimensional may protrude out and may loose the sleek look, but I guess pictures will be the deciding vote.

[the_pack_rat]

Based upon what Rich said & his personal experience ...

I guess I'll go with the 2 dimensional.

[FordNut]

Hopefully beyond cool. I do need a quick show of hands for one of two designs. First and foremost the front and rear emblems will be indentical in there appearance and direct replacements for the factory waterfall emblems. I do need a quick show of hands for one of two designs. The first design would be the Godshead molded like it is on the Plastic Wheel Cap Covers. This three dimensional design would be very very heavy in the medal chromed. The second design would feature the use of Cloissone' design techniques with the Godhead appearing chrome as brilliant as a Rolex watch. Again weighty and a very durable two dimensional design which will outlive the paint on the car. After years of experience producing and selling both custom and resoration OEM emblems, it is my humble opinion that the height of the three dimensional design will be more prone to damage and have inherently less protection. Fine for Plastic Wheel Caps but no my first choice for panel or grill emblems. The two dimensional design is my choice for both beauty and functionality. I also see no need to match the Plastic Wheel Cap in height for there is no advantage to it will be would be sacrificing ultimate beauty and a luxury appearance. I will have prototypes later this week. Time for the Marauder Heads to weigh in.........

Rich
CAR Motorsports

2-d is my preference.

[ncmm]

I'm still in for a pair, 2D seems to be winning but pics will sell the design.
Please keep us posted and thanks BIGGDOGG for going ahead with this item!

[Rollin'Thunder]

I'm in for both front and rear, either 3 dimentional or 2 dimentional. :thanks:

[FW_Linc/Merc]

I have been waiting a long time before sounding in on these. I have really wanted them but have been waiting on pics before commiting. I am now convinced that both designs will be GREAT! That said my vote is for the second design. Others have already done the center cap mod and if that is what you want details have been posted on how to do it. Yes design one would be better than the mod but from a distance it would look the same. I like the idea of the second design. The front and rear do NOT have to match the wheels and NOT matching the wheels would give the front and rear some additional visual interest. Just my inputs and yes I will be buying some for sure now!

[seans]

I will also take at leat one pair of either design but I think the 2-dimensional would be the better choice.


Thanks for all of your time and effort on this project!

[Dragcity]

2-D get my vote. I am interested in $$$ before commitment of order, ballpark would be good. I'm likely in for front and rear.

[Canadasvt]

They both sound good to me.

[CaptRoadking]

Either will work for me. What ever the finally choice I'll take a pair.

Ed

[lotusstv]

2D - Count me in for 2.....

[texascorvette]

Is there a guess on the price yet?

[BIGGDOGG]

Is there a guess on the price yet?We do not have final pricing available at this time. Based on discussions and cost estimates our "best guess" is pricing at $69.95 per emblem (front or rear). These medal emblems will be of the highest quality. The Godshead Emblems will among other things, feature a triple plated chrome finish. This process will provide the owner a highly durable emblem with a brilliant finish. Upon receipt of production samples, final pricing and purchase details will be provided.

Rich
CAR Motorsports

[BIGGDOGG]

We have some pre-production artwork for the rear emblem. It is very very brilliant in appearance. There will be no mistaking the emblem for anything but a highly polished Godshead.

Rich
CAR Motorsports

[Joe Walsh]

We have some pre-production artwork for the rear emblem. It is very very brilliant in appearance. There will be no mistaking the emblem for anything but a highly polished Godshead.

Rich
CAR Motorsports


SWEET!!! :banana2: :banana: :beer:

[Hotrauder]

Great:beer: :beer: :beer: dennis

[Svashtar]

Outstanding! Rich, I have been meaning to get in touch with you for the past couple of weeks to follow up on an email I sent you, so will be calling you tomorrow anyway. You can definitely count me in for one of these!

Regards,

Norm

[rocknrod]

Nope.
I will be buying TWO.
Thanks, keep up the good work.

[texascorvette]

is there a link to the artwork?
We have some pre-production artwork for the rear emblem. It is very very brilliant in appearance. There will be no mistaking the emblem for anything but a highly polished Godshead.

Rich
CAR Motorsports

[BIGGDOGG]

is there a link to the artwork?
No link, we are still working hard at the final look and mold checks.

Thanks, Rich
CAR Motorsports

[DEFYANT]

If these come out as nice as the S55 emblems, you have me as a customer again!

You guys do some nice work.

[RR|Suki]

+1!!!!!! I don't like the waterfalls or hockey sticks or whatever they are... even my cougar got it's own emblems >_>

[jimlam56]

Any news?
Thanks, Jim

[Alan CMS]

Any news?
Thanks, Jim

Final production samples are in the process of being made and sent to us. Upon receipt, pictures will be taken and posted of these final samples along with final pricing and instructions for placing orders. The wait is close to over and these are going to be rather exceptional looking pieces.

Alan

[Marauder2005]

Thank you for the update, can't wait ! :banana:

[Hotrauder]

Thanks Alan. We know it has been a long wait for you guys, too. We are about to burst with anticipation. :party1: Dennis

[GordonB]

BIGGDOGG (Rich,
Please put me down for 1 pair of front emblems and 1 pair of rear emblems since I have 2 MMs.
I'll vote for the 2-D ones.
Thanks,
GordonB

[texascorvette]

Any more news?

[BIGGDOGG]

Any more news?
We are awaiting the prototypes for both the front and rear emblems. Hopefully, we will have them very soon.

Rich

[RR|Suki]

good news :D

[Hotrauder]

We are awaiting the prototypes for both the front and rear emblems. Hopefully, we will have them very soon.

Rich


Anything yet? Thanks. Sorry to be pestering you guys but we need to keep the fever high. Dennis:beer:

[glassman99]

Gotta join in. Put me down for a front and back.

[whoskal]

I want some (front and rear) put me on the list!!!!!!
how much??????

[BIGGDOGG]

Anything yet? Thanks. Sorry to be pestering you guys but we need to keep the fever high. Dennis:beer:

CAR Motorsports plans on having the first run samples of the front and rear Godshead Emblems in our hands by Friday of next week. We will take pictures, post them and begin the ordering process. Thank you for keeping the fever high.

Rich
CAR Motorsports

[MNMarauder]

did anything ever happen with this thread>?

[Hotrauder]

CAR Motorsports plans on having the first run samples of the front and rear Godshead Emblems in our hands by Friday of next week. We will take pictures, post them and begin the ordering process. Thank you for keeping the fever high.

Rich
CAR Motorsports

Thanks Rich, that is great news. I expect your front door will be pushed in 12/12/05 as the orders or requests for ordering instructions come flooding in. Thanks you for being there over this long haul. Dennis:beer:

[Bruce Wayne]

I,m in, although I don't find the mercury emblem that offensive

[jimlam56]

Gotta ask again, any news?
Every time I look at the "waterfall" or whatever it's supposed to be I envision ol' Merc in their places.
Thanks, Jim

[BIGGDOGG]

Gotta ask again, any news?
Every time I look at the "waterfall" or whatever it's supposed to be I envision ol' Merc in their places.
Thanks, Jim

Should have pictures by this weekend, then the ordering will begin. Stay tuned for a posting with an attached order sheet detailing all the specifics.

Rich
CAR Motorsports

[Black 04]

Rich,
Sent you a PM

[Marauder2005]

Should have pictures by this weekend, then the ordering will begin. Stay tuned for a posting with an attached order sheet detailing all the specifics.

Rich
CAR Motorsports

Thats to far away, Me want NOW! LOL just kidding, I can't wait to

see them.

Best, Mike

[BIGGDOGG]

Thats to far away, Me want NOW! LOL just kidding, I can't wait to

see them.

Best, Mike

OK, time to update you on the Emblem Specifics prior to providing pictures on Friday night. The details on the construction of the emblems is as follows but not limited to:

-Die struck in solid brass

-Hand polished jeweler's finish

-Each emblem is hand made in a number of operations to achieve quality and appearance of fine jewelry

-As a final finish, all units are plated in decorative exterior Chrome Plating to maintain their mirror type appearance for years to come

-All emblems are supplied with an auto industry adhesive tape backing for secure application

Rich
CAR Motorsports

[texascorvette]

OK, time to update you on the Emblem Specifics prior to providing pictures on Friday night. The details on the construction of the emblems is as follows but not limited to:

-Die struck in solid brass

-Hand polished jeweler's finish

-Each emblem is hand made in a number of operations to achieve quality and appearance of fine jewelry

-As a final finish, all units are plated in decorative exterior Chrome Plating to maintain their mirror type appearance for years to come

-All emblems are supplied with an auto industry adhesive tape backing for secure application

Rich
CAR MotorsportsWhat are the chances of getting a brass set without the chrome plating?

[ctrlraven]

put me down for 2 (front and rear)

[whoskal]

OK, time to update you on the Emblem Specifics prior to providing pictures on Friday night. The details on the construction of the emblems is as follows but not limited to:

-Die struck in solid brass

-Hand polished jeweler's finish

-Each emblem is hand made in a number of operations to achieve quality and appearance of fine jewelry

-As a final finish, all units are plated in decorative exterior Chrome Plating to maintain their mirror type appearance for years to come

-All emblems are supplied with an auto industry adhesive tape backing for secure application

Rich
CAR Motorsports


My Friend, i almost shed a tear, that was one of the best sales pitches ive ever seen for a emblem:up:

Cant wait!!!!!

[ncmm]

oh yeah, can't wait, I'll need at least two. . .thank you Rich!

[Svashtar]

I'm there Rich! I have your hood insulator and S55 emblems and some other stuff, so will be sure to get one of these. I would get 2, but with Zack's beautiful chrome front grill only need the rear.

Now to just get the old one off with the spoiler blocking my access...

Thanks,

Norm

[sweetair]

I'm there Rich! I have your hood insulator and S55 emblems and some other stuff, so will be sure to get one of these. I would get 2, but with Zack's beautiful chrome front grill only need the rear.

Now to just get the old one off with the spoiler blocking my access...

Thanks,

NormNorm, I believe that there is no need to remove the existing badge. This one is just going to be placed over it. It couldn't be any easier. I'm looking forward to getting mine as well..

[sweetair]

Rich, You can count me in for two as well. I just ordered the insulators front and rear, inserts and a bunch of oil magnets. I would like to find out about the fender badges as well. Is that a carmotorsports item as well?? Let me know

[Hotrauder]

Rich called last night and these badges are going to be even better that we had imagined. He said pictures he hopes on Staurday the 10th. Not ready to order yet but they will be worth the wait.
:woohoo: :woohoo: CAR has put a huge amount of work and investment in these badges and they are going to be first class as is everything they do. NEW ITEM... Gods Heads fender protector covers and we will soon have a Marauder section on the web site. Hooorah Dennis:beer:

[BIGGDOGG]

Time for a "First Look" at the Prototype of the Marauder Godshead Emblem. The emblem in the attachments will be identical for both front and rear in appearance and in size(3.5 inches diameter). It will replace both of the emblems presently on your Marauder. As previously described, the triple plated Jeweler's mirror finish is fabulous. Hence the reflection shown in the picture. The actual production image will be even that much nicer. As an added bonus we will be offering Sail Panel and Door Panel versions of the same emblem. We expect to have ordering information posted by next Tuesday the 13th. Enjoy.

Rich
CAR Motorsports

[jimlam56]

Rich:
Looks like they will be worth the wait!
Put me down for 2.
Jim

[WildMarauder]

Rich, thanks for supporting our site. I hear the trunk emblem will be curved to fit the decklid. I'm definitely in. You mention fender and sail panel badges, but how about a steering wheel hub badge? I'd like to replace the flying M on the steering wheel with a God's head badge of equal size.

[Canadasvt]

Looks great. Excellent work!:banana2:

[Agent M79]

Bigger Pics!

[KilledKenny]

I thought they would also have the wording around the edge saying Mercury ot top half and Marauder on the bottom? Or was that just an idea that was later dropped?

[Hotrauder]

I like the fact that they don't say MERCURY and everything about the car shouts MARAUDER. Works for me, just one humble opinion. I'm thinking 4. I have Zacks Crome on DTR grill but want one on the rear under the spoiler, one on each fender location by the Marauder w/ flags and one on the steering wheel hub. What do you think? :cool: Dennis

[Alan CMS]

I thought they would also have the wording around the edge saying Mercury ot top half and Marauder on the bottom? Or was that just an idea that was later dropped?

It was dropped because it really detracted from the beautiful God's Head artwork and finish. It just didn't look right.

Alan

[Alan CMS]

Rich, thanks for supporting our site. I hear the trunk emblem will be curved to fit the decklid. I'm definitely in. You mention fender and sail panel badges, but how about a steering wheel hub badge? I'd like to replace the flying M on the steering wheel with a God's head badge of equal size.

The steering wheel badge you reference is also in production. Stay tuned for further details and information about this product.

Alan

[Alan CMS]

In addition to the upcoming God's Head Emblems, CAR Motorsports is announcing a special purchase on our Premium Quality High Performance Rotors and Brake Pads for the Mercury Marauder. These High Performance Rotors and Brake Pads replace your existing rotors and pads without any modifications or changes. In short, they fit and install the same as factory replacement rotors and pads. However, unlike the OEM replacements, these rotors and pads will significantly improve your braking and are impressive looking. On a 300ZX with CAR Motorsports cross-drilled and slotted rotors and pads, the owner experienced stopping distances that were one third shorter than with the OEM factory rotors and pads. Similar improvements were observed on another owner’s C5 Corvette. ffice:office" /><?xml:namespace prefix = o ns = "urn:schemas-microsoft-com /><o:p></o:p>
<FONT face=<font size=" /><o:p></o:p>
<FONT face="Times New Roman"><FONT size=3>CAR Motorsports rotors are manufactured in either Italy or Canada (recently, we found out that the OEM equipment rotors on the C5 Corvette were originally made in Brazil). Italian and Canadian rotors are widely known to be the two highest quality rotors available. The rotors are forged steel cores that are CNC machined in the USA to exacting standards using radius curve cut chamfers (as opposed to countersink cuts) to eliminate the edge commonly found on the countersink cut chamfers. With the radius curve cut, the edge on the surface of the hole is eliminated resulting in less stress build up and reducing the chances of surface checking or cracking. This smooth surface also makes the rotor more pad friendly by reducing the wear of the pad caused by the friction against a sharp edge.<o:p></o:p>
<FONT face="Times New Roman"><FONT size=3><o:p></o:p>
<FONT face="Times New Roman"><FONT size=3>The CAR Motorsports rotors offered in this Group Purchase are NICKEL plated. Most rotors are zinc plated. Nickel plating offers greater durability and a more spectacular, almost chrome-like finish. The nickel-plating also protects against rust formation on the rotors. <o:p></o:p>
<FONT face="Times New Roman"><FONT size=3><o:p></o:p>
<FONT face="Times New Roman"><FONT size=3>Our Street Plus Carbon and Graphite Metallic brake pads are specifically formulated to withstand high temperatures and resist fading. This hybrid compound is the perfect formulation for performance street and Autobahn driving, or hard stop and go situations where other brake pads would typically overheat. The pads feature an advance low dust formula and provide excellent durability, quick recovery, and resistance to fade compared to conventional brake pads.<o:p></o:p>
<FONT face="Times New Roman"><FONT size=3><o:p></o:p>
<FONT size=3><FONT face="Times New Roman">OPTIONS<FONT face="Times New Roman">: <o:p></o:p>
<FONT face="Times New Roman"><FONT size=3>Package A features <o:p></o:p>
<FONT face=Symbol><FONT size=3>· <FONT face="Times New Roman"><FONT size=3>FRONT and REAR cross-drilled and slotted rotors. These rotors will replace your OEM rotors without any additional modifications (including suspension changes) or changes (including different wheels); <o:p></o:p>
<FONT face=Symbol><FONT size=3>· <FONT face="Times New Roman"><FONT size=3>High performance carbon-graphite metallic FRONT and REAR brake pads that are designed to be highly resistant to heat and produce minimal dust;<o:p></o:p>
<FONT face=Symbol><FONT size=3>· <FONT size=3><FONT face="Times New Roman">NICKEL<FONT face="Times New Roman"> plating on the Front and Rear rotors. Most rotors are either Zinc plated or ceramic coated. Nickel plating is extremely durable and the higher luster and shine of Nickel results in a more stunning and noticeable appearance than Zinc plating; and <o:p></o:p>
<FONT face=Symbol><FONT size=3>· <FONT face="Times New Roman"><FONT size=3>all SHIPPING charges (CONUS) are included. <o:p></o:p>
<FONT face="Times New Roman"><FONT size=3><o:p></o:p>
<FONT face="Times New Roman"><FONT size=3>Package B features <o:p></o:p>
<FONT face=Symbol><FONT size=3>· <FONT face="Times New Roman"><FONT size=3>FRONT and REAR diamond cut and slotted rotors. These rotors will replace your OEM rotors without any additional modifications (including suspension changes) or changes (including different wheels); <o:p></o:p>
<FONT face=Symbol><FONT size=3>· <FONT face="Times New Roman"><FONT size=3>High performance carbon-graphite metallic FRONT and REAR brake pads that are designed to be highly resistant to heat and produce minimal dust.<o:p></o:p>
<FONT face=Symbol><FONT size=3>· <FONT size=3><FONT face="Times New Roman">NICKEL<FONT face="Times New Roman"> plating on the Front and Rear rotors. Most rotors are either Zinc plated or ceramic coated. Nickel plating is extremely durable and the higher luster and shine of Nickel results in a more stunning and noticeable appearance than Zinc plating; and<o:p></o:p>
<FONT face=Symbol><FONT size=3>· <FONT face="Times New Roman"><FONT size=3>all SHIPPING charges (CONUS) are included. <o:p></o:p>
<FONT face="Times New Roman"><FONT size=3><o:p></o:p>
<FONT face="Times New Roman"><FONT size=3><o:p></o:p>
<FONT face="Times New Roman"><FONT size=4>
<FONT face="Times New Roman"><FONT size=4>Pricing<FONT face="Times New Roman">: <FONT size=4>$750 for Package A or B.
<FONT face="Times New Roman">
<FONT face="Times New Roman" size=3>Attached are photos of the Nickel Plated GTO Rotors for a 2004 Pontiac GTO to show the appearance of the rotors and the finish.

[Hotrauder]

Sounds great Allen. How would I determine which option is best for me? :) Thanks. AND HOW DO WE ORDER? Dennis

[BIGGDOGG]

Bigger Pics!

I attempted to post bigger pics and the system would only accept smaller sizes. If you would like larger pics sent to you, simply send an email request to me at my corporate address: Rich@carmotorsports.com

Rich
CAR Motorsports

[MM03MOK]

I attempted to post bigger pics and the system would only accept smaller sizes. If you would like larger pics sent to you, simply send an email request to me at my corporate address: Rich@carmotorsports.com

Rich
CAR MotorsportsUpload them into the Gallery. It'll take 1280x960, then put the link in the post back to the Gallery.

[Shora]

Time for a "First Look" at the Prototype of the Marauder Godshead Emblem. The emblem in the attachments will be identical for both front and rear in appearance and in size(3.5 inches diameter). It will replace both of the emblems presently on your Marauder. As previously described, the triple plated Jeweler's mirror finish is fabulous. Hence the reflection shown in the picture. The actual production image will be even that much nicer. As an added bonus we will be offering Sail Panel and Door Panel versions of the same emblem. We expect to have ordering information posted by next Tuesday the 13th. Enjoy.

Rich
CAR Motorsports

I just hope that they don't take too long to produce because I want mine ASAP.:coolman:

[Rider90]

Beautiful work. Looking forward to larger pictures and some pictures on a Marauder.

[Svashtar]

Hi Rich,

These rotors are the same diameter as the factory units, correct? I am familiar with cross-drilled, but "diamond cut?" Is that just an appearance thing?

And sorry for the dumb question, but what's the sail panel? I'm trying to visualize where the new Godshead emblems would go on that.

Thanks!

Norm

[Hotrauder]

Hi Rich,

These rotors are the same diameter as the factory units, correct? I am familiar with cross-drilled, but "diamond cut?" Is that just an appearance thing?

And sorry for the dumb question, but what's the sail panel? I'm trying to visualize where the new Godshead emblems would go on that.

Thanks!

Norm

C pillar maybe? If so a cute idea not considered by me before. Maybe I need 8 or 10 of them.:eek: Dennis

[Donny Carlson]

This would be a nice compliment to a gods head emblem on the trunk lid. Take a look at this Impala SS, which has a sail panel emblem, and note the trunk lid bowtie has been replaced with a leaping impala emblem.

http://02ws6ta.cz28.com/96%20Impala%20SS/Imp%202.jpg

[Donny Carlson]

Car Motorsports will be at the Atlanta Marauder breakfast, Saturday the 17th. Rich emailed me these larger photos for you to examine:

http://www.mercurymarauder.net/showcase/files/1/1/3/6/GodsheadEmblem4.JPG

http://www.mercurymarauder.net/showcase/files/1/1/3/6/GodsheadEmblem3.JPG

[Alan CMS]

Sounds great Allen. How would I determine which option is best for me? :) Thanks. AND HOW DO WE ORDER? Dennis

I think its more of a preference thing. I personally prefer the Diamond cut and slotted. Others prefer the cross-drilled and slotted. Rich has these on his Corvette and can provide some additional reactions on how they perform. I can tell you that looks wise, they are second to none. Beautiful finish that looks almost like chrome. On a black car, it would be stellar. On the diamond cuts, I thought about painting the diamonds for even more dramatic appearance.

Just give us a call to order.

Thanks,

Alan

[Alan CMS]

Hi Rich,

These rotors are the same diameter as the factory units, correct? I am familiar with cross-drilled, but "diamond cut?" Is that just an appearance thing?

And sorry for the dumb question, but what's the sail panel? I'm trying to visualize where the new Godshead emblems would go on that.

Thanks!

Norm


Norm,

Yes, these rotors are designed and made to fit just like the factory rotors (size, clearance, etc.). The advantage is the materials, workmanship, design, etc.

The diamond cut is not just an appearance thing, but is also functional in that it helps reduce gas buildup between the pad and rotor from the heat produced by the friction of the pad against the rotor. I've attached photos of both.

The sail panel area is the rear C pillar area behind the rear doors.

Thanks,

Alan

[Alan CMS]

We haven't brought this up before, but one item we carry that everyone should have, regardless of whether you race or not and whether you buy from us or not (We sure hope you would buy from us because of our dedication to you and our customer service) is our various magnetic products for various hard wearing fluids (eg. Transmission, Oil, and Differential Fluids). I've included a link below for you to read about this product. I've got them on all my cars and you only need to use one and then cut open your oil filter to be convinced of its effectiveness.

Thanks,

Alan

http://www.carmotorsports.com/FilterMAG.htm

[Rider90]

Will these rotors rust? It wouldn't look to pretty to have the inside slots of the rotors rusted..

Thanks

[Alan CMS]

Will these rotors rust? It wouldn't look to pretty to have the inside slots of the rotors rusted..

Thanks

The only surface that can possibly rust is the area contacted by the pad. This is due to the fact that the Nickel plating will and should be worn off by the pads for direct contact with the rotor. BTW, during this process there will be some squeaking and the brakes will grab like holy hell at slow roll. Because the pads do not contact the slotted area or the diamond cut area or the cross drilled holes, those also will not rust. Maybe Rich can take photos of the one's on his vette and post for everyone to see. They've been on the car for a few months now and would certainly have rusted given all the rainy weather we've had here.

Alan

[Marauder2005]

Those gods heads look AWSOME!!! When will they be avalible to order?

Is there a phone # to call and order? Thanks, and sorry if this has been

posted a million and one times.....

[merc6]

Theres been multiple debates on many forums with drilled rotors. Are these "More likely" to be suseptable to hair line cracks at or near the holes? Also what pads give off gas?

[Hotrauder]

I think its more of a preference thing. I personally prefer the Diamond cut and slotted. Others prefer the cross-drilled and slotted. Rich has these on his Corvette and can provide some additional reactions on how they perform. I can tell you that looks wise, they are second to none. Beautiful finish that looks almost like chrome. On a black car, it would be stellar. On the diamond cuts, I thought about painting the diamonds for even more dramatic appearance.

Just give us a call to order.

Thanks,

Alan

Alan, I apologize that I am to stupid to recognize that I was misspelling your name. I will make it up to you by buying STUFF. Dennis:depress:

[watts428]

I'll be wanting some for mine!! Anything for the steering wheel?

[seans]

[quote=Alan CMS]Norm,

Yes, these rotors are designed and made to fit just like the factory rotors (size, clearance, etc.). The advantage is the materials, workmanship, design, etc.

I've been considering this mod for a long time but I drive my car year round. Will these rotors be good to use if I drive in the snow a lot?

Also, I like your pricing but will you be offering a package deal if we buy two of the gods head emblems as well as one of the rotor packages? Thanks.

[Svashtar]

Norm,

Yes, these rotors are designed and made to fit just like the factory rotors (size, clearance, etc.). The advantage is the materials, workmanship, design, etc.

The diamond cut is not just an appearance thing, but is also functional in that it helps reduce gas buildup between the pad and rotor from the heat produced by the friction of the pad against the rotor. I've attached photos of both.

The sail panel area is the rear C pillar area behind the rear doors.

Thanks,

Alan

Thanks very much for the info Alan. These are beautiful, and anything that slows me down faster works for me. I'm going to have to wait until the new year to get the bread together, but this is on my to buy list for sure.

I have a stick-on Godshead steering wheel badge that I found out about online here that looks much better than the factor emblem, but will be glad to look at yours as well.

Someone mentioned Godsheads emblems next to the MM fender badges Marty organized for us, but I think that might be a little too much badging on the fender. I'll have to see how it looks.

I'm in for a rear badge for sure and will be glad to take a look at the others.

I have a filtermag from CM that seems to be doing a good job weeding out the "fuzz" in the oil, but did not know you made one for the tranny.

Thanks as always for the good info.

Oh, Rich was nice enough to call and leave a message that a embroidered "Marauder" fender blanket I ordered last month is shipping now. He said it turned out great, so it sounds like it will set the car off well; just the thing if you ever show off the car, and in retrospect I probably should have snagged a pair...!

Thanks,

Norm

[BIGGDOGG]

Donny,

Could you send me an email at Rich@carmotorsports.com so that I may reply with another picture of the prototype emblem installed in a Marauder Grille. You did a fine job posting the other one. Everyone remember that these pictures only represent prototypes, the actual production emblems will be that much nicer and the fit exact.

Thank you, Rich
CAR Motorsports

[Donny Carlson]

Donny,

Could you send me an email at Rich@carmotorsports.com so that I may reply with another picture of the prototype emblem installed in a Marauder Grille. You did a fine job posting the other one. Everyone remember that these pictures only represent prototypes, the actual production emblems will be that much nicer and the fit exact.

Thank you, Rich
CAR Motorsports

Email sent ;)

[Marauder2005]

Donny,

Could you send me an email at Rich@carmotorsports.com so that I may reply with another picture of the prototype emblem installed in a Marauder Grille. You did a fine job posting the other one. Everyone remember that these pictures only represent prototypes, the actual production emblems will be that much nicer and the fit exact.

Thank you, Rich
CAR Motorsports

Oh the suspence is to much to handle. Can't wait, thanks for taking

your time to make the perfect God :coolman:

[ncmm]

when can we order?! thanks, looks great!!

[Directedby]

I have these rotors - cross drilled/slotted with Hawk pads.

They are OK, not great.

I got maybe a 5% increase in braking.

What I don't like is they squeak when hot. I hoped the squeaking would go away after a few thousand miles but I now have nearly 10,000 miles on rotors and when they squeak, it drives me batty.

As for rust, yes, they rust. They are Nickel plated, but that does not stop the rust.





Norm,

Yes, these rotors are designed and made to fit just like the factory rotors (size, clearance, etc.). The advantage is the materials, workmanship, design, etc.

The diamond cut is not just an appearance thing, but is also functional in that it helps reduce gas buildup between the pad and rotor from the heat produced by the friction of the pad against the rotor. I've attached photos of both.

The sail panel area is the rear C pillar area behind the rear doors.

Thanks,

Alan

[BIGGDOGG]

We have the Nickel Plated Rotors on five(5) cars and no rust at all. As for the squeaks, one can expect that for the first 1000 to 1500 miles then no excess noise at all. That is when using our High Performance Carbon Graphite Metallic Street Pad, it is a great pad for cold performance as well as street/strip. Most of us drive our cars under relatively cool brake conditions, especially this time of year in most states. I suspect the Hawk Pad you are using is the High Speed Performance Pad, it is very good in a racing application at high speeds/high heat but as you are hearing, noisy in street application. We sell the Hawk Pad as well, primarily for those vehicles involved with track racing. I see a Marauder with the stock high shine wheels and I see high shine Nickel Plated Rotors matching the look for a seamlessly integrated appearance. It has the same visual effect on my Company C5 Corvette, and the brakes perform significantly better than stock with the High Performance Street Pads.

Rich
CAR Motorsports

[BIGGDOGG]

For those that are following this thread for the Gods Head Emblem Production, you will find the most up to date information at the Thread Link below:

http://www.mercurymarauder.net/forums/showthread.php?t=23356

Rich
CAR Motorsports