Gotta Wheel Question

[STLR FN]

In my other post:

http://www.mercurymarauder.net/forums/showthread.php?p=283484#post28 3484

I found a set of wheels I like that look similar to the "prototype wheels" Question is, since they list a 18X9 with a 25mm offset and a 6" backside will these stick out or rub on the inside?

http://www.americanracing.com/wheels/details.asp?wheelid=154&name=Rebel%20Chrome&style=699&desc=1-piece%20chrome%20plated%20allo y&section=P

The only other ones I like are these:

http://www.americanracing.com/wheels/details.asp?wheelid=147&name=Casino%20Chrome&style=683&desc=1-piece%20chrome%20plated%20allo y&section=P

[BK_GrandMarquis]

In my other post:

http://www.mercurymarauder.net/forums/showthread.php?p=283484#post28 3484

I found a set of wheels I like that look similar to the "prototype wheels" Question is, since they list a 18X9 with a 25mm offset and a 6" backside will these stick out or rub on the inside?

http://www.americanracing.com/wheels/details.asp?wheelid=154&name=Rebel%20Chrome&style=699&desc=1-piece%20chrome%20plated%20allo y&section=P

The only other ones I like are these:

http://www.americanracing.com/wheels/details.asp?wheelid=147&name=Casino%20Chrome&style=683&desc=1-piece%20chrome%20plated%20allo y&section=P


The lower the offset, the more it would stick out. Marauders are supposed to have a 50 offset. In conversion, 25mm is supposed to be just short of 1". This means the wheel would stick out that much more than it is now.

[AzMarauder]

In my other post:

http://www.mercurymarauder.net/forums/showthread.php?p=283484#post28 3484

I found a set of wheels I like that look similar to the "prototype wheels" Question is, since they list a 18X9 with a 25mm offset and a 6" backside will these stick out or rub on the inside?

http://www.americanracing.com/wheels/details.asp?wheelid=154&name=Rebel%20Chrome&style=699&desc=1-piece%20chrome%20plated%20allo y&section=P

The only other ones I like are these:

http://www.americanracing.com/wheels/details.asp?wheelid=147&name=Casino%20Chrome&style=683&desc=1-piece%20chrome%20plated%20allo y&section=P
Each person has their own opinion on what looks good. I went after a set of ROH Drift wheels. I did try an ROH with a +35 and didn't like the look at all. So I had picked an 18 x 8 +49 ROH.. and I will have the rear ones widened to get the width I need. (since the ROH wheels in the wider width were lower offset and stuck out too much).

[Big House]

I think the 18X10 with the +41 offset will work...but I think that will depend on where they put the two inches in relation to our whees. I am going with an 18 X 9 in the rear with a +38 offset and according to a number of different calculators with stock wheels I am pushing out about .9 inches...and looking at the rears from the top we got that little to give.

[STLR FN]

Got my answer:

http://www.mercurymarauder.net/forums/showthread.php?t=20419

Last post look at pic.

I don't know if it's the black car or the angle of the pic, but I'm not liking the look to much.