PDA

View Full Version : 8 Rib set up project motor 4


Dennis Reinhart
10-13-2005, 01:09 PM
Here are some more pictures of another build up this is a 03 Cobra block with steel crank manley rods diamond racing pistons ARP faseners and head studs, fully ported heads, now this as you can see is a 8 rib set up, when we did the first one it was faily expensive now the AC clutch can be but faily cheap, and the rest is Ford parts the idlers and the power steering pulley and I also change the front timing cover to a 98 cobra it has a much better belt tentioner than the Marauder.
This car will have Kooks they are ceramic coated with 3" colectors but we are leaving the Short headers on till we can get the car to Busters for a custom 3" exhaust.

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1129244121-8ribjt.jpg

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1129244361-frontjt.jpg

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1129244536-top8rib.jpg

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1129244738-side8rib.jpg

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1129244820-rearcrossover.jpg

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1129244901-fuelpsens.jpg
klmore
10-13-2005, 02:35 PM
Looks good Dennis.
jgc61sr2002
10-13-2005, 04:19 PM
Nice job. :up: Sure looks great. :D
juno
10-14-2005, 06:37 AM
Dennis,


So the stock intake/throttlebodies bolt right on to the Snake block?
Dennis Reinhart
10-14-2005, 07:01 AM
Dennis,


So the stock intake/throttlebodies bolt right on to the Snake block?Yes every thing on a Maruder block bolts up to the 03 Cobra block
Bradley G
10-14-2005, 07:06 AM
WHoo Doggie!

That's real purty, thank for the Pic's Mr Rienhart!
Dennis Reinhart
10-14-2005, 12:29 PM
Here are some pictures with the SC removed so you see the differences between the timing cover and belt tentioner set up


http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1129317938-DSC00487.JPG
http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1129318094-DSC00486.JPG
martyo
10-14-2005, 01:26 PM
Nice main crank pulley! Where'd ya get that?
Dennis Reinhart
10-14-2005, 01:29 PM
The owner bought it and it is a thing of beauty I think you have its twin
fastblackmerc
10-14-2005, 02:30 PM
The owner bought it and it is a thing of beauty I think you have its twin
Nice job!!!
martyo
10-14-2005, 02:39 PM
The owner bought it and it is a thing of beauty I think you have its twin

Dennis: I am starting to worry about us. We think pulleys are beautiful. Personally, I get a woody when I look at them! :P
Dennis Reinhart
10-20-2005, 04:49 PM
Well here is a update, on the 8 rib setup with built motor, this is a awsome setup, built motor with Vortech JT Trim 60 pound inj SCT B2800 maf twin focus fuel pumps witha KBBAP with a dash 8 line CPR fuel rails, 410 gears built trans by Art Car upgraded PI conv with 3500 stall, the car is 90% done we are waiting on the 4" power pipe and the Race by pass

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1129851277-DSC00135.JPG

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1129851540-DSC00134.JPG

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1129851708-DSC00133.JPG

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1129851933-DSC00132.JPG
cyclone03
10-20-2005, 06:53 PM
Dennis: I am starting to worry about us. We think pulleys are beautiful. Personally, I get a woody when I look at them! :P


I hear you like you'r pulley backwards. :)


With you medical problems,from TAF's post, you better stay away from pullin' for awhile. :D
TAF
10-21-2005, 03:07 AM
I hear you like you'r pulley backwards. :)
True 'dat^^^... which would actually make Marty...uh...a "pushy"....
Todd
10-21-2005, 04:26 AM
Looks great Dennis...!!!!