jdando
06-30-2006, 04:47 PM
Just thought I would pass along my experience with the Zaino "system". Today was the day I got around to doing my spring cleaning. My car is a 2003 300b, with 19,000 miles and one and a half MN winters. Daily driver here in MN and lately it has been spending lots of time at the airport parking garage (can you say, dust, jet fuel residue, ooze from the parking ramp :mad: ).
Here are the steps I took;
Wash with Dawn dish soap
Clay bar
ZPC
Z5
Z6
Z2
Z6
I applied the ZPC with the Porter Cable 7424, everything else went on by hand. I took the Z2 and Z5 off by machine.
The ZPC is the new mild abrasive swirl remover. My car had some minor swirls so I figured it was a good thing to try.
http://www.mercurymarauder.net/showcase/files/3/1/0/2/zpc.jpg
I think the ZPC is great! I was very gently, and in retrospect I could have put a lot more pressure on the Porter Cable and removed more of some scratches I had.
Scratch before
http://www.mercurymarauder.net/showcase/files/3/1/0/2/passrearquarterbefore.jpg
Scratch after
http://www.mercurymarauder.net/showcase/files/3/1/0/2/rearquarterscratchafter.jpg
I also put my Z5 on too thick and had some uneven shine. Luckily it evened out after the Z2 and Z6.
The reflection off the car is amazing! Here is a shot of the rear quarter panel. My poor little digicam was having lots of issues focusing. (Ignore ugly fat old guy with camera in the picture:rolleyes:)
http://www.mercurymarauder.net/showcase/files/3/1/0/2/rearquarterreflect.jpg
Shot of my hood. The bike and garage door opener are the reflection.
http://www.mercurymarauder.net/showcase/files/3/1/0/2/hoodreflectionafter.jpg
I started the process at about 10:30 am and finished about 3:30pm. Only about a half hour for lunch in there.
All done
http://www.mercurymarauder.net/showcase/files/3/1/0/2/alldone.jpg
Another satisfied Zaino customer.
jeremy
Here are the steps I took;
Wash with Dawn dish soap
Clay bar
ZPC
Z5
Z6
Z2
Z6
I applied the ZPC with the Porter Cable 7424, everything else went on by hand. I took the Z2 and Z5 off by machine.
The ZPC is the new mild abrasive swirl remover. My car had some minor swirls so I figured it was a good thing to try.
http://www.mercurymarauder.net/showcase/files/3/1/0/2/zpc.jpg
I think the ZPC is great! I was very gently, and in retrospect I could have put a lot more pressure on the Porter Cable and removed more of some scratches I had.
Scratch before
http://www.mercurymarauder.net/showcase/files/3/1/0/2/passrearquarterbefore.jpg
Scratch after
http://www.mercurymarauder.net/showcase/files/3/1/0/2/rearquarterscratchafter.jpg
I also put my Z5 on too thick and had some uneven shine. Luckily it evened out after the Z2 and Z6.
The reflection off the car is amazing! Here is a shot of the rear quarter panel. My poor little digicam was having lots of issues focusing. (Ignore ugly fat old guy with camera in the picture:rolleyes:)
http://www.mercurymarauder.net/showcase/files/3/1/0/2/rearquarterreflect.jpg
Shot of my hood. The bike and garage door opener are the reflection.
http://www.mercurymarauder.net/showcase/files/3/1/0/2/hoodreflectionafter.jpg
I started the process at about 10:30 am and finished about 3:30pm. Only about a half hour for lunch in there.
All done
http://www.mercurymarauder.net/showcase/files/3/1/0/2/alldone.jpg
Another satisfied Zaino customer.
jeremy