New Rotors & Pads For Front

[Dan19063]

Looking for some suggestions for new rotors for my o4MM. I was thinking of just the fronts for right now due to a nice shudder on braking. I think OEM sucks cause the car only has 20k on it and I don't smash on the brakes. I was considering the Pro Stop Slotted and Dimpled Brake Rotors any suggestions other than that? And what are good pads for street driving?

[BLACKMARAUDER04]

I have 44000 miles on my 04. I drive hiils and carry heavy loads.
My breaks still have 50% lif e left.

[scoutrjp]

Check out Reinhart got a set of EBC from him last month- price is right:)

[fastblackmerc]

Check out Reinhart got a set of EBC from him last month- price is right:)
^^^ What he said ^^^^

[Bradley G]

I went with Baer OEM size and severe duty Ford pads.
No problems so far.

[alarmguy]

Reinhart has the EBC rotors and pads on sale for $460 as part of his September specials. That's a great price. I've been very happy with mine for 6,000 miles now.

[darkvader1]

Ebc are good! highly good upgrade ,I run those with performance friction pads/ carbon metallic.

[ctrlraven]

EBC's are junk had them and the rotors wrapped not once but twice, even their Green Stuff pads were too hard for their slotted/dimpled sport rotors.

I went back to OEM rotors/pads and much happier. Try having your brake fluid flushed, that may get rid of the shudder.

[Cobra25]

Napa Drilled and slotted rotors. You can get front & rear rotors with a complete set of cermic pad 's for around $600 or so. Their are older threads with the part #'s listed and exact prices. I've had them for a few years with no problems and they stop alot better than stock.

[burt ragio]

Oem pads & rotors are a good st up for our cars if your not autocross racing. Many members have 70,000 miles plus on the original equipment. In a few weeks I will be changing over to Comand rotors & Hawk HPS pads. The rotors are used on most pursute vehicles. They come with a life time warantee. hte Hawk pads offer 20% more stopping power. That combo with stainless steel brake lines is all I need for now.

[RoyLPita]

I have NAPA Ceramix Pads won stock rotors. I will be upgrading to Powerslots soon.