PDA

View Full Version : In the garage


carfixer
10-30-2006, 06:36 PM
This weekend "in the garage", we had a little project. Tallboy, Shakes_26 and I installed a polished twin screw SC on a 2006 350Z Roadster. Pretty cool little car!
http://www.mercurymarauder.net/showcase/files/1/1/9/0/Stillen09.jpg

Look at that blower peeking out at you.
http://www.mercurymarauder.net/showcase/files/1/1/9/0/Stillen08.jpg
Hotrauder
10-30-2006, 06:58 PM
Wow, that is a great looking piece. what kind of performance boost are they getting with the twin screw? Huge intercooler heat exchanger! That Z must be a bomb. Nice to see the skunk works in operation. Dennis
bigslim
10-30-2006, 07:35 PM
I see a name on it of one that is not a vendor.:shake:
shakes_26
10-30-2006, 07:48 PM
Claude here is the proper posting

http://www.mercurymarauder.net/showcase/files/2/6/2/8/stillen_corrected04copy.jpg
DEFYANT
10-30-2006, 07:49 PM
I see a name on it of one that is not a vendor.:shake:

LOL, Now... Slim, *if* they do a S/C on your 350Z, there could be trouble.

A few guys workin on a car in their garage and showing that off should not be a problem. Or is it? :confused:
carfixer
10-30-2006, 07:51 PM
Thanks Slim, Marc and Charle, I fixed my original post. :)
Tallboy
10-30-2006, 07:58 PM
Thanks Slim, Marc and Charle, I fixed my original post. :)

You, sir, should be ashamed of yourself. :D

Ding! Fries are done! :food:
shakes_26
10-30-2006, 08:12 PM
Sorry Claude I corrected the post correction
bigslim
10-30-2006, 08:48 PM
Now this is all too funny!!:lol:
carfixer
10-30-2006, 08:52 PM
Of course, the best part of the installation is hanging with 2 of my best friends in the garage on a Sunday.

http://www.mercurymarauder.net/showcase/files/1/1/9/0/Stillen11.jpg

http://www.mercurymarauder.net/showcase/files/1/1/9/0/Stillen10.jpg
sweetair
10-30-2006, 09:27 PM
This now at a whole NEW level that is really funny. LOL. Good job guys. Looks good. That wasn't tallboy wearing tape on his eyes during the install was it? LOL
Raudermaster
10-30-2006, 09:32 PM
LOL. Wow, that little thing must cook! A guy at work at a 350Z Nismo Z-Tuned, and that is one, fast little machine. I can only imagine what that thing can do. How much boost is it pushing?
Tallboy
10-30-2006, 09:33 PM
This now at a whole NEW level that is really funny. LOL. Good job guys. Looks good. That wasn't tallboy wearing tape on his eyes during the install was it? LOL

I may, or may not, be pictured above, sitting down, straightening a clamp... :dunno:

The man in the white shirt might be Shakes_26. Then again, maybe it isn't...:neener:
RCSignals
10-31-2006, 12:50 AM
LOL, Now... Slim, *if* they do a S/C on your 350Z, there could be trouble.

A few guys workin on a car in their garage and showing that off should not be a problem. Or is it? :confused:

No, it isn't a problem I'm sure. Pretty sure Slim knows too.
SergntMac
10-31-2006, 04:27 AM
I enjoyed the humor, thanks, Slim. Congrats on the build, looks like y'all had some fun with the install, and with the posts. I love it all.
shakes_26
10-31-2006, 06:32 AM
That wasn't tallboy wearing tape on his eyes during the install was it? LOL

It may have been, he's always sitting down on the job.

Oh yeah we tape his eyes shut, he works better that way, less distractions, its like he is one of them there Ididit Savants:D
Tallboy
10-31-2006, 06:36 AM
LOL. Wow, that little thing must cook! A guy at work at a 350Z Nismo Z-Tuned, and that is one, fast little machine. I can only imagine what that thing can do. How much boost is it pushing?


Tough to say, as this kit did not include a boost gauge.

This is the Stillen "Stage Three" kit, and I think it pushes around 7PSI.
DEW34
10-31-2006, 02:09 PM
Claude its good to see yall out and about .
mike :burnout:
Hotrauder
10-31-2006, 02:13 PM
I may, or may not, be pictured above, sitting down, straightening a clamp... :dunno:

The man in the white shirt might be Shakes_26. Then again, maybe it isn't...:neener:

Chuck, I am pretty sure that is Marc and frankly...he has never looked better. Dennis:neener:
DEFYANT
10-31-2006, 04:25 PM
Tough to say, as this kit did not include a boost gauge.

This is the Stillen "Stage Three" kit, and I think it pushes around 7PSI.


I thought all supercharger kits included a boost guage :D ..
TopCat
10-31-2006, 05:34 PM
I thought all supercharger kits included a boost guage :D ..

I thought so too.
tmac1337
11-02-2006, 12:43 PM
http://www.mercurymarauder.net/showcase/files/1/8/3/5/donkeys.JPG

In the Paddock
Cobra25
11-02-2006, 12:58 PM
http://www.mercurymarauder.net/showcase/files/1/8/3/5/donkeys.JPG

In the Paddock " Humor Is A Good Thing "
DEFYANT
11-02-2006, 01:07 PM
http://www.mineferieminder.dk/The%20Pros%20and%20Cons%20of%2 0Hitchhiking.jpg
TopCat
11-02-2006, 03:12 PM
http://www.mercurymarauder.net/showcase/files/1/8/3/5/donkeys.JPG

In the Paddock

Under the sink
maraudernkc
11-02-2006, 06:42 PM
Carfiixer, very nice, You should become a vendor on mm.net and support the site.


This weekend "in the garage", we had a little project. Tallboy, Shakes_26 and I installed a polished twin screw SC on a 2006 350Z Roadster. Pretty cool little car!
http://www.mercurymarauder.net/showcase/files/1/1/9/0/Stillen09.jpg

Look at that blower peeking out at you.
http://www.mercurymarauder.net/showcase/files/1/1/9/0/Stillen08.jpg
Hotrauder
11-02-2006, 06:50 PM
Carfiixer, very nice, You should become a vendor on mm.net and support the site.

Man, get a grip, take a breath AND a pill. Please. Thanks . Dennis
maraudernkc
11-02-2006, 09:19 PM
Dennis, I have a good grip and I don't need a pill.


Man, get a grip, take a breath AND a pill. Please. Thanks . Dennis
Motorhead350
11-02-2006, 09:41 PM
Cool. Wonder what that car runs. I don't care what you drive as long as it's fast.
shakes_26
11-02-2006, 11:22 PM
Carfiixer, very nice, You should become a vendor on mm.net and support the site.

Greg,

since your policing the site for vendor compliance (kudos), please take a look at this thread as well, link (http://www.mercurymarauder.net/forums/showthread.php?t=31503&highlight=mobil), after all shouldn't be any exceptions.

Thanks,

The huddled masses.
SergntMac
11-03-2006, 03:48 AM
Gentlemen...

The topic of "vendor status" is for the owners to decide, not you, and we have decided.

Chuck (Tallboy) and Claude (carfixer) are supporting members of the MM.Net, and have a "hobby vendor" status among us. There is no violation of any rule here.

Several owners have posted their comments in this thread, myself included, and that should be a clear message to you all that this thread has our approval.

Further disruption of this (or any) thread or posts by anyone without the express authority of the owners will be dealt with.

As much as it disappoints me, there is only one course of action here, my apologies to Claude, Chuck and Shakes26. Guys, next time you have some fun like this, please share it with us?