Remove Shift Knob

[Architect]

Is it possible to remove and change the shift knob...
It appears that you would have to change out the whole shifter arm down to the pivot point.
Architect

[Zack]

Simply slide the lower portion of the shifter arm downward.
It will expose 2 torx screws.

[Drock96Marquis]

After removing the screws as Zack mentioned, don't forget to disconnect the o/d off wiring before you yank it off (it gets tucked up into the shift knob)

[Architect]

Simply slide the lower portion of the shifter arm downward.
It will expose 2 torx screws.
So simple...but so hard to find without good information....:D
Thanks for the help:2thumbs:
Architect

[RoyLPita]

This also helps correct a loose knob, too. I'll use this info to fix a current owner's MM.