OK Dave...

[Bonedriver]

If your not going to brag... I will for ya!

Dave Weber pulled 420 RWHP with like 460 TQ at our dyno day this passed saturday in his S/C 2003 300a.

Way to go brother!:D


(I pulled a measly 256 RWHP and like 269 TQ with my 02 LX Sport :rolleyes: )

[KillJoy]

NICE Numbers!!! Especiall that TQ!

Nice numbers for a LX too ;)

KillJoy

[JMan]

(I pulled a measly 256 RWHP and like 269 TQ with my 02 LX Sport :rolleyes: )

Dude,
What did you do to a Sport to get those numbers? I presume at a very high RPM no less. A graph would be awesome. 256 is crankin', bigtime. Quarter-mile times please?

J

[MarauderMark]

Dave Weber pulled 420 RWHP with like 460 TQ in his S/C 2003 300a.


Nice:up:...

[Marauder386]

Well, I try to stay off the radar...LoL...Thanks Tom for the plug...:o
The numbers showed that after a year on this install, they actually went up !
The DR dyno pull in Jan '06 showed 413 hp and ( I fergit ) for torque. Now the numbers are a 425hp and 462 for torque...still room to grow ! :D Tom has his CV prepped for a S/C install...bulletproof internals with 8.5:1 pistons..lotsa good solid stuff...a nice, evil,awesomely deep rumble at idle too...its sweet...


:cool:

[Vortex]

A lot of power for a 4.6, for damn sure.

[Marauder386]

A lot of power for a 4.6, for damn sure.
Thank you all for the kind words ...I am hoping to go further...

:cool:

[Bonedriver]

Patriot Stage II heads
Patriot Cams
Diamond pistons - dished (8.5:1 compression) and notched for a 2v
03 Cobra Rods
Cobra Crank
Block is basically blueprinted
a slew of other small mods...

I'm saving for the 9 PSI AED twin screw kit...

Oh... 256.7 @ 5200 RPMs

[JMan]

Patriot Stage II heads
Patriot Cams
Diamond pistons - dished (8.5:1 compression) and notched for a 2v
03 Cobra Rods
Cobra Crank
Block is basically blueprinted
a slew of other small mods...

I'm saving for the 9 PSI AED twin screw kit...

Oh... 256.7 @ 5200 RPMs

Thanks, very impressive! I expected the torque to be "off the chart". That's why I suspected a higher rpm level. Sounds like that thing is blaring without the AED. God help the ricers when that comes to bear!

Good luck and keep us posted!

JMan

[Raudermaster]

Nice numbers! What do you have in your MM?



Dude,
What did you do to a Sport to get those numbers? J

Member Tony The Brit on CVN has 258hp, and 301tq with his '03 LXS. Who knows though, maybe that was on a 'Stang dyno. These are his listed mods in his sig:
Marauder Airbox/MAF + 04 police zip tube.
ADTR Ported Plenum + BBK 70mm Throttle Body.
SLP Underdrives.
Kooks long-tube headers & X-pipe.
High-flow cats (Very!).
Magnaflow stainless mufflers with Custom 2.5" piping.
SCT Pro Racer 3.0 software & Xcal2.
NGK Iridium Plugs.
BC-Automotive performance transmission.
Forced-lube tailshaft housing mod.
3,500rpm stall TC also from BC-Automotive.
Aluminum-matrix driveshaft.
Ford Racing Posi with 3.27 final drive.
Police HD front lower control arms.
Metco rear Control Arms & Watts Linkage.
Addco Sway Bars.
Marauder OEM shocks.
Marauder 18" wheels.
255/45-18 Kumho ASX tires.
Cruiser's Rest armrest.
HID headlamps from ADTR.

[Marauder386]

...Vortech air to water,PHP intake spacer,Stallion TQ,Level 2 transmission,Dynotech MMX driveshaft,FRP 4.10s, DR tuning...KVR brakes, FRP dual mode mufflers...going gauge crazy soon...

:cool: