View Full Version : tach wire
superford3
04-12-2007, 03:57 PM
anybody know which wire off the coils is the tach signal wire
Raudermaster
04-12-2007, 04:17 PM
Why? You have a tach. Not sure if it changed, but in my '95 CV I had to splice into the 2nd wire furthest away from the firewall on the driver side. Hence where the DIS module is. I believe it was a vanilla-ish colored wire with an orange stripe.
superford3
04-12-2007, 04:34 PM
im installing the window switch for the nitrous
HwyCruiser
04-12-2007, 04:53 PM
I wired my Dynojet Wideband Commander's RPM hookup to the #4 coil pack switched signal at the firewall harness (pin #3). Click for pic. (http://s12.photobucket.com/albums/a203/jdomino/wbc/WBC_coprpm.jpg)
BAD MERC
04-12-2007, 04:54 PM
Yep, go to ANY injector or coil and get the wire THAT IS NOT red or red/light green.
MENINBLK
04-12-2007, 08:06 PM
I wired my Dynojet Wideband Commander's RPM hookup to the #4 coil pack switched signal at the firewall harness (pin #3). Click for pic. (http://s12.photobucket.com/albums/a203/jdomino/wbc/WBC_coprpm.jpg)
hmmm....
Your steering knuckle looks different than mine.
What year is your Marauder ?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.