PDA

View Full Version : flowmasters onto stock exhaust


Grifter
06-04-2007, 09:47 AM
I have a set of 2.5" flowmasters.
what reducers do i need? how much extra pipe for added length?

I think i need 2"-2.5" reducers and 2.25"-2.5" reducers.
do i need 2" ID or OD to mate to the stock H pipe? same question goes for the catback. 2.25" ID or OD?
Raudermaster
06-04-2007, 09:58 AM
I believe you want OD pipe to mate to the mufflers.
TheDonk
06-04-2007, 03:44 PM
This may answer your question.
Stock system pipes -OD measures
Manifold to CAT1 = 2 1/4 "
CAT1 to CAT2 = 2 1/2 "
H pipe = 2 " all
Muffler to Tips = 2 1/4 "
CRUZTAKER
06-04-2007, 07:02 PM
Bingo...nothing a corner Midas can't handle.
Grifter
06-05-2007, 06:30 AM
why pay someone to do something i can easily accomplish myself? I'm one of thseo people who likes to do their own stuff. Thats half the fun to me.

Thanks Donk. Thats the info i wanted.
Raudermaster
06-05-2007, 07:57 PM
I can't recall if there is a slight bend in the extended mid pipes though. Do you have access to a pipe bender?
CRUZTAKER
06-05-2007, 08:13 PM
why pay someone to do something i can easily accomplish myself? I'm one of thseo people who likes to do their own stuff. Thats half the fun to me.

Thanks Donk. Thats the info i wanted.

I wasn't trying to insinuate you pay someone else, but more so lead you to believe it could be done quite easily.
I didn't have the specs, but wanted to reply regardless.

Good luck with the install.;)
Grifter
06-06-2007, 04:39 AM
No problem Cruztaker.
I did install them, it went pretty smoothly. I didnt need a pipe bender as i cut the midpipe just before the factory clamp, allowing me to use the short straight area just after the bends.
finster101
06-06-2007, 04:48 AM
How do you like the sound? Is anything else been changed on your system. I have been thinking about doing something but as this is my driver I don't know if I want the noise. Any comments anybody? How loud is it in the car?
Grifter
06-06-2007, 07:49 AM
mine is stock except for the Flows and delete tips.
It sounds pretty deep and good. Outside the car its not too loud for me. Inside, i need to clean up some welds, i think i have a leak thats causing some 1500rpm drone. at 70 you can hardly hear them in the car at all.