Been searching

[badabotha]

I don't know where it went or how it came loose......but the plastic molding/trim that runs between the wheel wells and along the underside of the front and rear door on the passenger side is GONE.:help: I was giving her a bath and noticed I could see the frame. I'm looking for a part number and where I can order a new one.
Thanks

[Raudermaster]

That's an odd piece to lose lol. Not sure of the part number. Don't CV/GM's have the same thing, and too are black? Probably be cheaper to hit up a junk yard and pull one off.

[RoyLPita]

+1 for the idea stated above. This is because everything that needs to go with it costs extra and is also ala carte.

[Zack]

They are like $60 new at the dealer.
I had to replace the one on another MM.

[badabotha]

$60 isn't too bad to replace it. I'll go poke around in a few junk yards first. Thanks for the quick response fellas.

:beer:

[JMan]

$60 isn't too bad to replace it. I'll go poke around in a few junk yards first. Thanks for the quick response fellas.

:beer:

If you're talking about that long plastic rocker cover, Crown Victorias don't have it (them). It is painted metal on the Vics. I was quite shocked to find the Marauder's were plastic.

J

[cyclopsram]

All my Crown Victorias..(5) have the black plastic rocker panels... and my Grand Marquis, Too...just held on with little black plastic push-in fasteners. Including P71s....Have never lost one in 1,000,000 miles.. but I don't go over 70 mph....or 4 wheeling...

[JMan]

If you're talking about that long plastic rocker cover, Crown Victorias don't have it (them). It is painted metal on the Vics. I was quite shocked to find the Marauder's were plastic.

J


All my Crown Victorias..(5) have the black plastic rocker panels... and my Grand Marquis, Too...just held on with little black plastic push-in fasteners. Including P71s....Have never lost one in 1,000,000 miles.. but I don't go over 70 mph....or 4 wheeling...

Okay, for the record, I am a bumdass! Yes infact, they are plastic on the Vic. All this time I thought they were metal. There's a very good likelyhood you could find them in a junkyard and wouldn't need much in the way of tools to remove!

Best luck,

J