Who makes this rim???

[Bowman9]

I spotted this rim on American Muscles website, (it is not one of theirs). It is a customer submitted image showing off the Roush hood scoop.
If you notice it is a deepdish bullitt style with what looks like a european style lip.

Any clues to who makes it and what sizes it is available in?????

http://customerpics.americanmuscle.co m/viewsingle.php?id=1939&sku=69002

[Raudermaster]

Too hard to tell from that angle.

[The Big Stu]

My first guess is American Racing, but all the ones I saw on the site were raised at the spokes

[Aren Jay]

I agree American Racing

http://www.autowaretech6.net/nextwheels/oktire.htm

Try this website out, set it up for your Marauder, get your colour right, then pick American Racing Torq-thrust M Shelby No. 605MS rim. (it is near the end, keep clicking the right arrow)

http://www.americanracing.com/dealerline/blackimages/mega/m605MS.jpg

They fit the Marauder btw.

[Bowman9]

They do look similar, but if you notice the American Racing wheel has a "two" step lip but the one on the red mustang has a european style lip like our stock marauder rims.

And test fit several rims on my Marauder, the American Racing rims stuck out a 1/2" past the fender lip on my car.

[TooManyFords]

I spotted this rim on American Muscles website, (it is not one of theirs). It is a customer submitted image showing off the Roush hood scoop.
If you notice it is a deepdish bullitt style with what looks like a european style lip.

Any clues to who makes it and what sizes it is available in?????



It is the factory 18" rim. I have the same ones on my 07 GT/CS.

[Bowman9]

I didn't think Ford had an OEM "deepdish" version of the bullitt rim available.
Do you have any pics of your 2007 GT/CS up on the web?


It is the factory 18" rim. I have the same ones on my 07 GT/CS.

[Canadasvt]

http://cache.jalopnik.com/assets/resources/2006/10/mustang_cs_review_2.jpg
http://img.photobucket.com/albums/v285/Canadasvt/ss_whe7.jpg
There are quite a few CS's at my work but all of them have these wheels, no deep dish. Would be nice to see though.

[TooManyFords]

I still say that is the stock rim... Angles, lighting and cleaning can make the difference. In the first picture, it is a stock V6 convertible with the factory scoop and 17, maybe 18 inch rims. I don't see anything special on it.

John

[Bowman9]

It could be the angle of the photo, but they look like they are deepdish to me.
Oh well :(

[Marauder]

Is it me or does the front look like a deep dish and rear not??? Like the got the front/rear mixed up.

They kinda look like foose rims.

[dreydin]

^ sure does

[sabtaj1]

I agree with you, think they are on backwards?