PDA

View Full Version : What gatorback did you use?



BigCars4Ever
08-29-2007, 05:21 PM
At 49K it's time to change the belt. Autozone does not list a part number for any belts for the Marauder. I had them look up a 2001 Mustang Cobra Gatorback and used that belt. It was tight going in but the tensioner is in a mid position and it all seems to fit.

KillJoy
08-29-2007, 05:27 PM
I cannot answer your question. However, I would recommend replacing your Tensioner. It was not much from Ford, and MAY prevent a later unwanted repair.

Just my thought.....

KillJoy

Raudermaster
08-29-2007, 06:26 PM
I cannot answer your question. However, I would recommend replacing your Tensioner. It was not much from Ford, and MAY prevent a later unwanted repair.

Just my thought.....

KillJoy

+1, when I got my A/C acc. replaced a month ago, they replaced the tensioner and put a Gatorback belt on since they said the pulley didn't look so hot.

Zack
08-29-2007, 06:27 PM
92.5" long I believe.

BigCars4Ever
08-29-2007, 06:30 PM
Tensioner looked ok. I'll keep my ear on it. 92.5" was the belt I used from the 01 Cobra.

KillJoy
08-29-2007, 06:32 PM
Why did you not request a '03 Mach 1 Belt???

KillJoy

LCSO34
08-29-2007, 08:28 PM
I will look in morning. I just bought one from Autozone Monday I think I still have the package... wait a minute here is the reciept on my desk #190807 4060922 $28.99 I will look anyway in the morning, and find the numbers on the belt. Ken

PS BC4E Dead Pedal == Best mod ever

fastblackmerc
08-29-2007, 09:08 PM
P/N 4060922 is the Gatorback replacement for the stock Ford belt.

I found that only AutoZone carries the Gatorback belt.

BAD MERC
08-29-2007, 11:07 PM
Here, Advance Auto Parts.

http://www.partsamerica.com/ProductList.aspx?parttype=1063&ptset=A&searchfor=Serpentine+Belts

You are all correct, 92.2" to 92.6" belts are right. The length is actually right in the part number.

ctrlraven
08-30-2007, 01:31 PM
Yeah I bought my belt and tensioner from Advance Auto Parts website, had the stuff in 3-4 days.

BigCars4Ever
08-31-2007, 04:56 AM
Crap! The belt I ended up with was 4060935. I'll see if Ican return it on Sat for the correct one. Thanks everyone. Mabey this should be a sticky.

magindat
08-31-2007, 04:59 AM
935 is still in range of the 92.2-92.6. Your good.

SILVERSURFER03
09-17-2007, 09:10 AM
Tensioner From Ford List $80.43 Part #2w7z6b290-aa..
And Belt Is 93.2in 6 Grove As Per Ford

BigCars4Ever
09-17-2007, 10:17 AM
I will look in morning. I just bought one from Autozone Monday I think I still have the package... wait a minute here is the reciept on my desk #190807 4060922 $28.99 I will look anyway in the morning, and find the numbers on the belt. Ken

PS BC4E Dead Pedal == Best mod ever

This part number was dead on. Fit pefect. Thanks. Your reply should be a sticky!

bigjon
09-17-2007, 03:41 PM
http://www.crownvic.net/bigjon/gatorback_partnos.gif
if this is still accurate.