PDA

View Full Version : Quick Help - Transmission Pan


crouse
10-11-2007, 09:08 AM
I'm installing a M-7195-AOD pan today. The pan didn't come with a gasket so I assume I re-use the factory gasket. It doesn't quite fit on one side. The gasket hangs over on one corner. Is this ok or should I have purchased a different gasket?
jonroe
10-11-2007, 09:19 AM
I'm not sure you can use the AOD/AODE pan. I got the 4r70 pan from Ford Racing and it fit perfectly and I re-used the gasket as instructed.

Jon
fastblackmerc
10-11-2007, 09:19 AM
I'm installing a M-7195-AOD pan today. The pan didn't come with a gasket so I assume I re-use the factory gasket. It doesn't quick fit on one side. The gasket hangs over on one corner. Is this ok or should I have purchased a different gasket?

It should be OK, just need to plug that extra hole.
crouse
10-11-2007, 09:19 AM
They discontinued that pan, so this is our only option.
crouse
10-11-2007, 09:21 AM
It should be OK, just need to plug that extra hole.

Yup, hole is plugged with a little lock tite blue also.
crouse
10-11-2007, 05:12 PM
It's back together with no leaks. Thanks for the help. It took 7 quarts.

About 3 years ago, my local Ford dealer did a fluid & filter change on my transmission. The lolipop was still in the pan. Would they re-install the pan with the lolipop or did they screw me?
jdando
10-11-2007, 06:03 PM
Lolly pop still in the pan??:help:


Sounds like you might have gotten the famous "wall job":(

jeremy
jonroe
10-12-2007, 04:27 AM
They discontinued that pan, so this is our only option.

Sorry, I didn't know. I guess I got lucky before they went away.
crouse
10-14-2007, 10:26 AM
Found my receipt and it was just a flush, not a fluid and filter change.