signal/turn light socket

[Aren Jay]

I just notice today that my Left Turn light (signal) socket is poking out of its port. How hard is it to plug it back in?

[Aren Jay]

anyone know?

[magindat]

Front or back?

[knine]

PITA> Have to remove the whole signal corner lamp to access it, this involves removing to get access. I replaced my right corner lamp (sc***** up), had to remove the battery. Started on the left one to adjust it, gave up when I saw what all I had to remove just for an adjustment, gave up. Not enough time then.

[fastblackmerc]

PITA> Have to remove the whole signal corner lamp to access it, this involves removing to get access. I replaced my right corner lamp (sc***** up), had to remove the battery. Started on the left one to adjust it, gave up when I saw what all I had to remove just for an adjustment, gave up. Not enough time then.

WHAT???? :eek::eek:

Just take out the headlight on that side and loosen the nuts holding the cornering light assembly. Replace the bulb, reinstall the headlight. After you take the headlight out you might want to modify it like this.

This is stock
http://i167.photobucket.com/albums/u133/fastblackmerc/MM%20Mods/OEM%20Headlight%20Assy/StockMMHeadlight.jpg
This is modified
http://i167.photobucket.com/albums/u133/fastblackmerc/MM%20Mods/OEM%20Headlight%20Assy/ModifiedMMHeadlight.jpg

Makes it easier to come out next time.

[knine]

Wow, so much easier.

[Aren Jay]

So the 2 or 3 nuts and take the light assembly off the car then just pry it open?

ok.

Thanks.