Tuning via Innovate LC-1 & X-Cal2

[Marauder131]

Has anyone done tuning, specifically A/F adjustments via the LC-1 and X-Cal2? To anyone knowledgeable in this regard, I would appreciate any instructions, as this is not something I am familiar with at all. How does one utitlize both units for this purpose, both in connecting them and with respect to making actual adjustments, if required?

Thanks.

[fastcar]

Sorry, mate.

No experience at all. Maybe you can try searching the forum for those keywords? Sorry I can't be more helpful...

fastcar:burnout:

[Marauder131]

Sorry, mate.

No experience at all. Maybe you can try searching the forum for those keywords? Sorry I can't be more helpful...

fastcar:burnout:

I wasn't able to find what I was looking for. My impression is that you could connect the LC-1 to a laptop to datalog the Air/Fuel ratio, which from my understanding should be around 11 on a s/c car(someone can please correct me if this is wrong). Should adjustments be needed, then one would use the X-Cal2 to manually make adjustments by adding or taking away fuel. However, it is more than likely not quite so simple, as I assume that the A/F ratio changes during various RPM ranges and dependant upon whether one is at WOT, or not. My hope is that the tune file I am receiving will be such that little or no adjustment will be required.

[Marauder131]

Ok, has anyone ever adjusted their A/F using an X-Cal2?