Ford radio removal tool set.

[Da Dark Jedi]

Need a Ford OEM Ford radio removal tool set. I think the part #URT-460 or the likes. NOT THE PLASTIC, the real stuff (steel).

[sociopath001]

i got mine at walmart

[Marauderjack]

AutoZone!!:beer:

[magindat]

Napa 67890

[SILVERSURFER03]

i just use a metal coat hanger and make my own as needed...it's easier that way ..make to 6in horse shoe install in hole push out twards the doors and pull out ....tada ford radio removal tool and there freeeee

[magindat]

i just use a metal coat hanger and make my own as needed...it's easier that way ..make to 6in horse shoe install in hole push out twards the doors and pull out ....tada ford radio removal tool and there freeeee

This procedure is outlined in my document on installing DR's D2.

http://www.magindat.net/ssm/info/AVIC/Install.htm

[ImpalaSlayer]

i just used a welding rod. cut into 4 pieces and pulled leike hell. worked for me

[magindat]

i just used a welding rod. cut into 4 pieces and pulled leike hell. worked for me

If you hit the catches correctly, it would fall out of the dash if you tipped the car up. It should come out effortlessly.

[RoyLPita]

I heard that you could use 4 nails.

[magindat]

I heard that you could use 4 nails.

Yes 4x 6d finish nails. They are kinda too short and a pain to retrieve after the deck comes out.

[1of327]

i just use a metal coat hanger and make my own as needed...it's easier that way ..make to 6in horse shoe install in hole push out twards the doors and pull out ....tada ford radio removal tool and there freeeee


Did just that...worked great.

[ImpalaSlayer]

If you hit the catches correctly, it would fall out of the dash if you tipped the car up. It should come out effortlessly.

3 out of 4 were easy i sort of missed the lower left and i wasnt sure how it really worked so i just had to keep messing with it.

[magindat]

3 out of 4 were easy i sort of missed the lower left and i wasnt sure how it really worked so i just had to keep messing with it.

That's exactly what the little bumps on the ends of the true removal tools are for... So you can feel it when they 'catch'.

So, I guess that brings this discussion full circle doesn't it!!!

[Dragcity]

I think mine was $3.95 at Advanced Auto..... Hangs on a nail in my garage.