Simple Question

[Eric-Blk2004]

Hey guys,

I tried searching but was unable to find anything in the large amount of threads that turned up.

I was wondering what a stock MM dyno'd. Granted all dynos are different etc etc - just wondering what the average was.

Counter to some of my previous posts I believe a JLT and gears maybe in my future - and defintely some cooling.

Well thanks for the read and replies.

[Blackened300a]

I seen a stock 04 come in at around 247 RWHP and about 265 RWTQ. Some have higher and lower

[Bradley G]

Mine was 236 bone stock

[Eric-Blk2004]

Interesting - I am going to assume the dyno was very forgiving when I made my run or highly corrected.

Thanks guys

[DOOM]

Interesting - I am going to assume the dyno was very forgiving when I made my run or highly corrected.

Thanks guys

What were your dyno numbers?

[sailsmen]

Most have been Dyno Jet inertia. HP/TQ can vary by large amounts from one dyno type/brand to another.

[Pat]

Don't recall the type of Dyno except it was in the "ground" and not on a platform. I had 245 RWHP with a JLT CAI and Diablosport flash tune.

Couldn't attest to the accuracy of the equipment or correction factors.

From what I read and talked to people about this subject 240 to 260 RWHP seems normal.

[Eric-Blk2004]

Yea mine was a dynojet in the ground. Rollers in the ground etc. I am not worried either way - DEZ does fantastic work so its all good in my book. I was just curious.

And my numbers were 277whp and 295wtq. My mods are Kook long tubes into a full magnaflow exhaust system. And a KN drop in filter...it must be the filter lol

[2,4shofast]

My baseline stock numbers on a dynojet at 5200ft were 235hp and 255tq. With a JLT it made 245 and 268 at 6300ft. With all the mods listed in my signature block it made 282hp and 292tq at 6300ft.