Thinking about buying

[ctrlraven]

Is the whole not reading fuel pressure issue fixed now? What are all the parameters it will read on my MM out of the box and how long is the Cat5 cable?

[Marauderjack]

Yeppers.....Works fine!!:beer::bows:

It will read about 30 different things...some are useless but interesting!!:rolleyes:

Cable is 3 feet but extensions are available.....

Call Ron and ask!!:D

I love mine...especially the FP, Trans Temp, and peak RPM's per run!!;)

Marauderjack:burnout:

[ctrlraven]

Thanks Jack, I shall be buying one very soon then. 3ft should be enough, I was thinking about putting it in place of the stock compass but then I would have to look up to see it so I'll probably put it where Zack put his.

[Marauderjack]

I put mine where Zack put his.....convenient and blends in well with the screen back lit in green!!:beer:

[High-C]

I put mine where Zack put his.....convenient and blends in well with the screen back lit in green!!:beer:

Do you have any pics of where this is mounted? I am thinking about doing the same thing....

Can it be adapted to read Boost Pressure?

[Marauderjack]

See attachments......does not read boost as OBD-II only reads vacuum...I guess??:confused:

[ctrlraven]

I think that is a great place for it, makes it almost look stock and within fingertips reach.

[252life]

I had to program FP, TFT, CHT and HP parameters manually, but it was pretty easy to do.

And how accurate is the Horsepower reading?

[Marauderjack]

And how accurate is the Horsepower reading?

I'd like to think it is close since mine reads about 525 HP at 10 PSI???:D

[ctrlraven]

Got one on order now, can't wait to get it into the car.

[Svashtar]

3 feet? No, that can't be right. Stock cable is 6 feet, and try as I might I couldn't get it to reach above the mirror, although I swear a couple of guys were able to make it fit. Luckily Joey included a second cable and connector and I ended up with about 3.5' extra that I tucked on on the tranny hump.

[FordNut]

Thinking about getting one now, what's the current pricing?

[fastblackmerc]

The last group buy was a good deal.

I mounted mine like Zack did the first time.

http://i167.photobucket.com/albums/u133/fastblackmerc/MM%20Mods/ScangaugeII/DSCN0010.jpg

[justbob]

That is one very clean dash install!!!

[Marauderjack]

That is one very clean dash install!!!

Thanks!!:beer:

I took my time with my Dremel tool and it came out OK......easy to read and punch da buttons!!:D