fordman
08-06-2008, 08:52 PM
For those of you who seen my earlier post about not getting the aftermarket headlights and Cornering Assembly lined up correctly, here is the final product. After about 2 hours in the garage, here is the drivers side before and after result.
Long story short, had to break out the dremel and expand the openings (very slightly) as to where the 2 bolts go through the inner fender. Aftermarkets were not lining up correctly.:mad2:
Before is on the right, after on the left. I know the after pic is dark, I think you can still get the idea as to how it looks though. sorry. The assembly is slightly low, but the gaps gone! If Im not mistaken, the oem is also slightly lower.
Let me know what you guys think.
Long story short, had to break out the dremel and expand the openings (very slightly) as to where the 2 bolts go through the inner fender. Aftermarkets were not lining up correctly.:mad2:
Before is on the right, after on the left. I know the after pic is dark, I think you can still get the idea as to how it looks though. sorry. The assembly is slightly low, but the gaps gone! If Im not mistaken, the oem is also slightly lower.
Let me know what you guys think.