Holiday Specials

[Dennis Reinhart]

OK here is the page you have supported me all year so I will let you start a lists of what you would like to see, I will do a lay away plane for any SC kit, so think about it and start your wish list.

Gt Fuel pump with wirring and sock

Xcal 2 or Xcal 3 with usb cable 379.95

Pro Guards 40.00

Aero Force Gauges

Forced Lube Kits with Stainless steel lines 125.00

Xcal Live wires 579.00

410 Motor sport gears

Vortech V3 of Novi Air to Air kits or NIC kits

Dynotech Drive shafts

Metco Drive shaft loops

Metco Controll arms

Auto Meter Pillar post dual pods

Autometer real oil pressure guages

complete 410 used rear end

Complete front 03 clip Black

two complet front doors Black

1 drivers side rear complete door Black

1 rear suwoofer

2 rear speakers

1 complete dash with both air bags and wiring harness

1 stock front windshield

1 complete evaporator and heater core box

1 blower motor

4 used rims and rires

1 used Vortech T Trim

1 used water to air heat exchanger with pump

1 used Marauder stock drive shaft

1 used 8.8 locker

7 used rims and tires

[marales]

It would be nice to have that high flow fuel pump, fuel filter, & radiator at a affordable price. These are the only items I don't have from you. Also if you have the 31 spline rear drive shafts at a good price that would not be bad.

[Dennis Reinhart]

New Twin-Screw Supercharger from Vortech
Vortech Engineering has announced the availability of the Lysholm design VL Series
superchargers featuring the Twin-Screw concept. Through an agreement with
Lysholm Technologies AB, Stockholm, Sweden, Vortech will distribute automotive
systems and tuner kits in the United States, Canada and Mexico. Vortech becomes
the only company to offer both centrifugal and twin-screw, compression-type
superchargers.
The VL is a unique positive displacement design that provides maximum low-end
torque as well as high efficiency for maximum top end horsepower…more efficient,
easier to make boost with 20 PSIG+ levels possible.
Initial vehicle applications include 2007-2009 Shelby GT500, the GT500KR Mustang and 2003-2004 Mustang Cobra (as a direct
replacement for the Roots-type supercharger) plus Tuner Kits (without
calibration/fuel management) in 2.3L and 3.3L
compressor sizing providing a 40-50%+ increase in power
Preliminary system features include an increased plenum volume design that allows
for an unrestricted flow to the intake port plus an oversized dual pass air/water
charge cooler (50% more area) for a lower discharge temperature. The manifold
provides for upgrading to the larger 3.3L compressor.
Integrated bypass valve and fuel rail mount positions are provided. Calibration is
accomplished through the DiabloSport Predator hand-held programmer which
controls ignition timing and fuel enrichment.
These are complete bolt-on system including all necessary belts, pulleys and
reusable high-flow air filter.
Available Spring 2009.
A Vortech 3-year/36,000-mile powertrain limited warranty is available.
http://www.modularfords.com/forums/images/statusicon/wol_error.gifThis image has been resized. Click this bar to view the full image. The original image is sized 3072x2304 and weights 941KB.http://i53.photobucket.com/albums/g61/VortechSuperchargers/SEMA%202008/IMG_0908.jpg

[Vortech347]

OMG hahahaah Sweet!!!

[Dennis Reinhart]

They will have pricing in the spring but I am not sure this will work on a Marauder even though it comes out on the drivers side, it probably not clear the wind shield wiper, but will see what spring brings.

[TAKEDOWN]

Fingers crossed, it'll fit on our Marauders!

[mdskiing]

I wanted to post a quick thank you to Dennis and his crew on the recent work completed at his shop.

My second trip there from Tampa went well. All work was completed in a timely fashion to a very high standard.

Will return when time and funds become more readily available!:D

Mario DiTroia
410 gears,
31 spline axles
underdrive pulleys
chip/program
cold air kit

[RoyLPita]

I would like to see that engine in a MM.

[Taemian]

I'll take the Proguard at $40, if that's the one that supports the rear bumper cover, Dennis.

[Dennis Reinhart]

I wanted to take the time and thank every member here that has ever called and spoke with me or my staff, and all of you that have made purchases from my company. I have been fortunate to befriend and meet many of you over the many years of being on this site and attending the many car meets. I will be glad to see 2008 come to a close. I am hoping as thousands of us here in the United States that 2009 will be the start of the turning point to some normalcy we once had.

I started out in general automotive repair while still in the Navy, I was a gulf war veteran I joined the Navy in 1977, retired in 1997. I have seen the automotive market go up and down, in the 1970’s we had gas shortages sky rocketing prices long waits at the pumps, here in 2008 we have had seen a roller coaster of the same kind, this is all do to the fact that the United States imports 70 percent of its oil from foreign countries. The economy in this past year is the worst I have seen in twenty years, many friends I have known as well as family have lost thousands in their stocks and retirement funds.

I live just out of Jacksonville Florida, I have seen many businesses fold in the last six months that have been around for generations, here are list of a few just here in Orange Park. Bennigans restaurants, Steak and ale, Texas’s, road house, Cogin Pontiac, Hyundai of Jacksonville, do an internet search it is unbelievable http://www.bankruptcydata.com/Research/Largest_2008.pdf

Countless small businesses, that have been around for years are now struggling. I know of a jeweler who told me he lost 200K in the stock market, he is so slow right now he is taking stones out of gold jewelry and selling the gold to cover his over head.

I have never seen so many restaurants have employees walk up and down the side walks daily with signs advertising theire specials. In these trying times all anyone can do is cut back, think smarter and wait and see what this New Year will bring. I talk to many of my vendors daily and many are slow, and do not carry nearly the stock on hand as they did a year ago, this causes delays. I used UPS and went to DHL to cut costs DHL has now gone bankrupt and has been bought out by UPS, general automotive repair had fallen off because of the very high gas prices that along with new cars with 0% financing and 60 month payments.

People would not repair an older car, they just traded it in and bought a brand new car with no payments for 90 days, then the reality sets in and they realize as the economy fell off they could not afford the car. With the lax in stringent credit guidelines the same problems led to the mortgage crisis we are now in, but all that has changed now, So this slow down is all over the market, not only at the independent shops but many dealers are the same, I know most of the service managers around in this area and they say it’s as bad as they have ever seen, but I feel this will improve as the consumer keeps there older cars and maintain them, and thank god gas prices are slowly falling. But this is only a temporary decline, gas prices will again sky rocket next year unless some thing is done.
I hope many of you got a chance to watch 60 minutes last night, now there is talk of a 45 BILLION dollar bail out in the auto industries big three, so all of us are just going to have to set back and wait to see what is going to take place.

Yesterday Sheila and I went out to buy some Dyna mat for a Cobra Mustang we are working on; Circuit City has filed for bankruptcy along with Sound advice. So we are feeling this as well, I have cut back on staff, Sheila works on her day off every Friday to help with the phones so does my son Michael, so if I am on the Dyno and cannot get to the phone he takes messages and I try to return all calls, we turn all the lights off at closing shut down computers at the shop, cooler weather is here so the AC is not needed. Steve and Edwin’s hours have been cut, but we are hanging in there, I do feel it will get better.

Many orders have been delayed due to several issues; one order sat in Michigan for three weeks that was supposed to have been picked up by a contracted shipper, and never was, till I was informed by the vendor the parts were still setting on his floor. I can assure you this will get better; I want to thank each and every one of you for your orders and your support and patience. Every customer is important to me and we thank all of you for all your support and continuing orders.

Respectfully
Dennis a Reinhart

[Master]

Yeah, better slap a Proguard on my car as well. If all goes according to plan, I'll need it!
;)

[Dennis Reinhart]

Considering this very tight economy our spacials have helped I want to thank all of you that have patiently waited on some orders, Addco is getting bars out as fast as possible those three members that placed orders they have been shipped, you can email me for tracking #s
SO 21145 S H
SO 21226 D P
SO 21133 R L

DHL will be switched over to UPS with in the next ten days I hate to see any company go under, but this has really cost the small business owner time and money, it cost me over 200 a rim to send the to the Aloha State, I will run the specials till December 15Th.
I sold a Novi 1500 AA kit today, thank all of you for your support and sales, and have a safe holiday.

Dennis and Sheila Reinhart.

[03calitejas]

Thanks for all your help Dennis...enjoy Thanksgiving and I promise to not call the shop or your casa on Thursday...maybe twice tomorrow :rolleyes: but I will cease fire for the Holiday

seriously....Thanks so much for all the technical advice recently and the good pricing on the new and used toys has really helped me stretch a limited budget out a lot further.

:beer:

[Black_Noise]

I want a DS loop, how much, you can PM me $ and how to order

[Dennis Reinhart]

I want a DS loop, how much, you can PM me $ and how to order


Just call me I am here till 1:00PM and we ordered 10 more Pro Guards.

[HBTMD]

Dennis: I would like to wish you a wonderful Thanksgiving and thank you for all of your excellent help.

I love my Reinhart/PHP Cold Air Intake and the custom Reinhart Tune I purchased from you.

I especially appreciate all of the time you have spent with me on the phone answering all of my calls before and after the purchases.

I believe you to be extraordinarily knowlegable about the MM and other vehicles.

I also believe you to be an honest and forthright business man.

BTW: When do you expect your next shipment of Proguards and Cold Air Intakes to arrive? They would make great Xmas and Hanukkah presents for any MM owner. :beer:

[Dennis Reinhart]

Thank you we had a very good day here, with two xcal sales one PI 3000 stall converter and one Novi Kit for a 07 CV LX that will be installed here in February, I am also in the works on doing the first CNG super charged CV PI done in the USA. We also should be receiving more Pro Guards, I am going to try and stock Addco sway bars, but they like thousands of other small business are seeing a roller coaster of sales, and have been on back order, hopefully 2009 will be better, but I feel it will not be right away. So again thanks for the support and sales, questions and advice is allways FREE:beer:

[alonzo03]

how much for the gears

[Dennis Reinhart]

how much for the gears


You can call me tomorow

[jvillerauder]

dennis if your serious about the layaway for the sc im game just give me a % of what i would need to come up with if at all possible. i live in the jacksonville area and have some friends who work near your shop and have nothing but good things to say in the next two weeks ill need a cai and in the next two months 410 gears would like to upgrade the exhaust a definitely a tune considering i live in the next county i could be a decent customer the next year getting my marauder hooked up,then theres my crown vic lx sport i look forward to doing business in the future and im super serious about the sc layaway just give me a deposit amount and i would have it asap thanks

[Dennis Reinhart]

dennis if your serious about the layaway for the sc im game just give me a % of what i would need to come up with if at all possible. i live in the jacksonville area and have some friends who work near your shop and have nothing but good things to say in the next two weeks ill need a cai and in the next two months 410 gears would like to upgrade the exhaust a definitely a tune considering i live in the next county i could be a decent customer the next year getting my marauder hooked up,then theres my crown vic lx sport i look forward to doing business in the future and im super serious about the sc layaway just give me a deposit amount and i would have it asap thanks


PLease call me 904-276-5503

[Dennis Reinhart]

Today was a very good day, we sold four sets of sway bars, one set of UDP one set of gears and bearing kit we sold one Novi 1500 Monday, and one NOIC kit today on a 90 day payment plan, thank all of you for the sales.

[Dennis Reinhart]

I just wanted to say thanks for all the sales, I will run this till Dec 31, we sold a set of headers for a 98 Mark 8 today, I will offer free shipping on every thing till Dec 31st, my next project is to install a 03 Marauder motor in a 1998 Mark 8 with a 03 Cobra Eaton blower, this should be a first should make a real nice ride and its for my wife Sheila. I am working on Davids car as well as finishing up a 2000 SC CV, I will post pictures when I can.

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1229398555-mark8.jpg

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1229398577-mark8m.jpg

[Dennis Reinhart]

I have a brand new set of Widened rims, these were just done by weld craft, these are new reproduction rims. I have the same set on my car and this is what I ran with Nito's before going to MT, I am asking 800.00 Plus shipping we should have more Pro Guards next week.


http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1229626248-weldcraft.jpg

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1229626282-weldcraftside.jpg

[Dennis Reinhart]

This weekend we will be doing a install of a Novi Air to Air kit this weekend sold in this months speacials, we are going to do a full photo sh the dissasembly and install. So this help others in the future and it will be hosted so any one who buys my kit has access to it.:beer:

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1229627346-nsl1500.jpg

[Dennis Reinhart]

I will be ending the sale Tuesday, thank all of you for the sales, I wish every one here a safe a happy Christmas.

[HBTMD]

Dennis:

Any word when your next shipment of Cold Air Intakes will be in?

Happy Hollidays :beer:

[Dennis Reinhart]

I have one in stock call me tomorrow.

[Dennis Reinhart]

Well because of Christmas Pro guards were delayed there in now five left.

[Taemian]

Well because of Christmas Pro guards were delayed there in now five left.

I still want one, pm me please.

[Master]

Hey Dennis:
Would it screw up any chance of finishing my car for the 12th (my Birthday, no less) if I asked to have a Pro-Guard added to the Bill of Materials? Been wanting one for some time, so now seems to be when I should get it what with the car right there and all.

[Local Boy]

Can I get a GT 40 pump still?

ALOHA

[Dennis Reinhart]

Can I get a GT 40 pump still?

ALOHA


Yes it comes as a kit, pump strainer splices and the wiring, please just call me tomorrow I will get it for you then

[Taemian]

Dennis, are the Proguards in stock yet? I'm still waiting to hear.

[Dennis Reinhart]

Dennis, are the Proguards in stock yet? I'm still waiting to hear.


I sold five yesterday I have one left

[Taemian]

I sold five yesterday I have one left

Well, then I'll take it as per post #9 of this thread!

How do you want my info? If I order it on your website, I don't get the discounted price you were offeing when you ran out of Proguards during this sale.

[freakstatus]

Well, then I'll take it as per post #9 of this thread!

How do you want my info? If I order it on your website, I don't get the discounted price you were offeing when you ran out of Proguards during this sale.

Ian, I'd say call DR and order over the phone. The website was a little wonky when I ordered through it and I had to call anyways to see if my order was received....it all worked out though and I was pleasantly surprised at how fast I got my Progard.:)