View Full Version : ... need to drain the intercooler ...
Marauder386
12-01-2008, 02:19 PM
Okay, I am going to remove/replace the air compressor for the ride height. This is located UNDERNEATH DR's system. I need help and guidance on the safest way to drain it off so I can remove the box. Help greatly appreciated in advance !
:cool4:
Dennis Reinhart
12-01-2008, 03:00 PM
It is very easy just give me a call.
Marauder386
12-01-2008, 04:03 PM
Will do that tomorrow Dennis. Right now I have compressor unbolted from donor RoadPig but I cannot figure out how to unplug the backside of the unit from the air line that runs back to the airbags...:mad2:
:cool4:
GetMeMyStogie
12-01-2008, 04:31 PM
Will do that tomorrow Dennis. Right now I have compressor unbolted from donor RoadPig but I cannot figure out how to unplug the backside of the unit from the air line that runs back to the airbags...:mad2:
:cool4:
Do you see an orange-coloured ring around the point where the air line enters the black-coloured canister (dryer) mounted to the pump? Use a flat-blade screwdriver or similar tool to push the ring in toward the dryer while pulling on the air line - that should get the line out.
Marauder386
12-01-2008, 05:22 PM
Woooo yeah ! That worked .... compressor in hand right now. Will go in tomorrow after a PhonCon with Dennis to educate myself on draining of intercooler...
:cool4:
Take outlet hose off of IC water pump and turn the pump on.
Let the pump pump it all out.
Refill.
Done.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.