Speaker Adapter Plates

[ctrlraven]

John can you make some MDF or ABS plastic adapter plates to allow a 5.25" speaker to be mounted in the factory front 5x7" speaker locations? If so how much?

[Pops]

Its not hard to make them yourself! Get a piece of ABS and lay the old speaker on it and trace it out. You can use a Dremel tool with a 1/8 drill bit to cut it out. Just go slow! Lay the 5 1/4 on the the adaptor plate and trace and repeat.

[ctrlraven]

Thanks for the tips John!

[Pops]

Your welcome! :)