PDA

View Full Version : Interested


DTRMiguel
02-19-2009, 06:45 AM
I was looking online at this kit. Just cutious if i would have any major issues with fitting or hitting something. I would think we have a bigger engine bay than an stang but where our components are located would this be an issue installing? I need honest answers please
http://www.turbochargedpower.com/96-04%20Mustang.htm

Please leave the "go with trilogy" or "go vortech" out of this thread it only starts bickering.
NATEHAWK
02-19-2009, 06:48 AM
get a trilogy LOL :banana:
DTRMiguel
02-19-2009, 06:50 AM
get a trilogy LOL :banana:

LMAO special you need help buddy
Joe Walsh
02-19-2009, 06:59 AM
That is a sweet looking twin turbo kit, but I think that the Marauder's huge aluminum front crossmember causes all sorts of problems when you try to route the exhaust piping.
It could be done, but you most likely would end up cutting and re-welding all those pretty header pipes, and have no room for the 3" dump pipes.
Local Boy
02-19-2009, 07:01 AM
I'd say negative....

It won't work...

Looks like you will run into a number of serious issues...not to mention having the turbo's so close to the ground, you run the risk of hydro-lock when you hit a water puddle...Just MHO...

Looks awesome though...

Just get a Procharger...:D

ALOHA
DTRMiguel
02-19-2009, 07:05 AM
I'd say negative....

It won't work...

Looks like you will run into a number of serious issues...not to mention having the turbo's so close to the ground, you run the risk of hydro-lock when you hit a water puddle...Just MHO...

Looks awesome though...

Just get a Procharger...:D

ALOHA

FIT no makey the kitty any more:help:
DOOM
02-19-2009, 07:14 AM
Go get a trilogy!!!!!!!!!!!!!!!!!!!!!!!
Zack
02-19-2009, 07:15 AM
FIT no makey the kitty any more:help:

I think you are mistaken grasshopper!

As for the turbo, it wont fit unless a Tubular K-member is made for the car.
DTRMiguel
02-19-2009, 07:22 AM
If i were to get a SC it would be trilogy! But i like the numbers turbo's make and its different may not get a turbo but i like this kit and was curious if it would work.
DTRMiguel
02-19-2009, 07:23 AM
Go get a trilogy!!!!!!!!!!!!!!!!!!!!!!!

I hope the American Gangster dosent see this. It could start something :lol:
DTRMiguel
02-19-2009, 07:24 AM
As for the turbo, it wont fit unless a Tubular K-member is made for the car.

So the one that comes with this kit wont work? Could i just get it fabbed?
Zack
02-19-2009, 07:27 AM
So the one that comes with this kit wont work? Could i just get it fabbed?

Can you put a square block in a round hole?
DTRMiguel
02-19-2009, 07:28 AM
Can you put a square block in a round hole?

:rolleyes: gimme some grease and a set of pliers
SC Cheesehead
02-19-2009, 07:29 AM
Can you put a square block in a round hole?

Uhhhhh, maybe with a big enough hammer.....:rolleyes:
DTRMiguel
02-19-2009, 08:22 AM
Would there be alot of laggg in a rear mounted turbo?
rayjay
02-19-2009, 10:15 AM
Anything can be made to work if you have enough money and time.
O's Fan Rich
02-19-2009, 10:31 AM
FIT no makey the kitty any more:help:

Not from what I hear.... I think Gregg can hook a guy up.......
O's Fan Rich
02-19-2009, 10:40 AM
Don't think so Mikey.....

This , maybe due to the turbo placement:

http://www.youtube.com/watch?v=TzovmH3QIw0

http://www.hellionpowersystems.com/data.gt500.html

Just get a TRILOGY,,,,,,,,,,,,, don't be a wussy......http://www.youtube.com/watch?v=1arJOC86YVo