PDA

View Full Version : Pioneer Avic Z2 install


NATEHAWK
03-15-2009, 09:16 AM
I will be adding a pioneer Avic-Z2 and taking out my Avic-N3. I see everyone has multiple writeups for installing the D series but what about the Z series. I got the install covered connections wise. Just the cosmetic end. John do you recommend the same Scosche kit you use for the D series for the Z series as well. I saw one pic on here where it looked like they someone used the same kit bit cut off the top and bottom. Let me know when you get a chance so I can purchase that kit from you Monday morning. Thanks alot in advance. And if anyone else has pics of the z series install for cosmetic reason that would be great or any pointers on locking it in tight. i wouldnt want it poppin out.....:lol:Jake knows what I mean on that one.
Pops
03-15-2009, 09:36 AM
It uses the same kit as the Other double din radios but i think needs a little trimming. Need to get a back brace on it!
NATEHAWK
03-15-2009, 09:43 AM
Cool! Thats for the quick response John. You take paypal or prefer visa over the phone?
Pops
03-15-2009, 09:44 AM
You can do either.
DOOM
03-15-2009, 09:45 AM
Z2 excellent choice :2thumbs:
NATEHAWK
03-15-2009, 09:57 AM
How much you need John i will paypal you right now
Pops
03-15-2009, 12:01 PM
What all do you need? Kit harness and steering wheel control intraface?
NATEHAWK
03-15-2009, 12:10 PM
My fault for not being more specific. Just the Scosche fit kit. I have everything else from my Avic-N2. Buddy of mine gave me a great deal on his Z2.
Pops
03-15-2009, 01:25 PM
The kit is 12.00 plus shipping. You should buy one local. By the time you pay shipping it will be more.
NATEHAWK
03-15-2009, 01:27 PM
Oh ok i was just tryin to deal with our vendors...thanks thou
Pops
03-15-2009, 01:34 PM
I thank you for checking with me but will tell you when it is better to buy local!:)
ImpalaSlayer
03-15-2009, 03:49 PM
only way i see to stop it from falling out is to pull that trilogy out and give it to me :D
NATEHAWK
03-15-2009, 03:55 PM
only way i see to stop it from falling out is to pull that trilogy out and give it to me :D

You know that aint goin happen lol..You must be dreaming my good man.
ImpalaSlayer
03-15-2009, 03:55 PM
haha John has me covered anyway blower wise
NATEHAWK
03-15-2009, 04:02 PM
I heard....Thats cool...
magindat
03-16-2009, 07:35 AM
I recently discovered a 'best kits' might be better. It's loose on the D3 and F series, but should provide better clearance for the motorized face on the Z series and D1/D2.

Free with your address.

Rich

I assume this will be OK since John offered local. Also, send John the kit info i send you so he has it for his arsenal of info!!!
magindat
03-16-2009, 08:09 AM
Nathan will try this kit and if it works (which I truly don't know for sure - I THINK it will work), he'll pass the info to John and the rest of us!
Pops
03-16-2009, 08:18 AM
Got the message Rich! Its ok to post!
magindat
03-16-2009, 08:24 AM
Got the message Rich! Its ok to post!

Cool. I have this kit from an individual who purchased local and the fit SUCKS (hole too big) on an F series. However, I think it will provide good clearance for the door slide out on D1/D2 and Z. The face plate is deep, though. So I'm curious.

We'll see!
NATEHAWK
03-16-2009, 09:13 AM
We will see too be continued!