View Full Version : compression check
james1986fox
05-24-2009, 09:47 AM
I did a compressioden check on all the cylinders in my marauder and all of them read 180 psi besides cylider 1 which read 200 psi. Are these numbers ok?
ImpalaSlayer
05-24-2009, 09:56 AM
being that all the numbers are so close id say your fine, how ever i dont know what the specs are
james1986fox
05-24-2009, 04:04 PM
Anybody else got any info on this
Adam12
05-24-2009, 04:27 PM
id say your good...if you did a dry check and all were between 170-220 your fine. 20 psi isnt a huge change it you put a few drops of oil in the cylinders and did the test again they will all probably be even closer.
james1986fox
05-24-2009, 04:35 PM
im just trying to get this lean code on bank 1 figured out my cylinder one spark plug keeps fouling out looks to be wet i dont know whether its oil or gas but the car definately feels like its only running on 7 cylinders my fastest time down the quarter mile was 15.48 with cai, 4.10s, and tune so somethings wrong.
james1986fox
05-24-2009, 06:46 PM
:confused::confused::confused:
Dennis Reinhart
05-24-2009, 06:51 PM
I did a compressioden check on all the cylinders in my marauder and all of them read 180 psi besides cylider 1 which read 200 psi. Are these numbers ok?
That is about right, I would also recomend a cylinder leak down test.
james1986fox
05-24-2009, 09:15 PM
That is about right, I would also recomend a cylinder leak down test.
Thanks for the help
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.