PDA

View Full Version : Fog Light adjustment?


mherman18
05-28-2009, 06:50 PM
Does anyone know how to raise the beam of the fog light? I put a HID kit in the fog lights and turned them on and they are aimed like 2 feet in front the bumper. They are aligned perfectly center just need to come up. I figure there is an adjustment screw but is probably more than one and I don't know if left raises and right lowers or vice versa.
Thanks in advance
TiTo35
05-28-2009, 06:55 PM
Thats a good question! I thought the foglights werent plug and play but you had to do a lil modifications to it.
BAD MERC
05-28-2009, 07:04 PM
Make sure your HID bulbs are inserted straight. If they are too close to the reflector on one side it will cause the light to scatter uncontrolled.
mherman18
05-29-2009, 08:51 AM
They look great but need to be moved up some.
Egon Spengler
05-29-2009, 09:16 AM
My ranger was adjustable... don't know about these bad boys though... I would assume there is a way to adjust...
fastblackmerc
05-29-2009, 09:28 AM
Yes they are adjustable. See the brass screw at the bottom of the light for horizontal only adjustment. I'd also suggest removing the diffuser as it's only a press fit.
mherman18
05-29-2009, 06:08 PM
ok so I just turned the screw all the way both ways and nothing is different than before. How do you remove the diffuser? Maybe that will help.
fastblackmerc
05-29-2009, 07:12 PM
ok so I just turned the screw all the way both ways and nothing is different than before. How do you remove the diffuser? Maybe that will help.

Take the foglight out, separate it, remove the diffuser and reassemble.