PDA

View Full Version : Manual Transmission


ta3mo3
08-04-2009, 10:11 PM
Good day all ,

will the svt cobra manual Transmission fit to 2003 300A marauder motor

coz i'm to gonna swap my 1991 fox mustang with the MM motor


what do you think about my swap ? :help:
ta3mo3
08-08-2009, 09:48 PM
any update !!
ImpalaSlayer
08-08-2009, 10:43 PM
can you please elaborate on your swap?
ta3mo3
08-09-2009, 09:48 PM
right now

I just got the 1991 Fox body with no engine and transmission

and I have full motor & transmission removed from a wrecked 2003 MM (300A)

so what do you recommend me to do :
- to install the motor with its transmission
or
- to install the motor with manual transmission, which transmission will fit ?
SC Cheesehead
08-10-2009, 03:33 AM
There have been a couple manual transmission swaps in MMs. May want to PM Master and Dennis Reinhart, they might be able to help you out.
Master
08-11-2009, 03:21 AM
Bolts right up. No worries. Just like having a manual mach 1, really. The computer will need masaging to avoid a couple of lights (none of which seem to effect performance) but apart from that is pretty straight forward.
Keep in mind that manual tranny engines came with a stronger crank.
For simplicity sake, I'd stick with the auto - especially since you alreaay have it - but either way you'll do fine.
Hope this helps.
ta3mo3
08-11-2009, 05:28 AM
thanx


what type of shift kit you recommend for the auto ?
Marauderjack
08-11-2009, 05:50 AM
thanx


what type of shift kit you recommend for the auto ?


J-MOD!!:beer::bows:
ta3mo3
08-11-2009, 01:15 PM
J-MOD would be hard to get in my country !

can i do J-MOD myself? How? what do i need for that ?
fastblackmerc
08-11-2009, 01:23 PM
J-MOD would be hard to get in my country !

can i do J-MOD myself? How? what do i need for that ?

Do a search... it's fully explained.
SC Cheesehead
08-11-2009, 01:27 PM
here's a couple links to check out:

http://www.tccoa.com/articles/tranny/transmission/index.shtml

http://www.crownvic.net/tech/4R70Wnotes.pdf

http://www.vapauto.com/jmod.htm

And like FBM said, there's plenty of good info on MM.net as well, just do a search.
ta3mo3
08-11-2009, 09:25 PM
WooW

J-MOD looks easy to do , but i need some pictures to make sure i'm doing the right steps :)

thanks
mohammed
08-12-2009, 03:51 AM
http://i.ebayimg.com/04/!B(4IFig!2k~$(KGrHgoH-EQEjlLluvvMBKeiSNpSqQ~~_3.JPG
Marauderjack
08-12-2009, 05:02 AM
WooW

J-MOD looks easy to do , but i need some pictures to make sure i'm doing the right steps :)

thanks

Here you go....

http://www.tccoa.com/articles/tranny/shiftybusiness.html

For all tech articles go here....

http://www.tccoa.com/articles/tranny/index.html#
Vortech347
08-12-2009, 12:50 PM
Its easy. Just get a TR-3650 out of any 00-04 Mustang It'll bolt right up. Just install the correct 6 bolt flywheel and clutch too. Its pretty damn easy. You will need a custom tune though because the computer will go ******* not knowing where the trans is.

Don't use a T-45 they are weaker.
justbob
08-12-2009, 01:00 PM
TKO 600 FTW! Thats what i'm planning.
Vortech347
08-12-2009, 01:41 PM
Even better. :) You'll want to gear the hell out of it though, 600's have taller gears.