Break into a Marauder Trunk in 7.5 Seconds

[N40GL]

Most LEOs probably are already aware of this, but evidently you can break into a Crown Vic (and, therefore, a Marauder) trunk in 7.5 seconds. Watch the video here (http://www.troyproducts.com/FLVs/Trunk%20light%20plate/CVTrnkltplt.html). I learned last night that a Deputy out west had his MP5 stolen, along with a personal weapon and most of his uniform gear. Since our cars are often mistaken for police vehicles, we may eventually be similarly victimized.

Group buy information:

Ordered TODAY - 16 September 2009 - 1:07 PM EDT.

I've been advised to expect delivery drop-shipped from Troy Products in 7 business days. Stay tuned!

[Breadfan]

Wow that was cool...yet uncool at the same time.

I bet a plate can be bolted or welded in by the DIY'er as well.

[N40GL]

I bet a plate can be bolted or welded in by the DIY'er as well.

I agree and was thinking of that. However, there is some advantage (at least to me, perhaps others) to having one cut to fit, and ready to install. That's why I put this up and am investigating a group buy.

[MERCMAN]

Just to play the devil's advocate here,, would it not be cheaper to just remove the handle inside the trunk??

[Breadfan]

I agree and was thinking of that. However, there is some advantage (at least to me, perhaps others) to having one cut to fit, and ready to install. That's why I put this up and am investigating a group buy.

No I definitely agree there. I'm betting it's not that pricey in a group buy anyway.

[O's Fan Rich]

Ouch...... I'm gonna fix that....

[RacerX]

Just to play the devil's advocate here,, would it not be cheaper to just remove the handle inside the trunk??
:D Exactly! Or stuff it up where it cant be grabbed! Could even go to home depot and get some brackets, bend them in a vice, drill a couple of holes...

[N40GL]

:D Exactly! Or stuff it up where it cant be grabbed! Could even go to home depot and get some brackets, bend them in a vice, drill a couple of holes...

I don't think the handle is the problem. It's what the little lanyard of the handle is attached to (the trunk release that is pretty exposed and the bad guys know where to grab). I think the LA County Sheriff would've done that, if that's all that's required.

I found one web source that wants $25.00 for a set of two. By the time I've fab'ed up my own, I've spent at least $25 of my time, plus some cost of materials to recreate the original.

[Blackened300a]

. Watch the video here (http://www.troyproducts.com/FLVs/Trunk%20light%20plate/CVTrnkltplt.html) .

Thanks for the nightmares! I think Ill get to work on something asap.

[RacerX]

Fine then! Just hang a couple of rat traps in there!!! That's cheap enough!!! :P

What really sucks is that even if you have those, there's som damage done to our beautiful MMs...

[N40GL]

Attached is the Law Enforcement Bulletin from the Armstrong Atlantic State University that describes this. Look at the pictures - I don't think removing the handle/lanyard will help a whole lot...

[Leadfoot281]

They could have done it in less than 7.5 seconds by breaking the drivers side window and hitting the trunk release button.

How many people actually lock that anyway? I sure don't.

[juno]

Damn, where's the Trunk Monkey when you need him???

[MERCMAN]

attached is the law enforcement bulletin from the armstrong atlantic state university that describes this. Look at the pictures - i don't think removing the handle/lanyard will help a whole lot...



linky bad :(

[N40GL]

It works for me - remember, you're downloading a PDF file, not clicking a weblink.

[RacerX]

Link's fine. Do you have Adobe Acrobat reader?

[Taemian]

I'm in for any group buy of this product. I actually DO keep my inside trunk release locked all the time, I just made a habit to hit the fob instead. But I've always thought the door panel could easily ripped off and the connector manually jumped.

Also, whether it's my 870 Tactical or any other long gun, it's in the trunk mounted locking rack during food stops, or WITH me in any hotel room or any overnight stop with my jump bag also. Anything else I'd consider unprofessional.

Sub guns must be a pain to secure; too big for the black box, too short for the rack.

We had a spate of break-ins to duty vehicles that stopped after a pair were caught, and mugshots released to the media afterwards showed the two VERY bruised and swollen faces of the offenders.:eek: All weapons and most ammo was recovered. Imagine that?!

I've even considered putting in the old Tremco lying in the garage, but our PATS pretty much negates the need. (Unless it's for a duty car, of course, where footbails occur.)

[FordNut]

Interested. Probably would take 2 sets, depending on price.

[CRUZTAKER]

Thanks for letting us know!


I had my trunk hook/latch disconnected when I had the lock painted black years ago.

I only use the keyless entry or fob to open it.

I never imagined going in thru the reverse light.

[RacerX]

Guess I shouldnt leave this in the trunk anymore... :rolleyes:

[SILVERSURFER03]

Yep just checked the one in my junk yard .. And yes i cut the handle off and i can still get in no problem ..... As for locking the button mine is theres things in there booohahahahaha

i'd like a set also sir ....so 25.00 is the price hummmm ill pm you

[TAKEDOWN]

Depending on $$$... I'm interested!

[magindat]

I think the LA County Sheriff would've done that, if that's all that's required.

I found one web source that wants $25.00 for a set of two. By the time I've fab'ed up my own, I've spent at least $25 of my time, plus some cost of materials to recreate the original.

Betcha they can't - safety issue...

True. But some of us enjoy the fab time! :D

[ImpalaSlayer]

oh great, now all the idiots out there who didnt know about this now do! wtf who would post a vid like that... oh wait someone trying to make money

[breeze]

my trunk button always locked, but if u have a alarm with a shock box your alarm SHOULD go off with the first hit with that force.

[JUST 1BULLITT]

Depending on price, as others have said - I'd likely be interested in at least a pair... (WHY did I read this post?! :bigcry: Now I won't sleep at night if my car is outside...ALL the "Scotch and Ambien" in the world won't cure this now! :lol: :shake: )

[Joe Walsh]

I'm definitely looking for 1, and possibly 2 sets.

[Spectragod]

Just to play the devil's advocate here,, would it not be cheaper to just remove the handle inside the trunk??

Unless you get locked in the trunk of your car.

[lucenti]

disconnect electric trunk release, then attach glue with broken glass, or something that is named after a letter and a number. tht will have a interesting result :)

[Mac-MerC]

learn something new everyday

[Blackened300a]

oh great, now all the idiots out there who didnt know about this now do! wtf who would post a vid like that... oh wait someone trying to make money

+1 Now its public on how easy it is to get into the trunk. I can fab something out of steel and bolt it up within a hour. Just sucks if someone attempts this because those reverse lamps are part of the entire panel and after just spending $$ for the S55 treatment, I think I would be more pissed at the damage then anything stolen out of the trunk.

[dohc324ci]

not cool. I used to think the trunk was pretty secure.....

[O's Fan Rich]

oh great, now all the idiots out there who didnt know about this now do! wtf who would post a vid like that... oh wait someone trying to make money

Believe me, Dave.. bad guy's all share this kind of information.
It does not need to be published to get the word around.

Remember that LEO's often have things in their trunks that bad guys really want and should not have.

[TAKEDOWN]

Sounds good to me!

[N40GL]

Deleted and moved to first post.

[MERCMAN]

are they drop shipping them? If not, can you bring mine to MV7 with you?

[N40GL]

They will ship to me, and I'll repackage and ship. If they are here by MVVII, I'll drag them along.

Did you get my email about the dog?

[ImpalaSlayer]

well i guess ill be making soemthins this weekend.

[fastblackmerc]

PayPal sent.

[Cougar_Marauder]

I'll take one. PayPal sent. If they are here by MV7 you can bring mine as well rather than shipping. Thanks!

[SMOKE]

PP sent. Not in a hurry and would rather have someone else do the fab work so this is a no-brainer.

Thanks bub!

Jonathan

[MERCMAN]

They will ship to me, and I'll repackage and ship. If they are here by MVVII, I'll drag them along.

Did you get my email about the dog?

Never got that e-mail,, IIRC, but then the RAM in my head needs some help

[MERCMAN]

PayPal sent :up:

[Shora]

TWENTY ONE BUCKS, INCLUDING SHIPPING (VIA USPS) AND HANDLING.

My PayPal address: "n4ogl@comcast.net"

I'm going to wait until September 11th (and maybe the 18th) to place the order with the manufacturer. PayPal to me right away!

(For reference: MSRP is $25. Shipping from a regular distributor is $8.)(Yeah, I bought one at that price to examine it.)


They will ship to me, and I'll repackage and ship. If they are here by MVVII, I'll drag them along.

Just to be clear, we PayPal "you" $21.00 and you will order and receive the units. Then "you" are going to cover the cost of shipping the units to those of us who cannot make it to MVVII?

[N40GL]

Just to be clear, we PayPal "you" $21.00 and you will order and receive the units. Then "you" are going to cover the cost of shipping the units to those of us who cannot make it to MVVII?

Absolutely correct.

[FastMerc]

2 sets for me if you please.

[N40GL]

Deleted and moved to first post.

[1stMerc]

Betcha they can't - safety issue...

True. But some of us enjoy the fab time! :D

Or as Chip Foose says "another great excuse to use a power tool".

[willpelton]

at the bottom of your post in the "quotes" section there is a hypelink to the word (HERE) that goes to some sex site. FYI

[offroadkarter]

How many people do you really think will know about that?


The last time i saw someone forcefully gain access to a crown vic, they busted the drivers window and popped the trunk via the button.

[jabird56]

Have sent funds for one kit through PAYPAL.

Thanks,
Jay

[O's Fan Rich]

How many people do you really think will know about that?


Well, last look and the views for this post was at 1409.......

so at least 2 people know.

[N40GL]

*Bump!*

Purchase list updated again.

[Taemian]

TWENTY ONE BUCKS, INCLUDING SHIPPING (VIA USPS) AND HANDLING.

My PayPal address: "n4ogl@comcast.net"

I'm going to wait until September 11th (and maybe the 18th) to place the order with the manufacturer. PayPal to me right away!

(For reference: MSRP is $25. Shipping from a regular distributor is $8.)(Yeah, I bought one at that price to examine it.)

Tried Paypal, said address wasn't valid form???

Cut and pasted n4ogl@comcast.net

What gives? I'd like to buy two sets.

[N40GL]

Tried Paypal, said address wasn't valid form???

Cut and pasted n4ogl@comcast.net

What gives? I'd like to buy two sets.

I'm inclined to think the problem is on your end, since I've got a whole buncha orders so far at this address (see first post). Why not try a different computer?

[FordNut]

Looks to me like that's an "o" (letter) instead of a "0" (number zero).

[N40GL]

Looks to me like that's an "o" (letter) instead of a "0" (number zero).

Yep - November four oscar golf lima

[FordNut]

Yep - November four oscar golf lima

Just curious. Looks like a zero in your screen name.

[FastMerc]

Did u recieve my payment?Nevermind answered my ques...

[ledzilla]

Sent Paypal for one set. Don't keep my trunk empty, so this gave me quite a shock.

[N40GL]

Just curious. Looks like a zero in your screen name.

Yeah - the screen name's different. It's a "Logan Story" that I'll tell you over a beer someday.:beer::beer:

[FreddieH]

Payment sent Via Paypal for 1 set.

[Taemian]

I'm inclined to think the problem is on your end, since I've got a whole buncha orders so far at this address (see first post). Why not try a different computer?

Tried three different computers in 3 places.

I cut and pasted your address. Below is what I get right above the email address, written in red.

Email Address: Please enter a valid address in the format name@domain.com.

I'm stumped.

EDIT: Manually typed it in, worked. No idea why cut/paste didn't.

[N40GL]

Bumping one more time.

Orders will be extended through Tuesday, September 15.

I received my set in the UPS yesterday and will post pictures tonight, and then tomorrow after they are installed.

Taemian: glad it worked. I have no clue why cut-n-paste doesn't work on PayPal. Maybe its an anti-scam thing.

[TAKEDOWN]

Put me on the list, Sir... PayPal sent!

[N40GL]

Here's what I got in the mail for $25 and $8 shipping (drop shipped from Troy Products). Fairly heavy gauge steel with brazed thread bosses on them. I went out last night after work for a trial fit, and ended up installing them in about 15 minutes.

I'll post "after" pictures in a little while.

[fastblackmerc]

Here's what I got in the mail for $25 and $8 shipping (drop shipped from Troy Products). Fairly heavy gauge steel with brazed thread bosses on them. I went out last night after work for a trial fit, and ended up installing them in about 15 minutes.

I'll post "after" pictures in a little while.

Nice. So we drill holes and these are installed behind the sheetmetal.

[1stMerc]

Altho i've already created my own, those are some nice looking peices and it will be interesting to see them mounted with better pics than those on Troy's website. You should send yours to them.

[N40GL]

After fifteen minutes of work, this is how it ended up. Picture on the left is the drivers' side light, and the other picture is, well, the other light (duh!). I thought it nice that they just screwed in there - if I ever have to remove them to replace a bulb, it'll be easy to put them back.

[TAKEDOWN]

After fifteen minutes of work, this is how it ended up. Picture on the left is the drivers' side light, and the other picture is, well, the other light (duh!). I thought it nice that they just screwed in there - if I ever have to remove them to replace a bulb, it'll be easy to put them back.

NICE... I have no regrets now!

[PRCARGUY]

I'm in for a set. :banana:

[blackhueys]

Just sent my money. Gotta get back from iraq now to put them on lol.

[J.bo]

put me down one set.

[XLRVIII]

Simple fix... remove the string attached to the pull handle.

Replace the nylon string with some 100+ LB steel wire fishing leader.
Then on the end of the leader {you see where this is going huh?}
attach a very large TREBLE HOOK!!!

Then you can DRAG the perp to the police station depending on how fast he can run.
FYI a fully grown man with a treble hook in his hand CAN RUN VERY FAST when pulled behind a MM or CV!

[O's Fan Rich]

Simple fix... remove the string attached to the pull handle.

Replace the nylon string with some 100+ LB steel wire fishing leader.
Then on the end of the leader {you see where this is going huh?}
attach a very large TREBLE HOOK!!!

Then you can DRAG the perp to the police station depending on how fast he can run.
FYI a fully grown man with a treble hook in his hand CAN RUN VERY FAST when pulled behind a MM or CV!

That is a great first post!

Do any fishing otherwise?

[Stranger in the Black Sedan]

Sorry I'm a latecomer, are these still available?

[JUST 1BULLITT]

Yeah, "what he said..." ANY chance of doing a 2nd "Batch order??" I was in the field longer than anticipated and I missed all the actual ordering!:bows:

[ledzilla]

Any word on when these are shipping out?

[Joe Walsh]

Yeah, "what he said..." ANY chance of doing a 2nd "Batch order??" I was in the field longer than anticipated and I missed all the actual ordering!:bows:

CRAP!
Me too!

I saw the original thread, then totally forgot about these....:alone:
I need two sets.......for the Marauder and my brother's CV.

[N40GL]

First update: I got the invoice from Troy Products yesterday in the mail. I'm expecting the actual products any time now.

Second update: I may have a few extras. If so, I'll drag 'em to MV-VII. If you ain't goin' there, PM me.

[N40GL]

Hi gang,

Still no plates (as of Saturday). If they arrive before I leave for MV7 (on Wednesday morning) I'll bring 'em with me. Otherwise, I hope they are there when I get home.

At least I have all the envelopes addressed! And, I think I'll have a few extra.

[Bluerauder]

The video was removed from the linked site due to concerns that it might be viewed by an "unintentional market".

[N40GL]

Ummm ... doctors?

Somehow, I think the crooks already know all about this.

[N40GL]

THE GOOD NEWS:

I just got home from work and the package was sitting on my doorstep. They are all divided up into their envelopes and I'm bringing them all to MV7. What isnb't picked up there will get mailed October 5.

THE BAD NEWS:

No extra sets - sorry! All 33 were claimed.

If someone brings (1) a cordless drill, (2) a screwdriver, and (3) a sharpened pencil, you can instell 'em in about 15 minutes.

[FastMerc]

THE GOOD NEWS:

I just got home from work and the package was sitting on my doorstep. They are all divided up into their envelopes and I'm bringing them all to MV7. What isnb't picked up there will get mailed October 5.

THE BAD NEWS:

No extra sets - sorry! All 33 were claimed.

If someone brings (1) a cordless drill, (2) a screwdriver, and (3) a sharpened pencil, you can instell 'em in about 15 minutes.COOL man see you there!

[FordNut]

Hi gang,

Still no plates (as of Saturday). If they arrive before I leave for MV7 (on Wednesday morning) I'll bring 'em with me. Otherwise, I hope they are there when I get home.

At least I have all the envelopes addressed! And, I think I'll have a few extra.

I won't be making the MV7 run, so mail 'em out when you can.

[PRCARGUY]

I won't be making the MV7 run, so mail 'em out when you can.
Me Too! :bows:

[TAKEDOWN]

Yesss, looking forward to it in the mail!

[N40GL]

Everything went in the USPS Monday afternoon.

[Stranger in the Black Sedan]

I ordered and paid for mine ON the deadline, hopefully I was one of the 33

[fastblackmerc]

Wow that was cool...yet uncool at the same time.

I bet a plate can be bolted or welded in by the DIY'er as well.

If you weld in the plates how will you change the backup bulbs?

[Vortech347]

They can go ahead and break in. If I do carry my weapons in the car if I can't park where I can see it, I don't leave the car. That simple. If its something THAT important then get it to the destination with no stops. Also this is why I have insurance. **** happens.

I can understand this being an issue with LEO cars though.

[GordonB]

The TROY items sound good. Just wondering about it being easier to just pick the trunk lock. I'll bet a real thin, long screw driver will enable you to gain quick access without having to BUST the backup light out. May try it tonight.

BTW, the weight of my trunk lid is about maxxed out what with a spoiler, and inside decklid panel with the godshead emblem on it and the torsion bars adjusted as far as they go.

GordonB

[hwy73]

Plates arrived today ! Might get them installed before the Phils win game-2 tomorrow ;)

Good job N40GL.

[GordonB]

Correction, I was UNable to pick the trunk lock using a real thin, long screw driver.

I agree that these plates are a good idea.

GordonB

[N40GL]

Check the new thread if you want in on the second group buy.

[SMOKE]

Mine showed up yesterday! Thanks again! Good luck w/ the second group buy!

Best,
Jonathan

[Vortech347]

Holy hell, everyone is buying one of these......

Start tomorrow I will be selling anti-window smashing shields. Its a metal frame that goes over the window preventing people from breaking the window and entering the vehicle. 19.95. I'd have Billy Mays endorse it but he's no longer with us.

[TAKEDOWN]

Received mine today!!! Thanks!

[ledzilla]

Mine came in last week. If I can find a warm garage to work in when I have the time I'll get them installed.

[babbage]

Is it too late to change the design? I was thinking about the monkey and the coconut story where by you can catch a monkey by placing a small object inside a coconut. Once the monkey puts his hand into the hole, grabs the object and makes a fist he can't get his hand back out as the monkey is too dumb to let go of the object. The coconut is anchored by a rope to a tree or something.

CrownVic/Marauder design would have six metal triangles with a one way hinge arranged in such a way that once the reverse light was smashed and the hand went in you'd be unable to pull your hand back out unless you cut it off at the wrist.

Bonus: the "suspect" will still be there when you come back to your car, probably find that the car alarm isn't necessary.

This is the style I'd prefer to buy. Who's gonna fab some?

[FordNut]

Is it too late to change the design? I was thinking about the monkey and the coconut story where by you can catch a monkey by placing a small object inside a coconut. Once the monkey puts his hand into the hole, grabs the object and makes a fist he can't get his hand back out as the monkey is too dumb to let go of the object. The coconut is anchored by a rope to a tree or something.

CrownVic/Marauder design would have six metal triangles with a one way hinge arranged in such a way that once the reverse light was smashed and the hand went in you'd be unable to pull your hand back out unless you cut it off at the wrist.

Bonus: the "suspect" will still be there when you come back to your car, probably find that the car alarm isn't necessary.

This is the style I'd prefer to buy. Who's gonna fab some?

Just hang a bear trap inside the trunk lid.

[babbage]

Just hang a bear trap inside the trunk lid.

Sure my idea is a bit harsh but very effective. The bear trap would get in the way of groceries and things. My design would sit flush, out of the way and totally unnoticed.

[ledzilla]

Hey, what's the best type and size drill bit to make the holes? I want to do this right the first time and I haven't drilled holes into anything other than wood or plastic.

[JohnE]

You could simply remove the emergency release cable. I like to unplug the connector at the solenoid for extra protection when in questionable areas. It would be very easy to get to the trunk release button in the door.

[fastblackmerc]

Hey, what's the best type and size drill bit to make the holes? I want to do this right the first time and I haven't drilled holes into anything other than wood or plastic.

I used a step drill. Just need to g a little bigger than the screw diameter.

[DOOM]

I won mine at MV7
Thank you MM.net & Mark :up:

[CBT]

I won mine at MV7
Thank you MM.net & Mark :up:

How much did it cost ya to have them chromed

[DOOM]

Working on it now :coolman: