View Full Version : wilwoods!
blackhueys
09-14-2009, 06:21 AM
Just wanted to drop A line and say that I love them. Had a couple of small issues but todd helped out above and beyond, thanks. Car stops on a dime. If your going to get them go all out and get the full kit front and rear. Before you bleed them make sure that all the screw in plugs on the calipers are tight I didnt and had a small leak till I did. I let my dad drive it the other day and the first stop he said god damn! Thanks again. If anyone needs help let me know as I was a little lost at first till I actually dug in and did it.:burnout:
This will be done in the winter.
ImpalaSlayer
09-14-2009, 08:54 AM
This will be done in the winter.
let me know if you need a hand doomie. we can do it up here if you want
fastblackmerc
09-14-2009, 09:37 AM
Just wanted to drop A line and say that I love them. Had a couple of small issues but todd helped out above and beyond, thanks. Car stops on a dime. If your going to get them go all out and get the full kit front and rear. Before you bleed them make sure that all the screw in plugs on the calipers are tight I didnt and had a small leak till I did. I let my dad drive it the other day and the first stop he said god damn! Thanks again. If anyone needs help let me know as I was a little lost at first till I actually dug in and did it.:burnout:
I did the fronts on my MM. One of the best mods you can do. :up:
Spectragod
09-14-2009, 06:33 PM
I did the front and rear FTMFW!
Kennyrauder
09-14-2009, 08:26 PM
What is the best & most reliable brake kit? I hear so much about Bembro...
ledzilla
09-14-2009, 08:34 PM
I'd love to put on the big brake kit. Those Wilwoods look sweet. The stocks just seem so puny by comparison. I need to go knock over a few liquor stores, so I'll be back in a while...
What is the best & most reliable brake kit? I hear so much about Bembro...
I don't think brembo makes a kit for our cars.
kariamack
09-15-2009, 12:57 AM
lets see some pics
Spectragod
09-15-2009, 05:25 AM
OK, a couple before I wrapped everthing up......
http://www.mercurymarauder.net/forums/picture.php?albumid=59&pictureid=507
http://www.mercurymarauder.net/forums/picture.php?albumid=59&pictureid=504
ddogg626
09-15-2009, 05:38 AM
Where can I get the kit ??
fastblackmerc
09-15-2009, 05:40 AM
Where can I get the kit ??
Look in the forums for TCE. Todd is a great guy to work with.
fastblackmerc
09-15-2009, 05:44 AM
Mine in red.
http://i167.photobucket.com/albums/u133/fastblackmerc/MM%20Mods/TCE%20Brake%20Upgrade/TCESetup3.jpg
http://i167.photobucket.com/albums/u133/fastblackmerc/MM%20Mods/TCE%20Brake%20Upgrade/Complete2.jpg
http://i167.photobucket.com/albums/u133/fastblackmerc/MM%20Mods/TCE%20Brake%20Upgrade/New2.jpg
ImpalaSlayer
09-15-2009, 05:46 AM
are the willwood and baer rotors interchangeable? they look almost the same
fastblackmerc
09-15-2009, 05:48 AM
are the willwood and baer rotors interchangeable? they look almost the same
I have no idea.
Todd TCE
09-15-2009, 06:30 AM
Maybe....but I doubt it. For the most part the dimensions may be close but I think you'd have some issues of sorts some way or another.
dohc324ci
09-15-2009, 12:39 PM
What does the front and rears run?
blackhueys
09-15-2009, 02:17 PM
I wish I woulda had time to take some pics before I came back to iraq. the ones I have todd had redone in silver and they match my paint perfectly. only silvers I have seen so far.
fastblackmerc
09-15-2009, 02:42 PM
What does the front and rears run?
Check it out.
http://www.tceperformanceproducts.com/
TAKEDOWN
09-22-2009, 09:37 PM
This will be done in the winter.
Let me guess, DooM... done in chrome!
mpearce
09-26-2009, 02:38 PM
So for front and rear Willwood's you're lookin at over $3,000?
Is that right?
-Mat
jdando
09-26-2009, 03:12 PM
So for front and rear Willwood's you're lookin at over $3,000?
Is that right?
-Mat
Yep, that is correct.
fastblackmerc
09-26-2009, 03:13 PM
So for front and rear Willwood's you're lookin at over $3,000?
Is that right?
-Mat
Yes.
I got just the front kit.
I'm getting a set of rear calipers powder coated the same red and have aftermarket rotors that are slotted just like the fronts. A set of stainless steel braided hoses, ceramic pads, and all new parking brake hardware will complete the setup.
mpearce
09-26-2009, 03:50 PM
Wow...thats gettin' close to supercharger territory there. For brakes!
Thanks for the info. Fronts only sound fine to me.
-Mat
Todd TCE
09-26-2009, 05:07 PM
As such kits go on many cars 3k for four wheels is quite reasonable actually... not that it's cheap I know.
mpearce
09-26-2009, 05:48 PM
As such kits go on many cars 3k for four wheels is quite reasonable actually... not that it's cheap I know.
Thanks for the reply Todd. I wasn't flaming or anything, it was just a surprise, thats all. I have not looked into the mod until now, so I was unfamiliar with the pricing.
They sure are pretty though!
-Mat
BODYMAN
09-26-2009, 09:07 PM
Matt, you would be amazed the diff w/ a big brake kit. Mine have saved my ^&* more than once
Spectragod
09-27-2009, 05:34 AM
I'll give all 4 wheels a big thumbs up. Pricey... yep, stops on a dime with 8 cents change, sooner or later, with all that change, you'll get most of that 3K back....
Todd TCE
10-27-2009, 06:49 PM
Thanks for the reply Todd. I wasn't flaming or anything, it was just a surprise, thats all. I have not looked into the mod until now, so I was unfamiliar with the pricing.
They sure are pretty though!
-Mat
Didn't take it that way at all. Just making the point that such kits are not inexpensive and these are well within the norm. No more/no less.:beer:
burt ragio
10-31-2009, 05:48 AM
Maybe it's the picture but in post #13 it looks like the stud holes on the rotor hat are the wrong size like to large.
Todd TCE
10-31-2009, 05:52 AM
Supplied 1/16" wheel spacer.
Centers on the hub and will work on a number of kits.
Tom Doan
11-08-2009, 07:35 PM
I love the rear kit. Big difference.
Todd TCE
11-08-2009, 07:40 PM
Nice thing about the rear is that you can alter pad choices pretty easily and move more rear brake into the car. From BP10 to 20s to semi-metallics like D, E, and others for track day use.
Just got off the phone with Todd.
He's putting together a kit for me. :D
Spectragod
12-28-2009, 01:34 PM
Just got off the phone with Todd.
He's putting together a kit for me. :D
He has them in chrome now???????????????? :confused:
Todd TCE
12-28-2009, 02:18 PM
No, he does not.
Spectragod
12-28-2009, 07:15 PM
No, he does not.
I'm surprised DOOM is even considering them then. :rolleyes:
I need to be able to stop this thing! :drive:
Drewstang
12-28-2009, 10:19 PM
Talk me into this Jake.
He has them in chrome now???????????????? :confused:
Anything can be chromed my friend. :D :coolman:
Spectragod
12-29-2009, 09:53 AM
Chrome won't get you home........... but it will get you laid. :D :lol:
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.