2007 Shelby convertible Car Max.

[guspech750]

http://www.carmax.com/enUS/view-car/default.html?AVi=2&id=6016355&N=4294966965+4294966656&D=90&ASTc=conviertible&zip=60542&No=0&Ep=homepage:homepage%20Make&Rp=R&PP=20&sV=List&CD=14+240+190+9&Q=0ea86c19-e2b7-4aac-a3b9-d6b109c0b5a5


Now I just have to convince my wife:rolleyes:

[TAKEDOWN]

I usually find my balls in her purse!

[UncleLar]

If I was buying it the first thing I'd do would be to tell them to take that frigging CarMax decal off of it! Then I'd go out and seat the rings correctly in an hour or so.

[Mac-MerC]

If I was buying it the first thing I'd do would be to tell them to take that frigging CarMax decal off of it!.

made sure i told them to do that when i bought my Marauder
and that is one nice lookin Mustang

[ChiTownMaraud3r]

Love Shelby's but the rear end of the car is so plain jane for 40 grand.. Literally looks like a six cylinder convertible.

[bob6364]

I was inches from buying one of those when the economy first fell on its face and my business was still crazy busy....now i'm glad I don't have that car payment....

[justbob]

277 miles, somebody lost their rear on that one BIG time! This car was $80 -$86 grand around here when new!

[Bradley G]

That may have been from a Ford dealer, who went out of business in Crystal Lake Il.
Otherwise just a co-inkie-dink

[ginson3]

I'll sell you an '08 with a Stage III Kenne Bell for less. It's making 648RWHP/600RWTQ.

[ginson3]

’08 GT500 Vapor/Black 18.5K miles all adult driven. The car has been down the track (5 passes, but not raced.

Kenne Bell 2.8 Stage 3 (648RWHP/599RWTQ)
SLP Exhaust W/ Ford Racing (Borla) Mufflers
1 Piece 4” Dia. Driveshaft
Full Ford racing Suspension
BMR Drive Shaft Loop
BMR Lower Control Arms
BMR Adjustable Pan Hard Bars
BMR Adjustable Upper Control Arm
Afco Heat Exchanger
Pro 5.0 Shifter
Canton Power Steering Reservoir
Canton Overflow Reservoir
Ford Racing Cam Covers
Polished Stainless Radiator Shroud Cover
Roush Vent Gauge Pods w/ Autometer “Cobalt” Fuel Pressure and Boost
“Red Stripe Option” Floor Mats
Ford Racing Lighted Door Sill Plates (Converted to Blue)
Painted Rocker Moldings
Body Color Painted Lighted (front side) Mirrors wired with running lights
HID converted Fog lamps
Carroll Shelby 20” wheels w/ Nitto 555”s (Rear 275/35-Front 255/35)
Carroll Shelby Signed & Framed Window Sticker
Carroll Shelby Signed Dash Plaque
Lojack Security
Trunk Lined with Hushmat
Spec Clutch
Sequential Tail Lamps
Ford ESP Premium Care 72mo/60k mi Warranty
All Original Take offs including tires & wheels
Bullet Proof Engine Build (see explanation)
Oliver Rods
Diamond Full Coating 19cc Pistons
ARP Studs
FelPro Gaskets
H13 Pins
All The best

Explanation: The day after the Kenne Bell was installed @ 6K miles I melted # 8 piston.
It was obviously a lean issue (I have the piston). The top end and crank were unhurt, therefore not replace. The block had piston smeared on #8 so I replaced it, however it could have probably gone .020” over and been fine and I have it crated for those who feel it would be important to have the #’s matching block. No hidden issues, and can provide invoice, photos of the damage and the builder will stand behind the build

[johnnyrauder]

sweet ride i'll trade you my 03 mm with all the trimmings 450 rwhp + $5000k

[ginson3]

I would love to have another MM, but I need to sell. I have over 85K in the Shelby, I'll take 37K for it.

[guspech750]

I'll sell you an '08 with a Stage III Kenne Bell for less. It's making 648RWHP/600RWTQ.
Boy! Thats sweet. I love the color!

[ginson3]

a few more pictures

[ginson3]

I really need to let this GT500 go to a new home, would appreciate if all would pass on the word

JR

[RR|Suki]

Love Shelby's but the rear end of the car is so plain jane for 40 grand.. Literally looks like a six cylinder convertible.

yeah the big air splitter doesn't give anything away... or the stainless dual exhaust

[guspech750]

^^^^^^^^^^^^^^^^^^

:rofl: