Ford Racing Technologies 5.0L Cammer Crate Engine

[Constable]

I had read about the FRT 5.0L Cammer crate motor two years ago. It was supposed to be on the market sometime this year. I tried and tried, but can't find them for sale yet. The motor is a bored & stroked 4.6 DOHC. It's got all sorts of goodies in it:

- Larger cylinders (94mm vs. 90.2mm) for 5.0 liters
- Flanged cylinder liners
- Reinforced crankcase web areas
- Forged pistons
- 11.0:1 compression ratio
- Ported heads
- Higher-lift cams (12mm vs. 10mm)
- Beehive-shaped valve springs to accommodate the higher lift
- Modified roller-finger followers
- Multi-layer steel-insert head gaskets
- Higher-flow fuel injectors
- 3-piece cast-magnesium variable geometry intake manifold
- Higher-flow, dual-cone-spray fuel injectors

I think it was intended for sale as a hot-rodders dream... meant to be used in custom applications like vintage Mustangs, F100's, and Ford street rods. I'd like to get my hands on a long block and bolt it into my MM. It'll take care of that "ticking" and give me about 430 N/A hp, as well.

Let me know if any of you have information on this crate motor.

[amerikan]

No information but that 430 NA horsepower sounds really good.

[MAD-3R]

Or, you can call VT, have them stroke your current block, and walk away with 450 hp (380 RWHP.)

If I did the math right..

80 * 380
100 x


80x = 38000

80x/80 = 38000/80

x = 450

[Ross]

If I had been a better boy this year, I would ask Santa Claus for one of those stroked engines. However...:alone:

[darebren]

now i'm worried about block cracking, especially a bored out one. Man, wish that cracked block thread never came out, giving me chills down my back as i teeter on deciding on major future mods.

[MAD-3R]

Moderation is for Monks!!! Take big bites!!

[SouLRioT]

You might want to see the info DR gets with his crate Cobra engine. Depending on what info you get from him you might like that way better.

[Silver_04]

I'm looking into at least getting the magnesium intake for my car-heard that has good performance gains by itself-of course that is if it fits a Marauder. I've started a thread (it's kind of gone astray) about the intake in the Garage.

[Logan]

The FR500 motor, from what I heard, is a limited, 200 engine run and word had it about a year ago that the first run was completely spoken for.