Adding Some Boost

[DTUB]

Finally saved enough cash to buy an eaton :burnout: I still need a few parts though... BAP, MAF, FUEL INJECTORS, IAT, RIBBED IDLER PULLEY, INTERCOOLER PUMP, BYPASS CANISTER that sits on the side of the blower.

[ImpalaSlayer]

damn bro, that looks really nice.

[ntd]

you engine compartment look amazing with your attention to detail can't wait to see how your Eaton will look. I have a stock intercooler pump that I'm not going to use going to a trunk mount tank and larger pump pm me if interested.

[offroadkarter]

holy **** thats a clean engine bay! I love what you did with the intake, and the eaton will be even better!

[ImpalaSlayer]

2 questions.

1. what fuel rails are they

2. what are the 2 extra lines coming from the cross over tube

[DTUB]

2 questions.

1. what fuel rails are they

2. what are the 2 extra lines coming from the cross over tube
Aeromotive with remote FPRS. -10 to the heater and -8 to the head cooling mod. They both run under the intake.

[ImpalaSlayer]

Aeromotive with remote FPRS. -10 to the heater and -8 to the head cooling mod. They both run under the intake.

nice, im gona have to get those. you must be mad that your gona have to cut up that pretty cross over tube lol. is everything powdercoated or is it painted?

[DTUB]

nice, im gona have to get those. you must be mad that your gona have to cut up that pretty cross over tube lol. is everything powdercoated or is it painted?
The front cover and tube were the only parts that turned out decent every thing else outgassed and bubbled to much so those are auto paint and clearcoat. I found out the hard way that are castings are to porous.

[justbob]

Damn son! thats one nice clean engine! How is it we haven't met yet?

[DTUB]

Damn son! thats one nice clean engine! How is it we haven't met yet?
We did Bob, late October 2008 Byron Dragway.

[ImpalaSlayer]

We did Bob, late October 2008 Byron Dragway.

LOL, Bob is old :lol:

[Glockafella]

That is one of the nicest N/A motors i have seen on here. well N/A for a litle longer anyways!

You might out bling DOOM!

[DOOM]

Another soon to be superchaged brother. :up:

[FordNut]

Lots of work went into that custom upper to remove the EGR and PCV fittings. Nice and clean looking.

[DTUB]

Lots of work went into that custom upper to remove the EGR and PCV fittings. Nice and clean looking.
EGR EVAP and PCV are still functional.

[ImpalaSlayer]

oh wow i didnt even notice that. and its a naz intake. very cool man!

[DTUB]

oh wow i didnt even notice that. and its a naz intake. very cool man!
Not a NAZ. I had a lot of free time on my hands last winter either being laid off or barely working so I took a long look at the pictures Carlos posted and made my own. I't has custom air horns 1/8 bottom full porting and only cost $150.00 for everything

[ImpalaSlayer]

Not a NAZ. I had a lot of free time on my hands last winter either being laid off or barely working so I took a long look at the pictures Carlos posted and made my own. I't has custom air horns 1/8 bottom full porting and only cost $150.00 for everything

dude nice! why dont you post this stuff up!?

[DTUB]

dude nice! why dont you post this stuff up!?
When I get some time.

[ImpalaSlayer]

When I get some time.

very cool stuff you have there man! we would all love to see! :beer:

[DTUB]

very cool stuff you have there man! we would all love to see! :beer:
Thanks- I'll keep posting pics as I go.

[justbob]

We did Bob, late October 2008 Byron Dragway.
I feel like an idiot now...:) I still swear i've never seen that engine before! You gonna make it out to any other meets / lunchs?:beer:

[DTUB]

I feel like an idiot now...:) I still swear i've never seen that engine before! You gonna make it out to any other meets / lunchs?:beer:
Yea it was pretty much stock that day. It's been up on jack stands for about a year now while I made all these changes and It looks like I've got a lot of work a head of me yet so I'll keep on posting my progress.

[dohc324ci]

Man that looks awesome...time to start looking at bling...jealous.

[RacerX]

Very very nice! She's a beaut!!! Wait! Is that a fingerprint I see on... Oh, nope! Nevermind! :D

[Glockafella]

You should sell me that intake manifold and spacer...being that your laid off and you wont need them anymore.

[DTUB]

You should sell me that intake manifold and spacer...being that your laid off and you wont need them anymore.
PM me an offer...if your serious.

[cougar9150]

Wow just wow. Wow, that is nice. Where did you get the cooling lines and what did it take to make them fit. Did I say wow?

[03blackmerc]

damn son and i thought under my hood was clean i was wwwwaaaaaaaayyyy wrong

[burt ragio]

Very creative a real piece of art work. Were you happy with the performance results on your custom intake ? Looking foward to more pics when you start the conversion.

[DTUB]

Wow just wow. Wow, that is nice. Where did you get the cooling lines and what did it take to make them fit. Did I say wow?I used the stock crossover with -8 -10 fittings welded on for heater and head cooling running under the manifold. Wasn't all that hard to do. (And surprisingly no leaks)

[DTUB]

Very creative a real piece of art work. Were you happy with the performance results on your custom intake ? Looking foward to more pics when you start the conversion.Didn't get a chance to test it out (to many issues with the rest of the car) and then I came into some cash and decided to go with a Cobra swap.

[cougar9150]

I used the stock crossover with -8 -10 fittings welded on for heater and head cooling running under the manifold. Wasn't all that hard to do. (And surprisingly no leaks)

Sweet and did you just modify your stock coolant lines w/the fittings and such? I probably won't add the heater and head cooling lines to mine but love the way the coolant lines look.

I am planning an Eaton swap of my own down the road (get the brackets for my birthday this month :D) and would like to add that pretty coolant line setup when I modify the cross over tube for the Eaton.

[DTUB]

Sweet and did you just modify your stock coolant lines w/the fittings and such? I probably won't add the heater and head cooling lines to mine but love the way the coolant lines look.

I am planning an Eaton swap of my own down the road (get the brackets for my birthday this month :D) and would like to add that pretty coolant line setup when I modify the cross over tube for the Eaton.
I'll be changing my crossover because of the Eaton swap. I think I'll be running the cooling mod straight to the heater core and eliminate all the extra lines. Pics coming soon.

[Big Black Beast]

I'm just gonna keep my hood shut from now on...