Does Liquid (member on MCM) post on here?

[Zack]

He just did a Mach1/Cobra brake conversion as seen here:
http://www.motorcitymarauders.com/forums/showthread.php?t=11077

Hats off to him but I want to question the way he did his install and Id like to ask him about it before other members follow suit to his method.

I am in NO WAY FLAMING his work, I want to make sure its A-Ok before others do it his way.

See post 4 for concern.

[justbob]

Show last check in on 3/19 but hasn't posted since August.

[musclemerc]

Well Zack, looks like your idea inspired him, i'm sure there will be more brake swaps in the future.

[Zack]

This is what I want to ask him:

You see how my caliper is located as compared to the rotor:

http://i307.photobucket.com/albums/nn306/Marauder-Z/Stang%20Brake%20Conversion/BrakeConversion010.jpg


And His:

http://i307.photobucket.com/albums/nn306/Marauder-Z/Stang%20Brake%20Conversion/BrakeConversion.jpg


I looked this over for a while and noticed the rotor he uses may be throwing my perception off. Im just curious if his pad makes full contact with the rotor or hangs off a little at the top.

If he has full pad contact, hats off to you Brutha for simplifying this mod! :beer:

I hope he chimes in and posts his pics here.
Ive been driving my MM around the past few days with the Mach brakes and LOVE them.

[Zack]

The way my calipers are mounted the pad is at the very edge of the rotor. It just looks like his may hang off a bit by the pics, but I hope I am wrong.
Great work Liquid!

[musclemerc]

You're right, looks like he's not gonna get full contact to the rotor.

[Zack]

You're right, looks like he's not gonna get full contact to the rotor.

Thats why I hope he chimes in, and thats why I THOUGHT I needed to mod the bracket like I did.

I really hope I was wrong, cause this is the cats meow if he has full contact.

[justbob]

I'll PM him next door if you want.

[liquid]

Hi there

The pad does make full contact, check the bedded-in photo and you can see the contact area is inside the rotor OD.
http://moldyrabbit.com/liquid/mm/brakes/IMG_2157.JPG

[Zack]

Badass, thanks liquid and nice work!

[ntd]

Zack you had a great idea:bows: and Liquid thanks for the great spin off of Zack's Idea:bows:. Adding this Mod list, what you guys got going for the rears?

[blazen71]

I was thinking if there was enough material you could drill a larger hole and make bushings with an offset hole and either press in or weld in.

[Zack]

Zack you had a great idea:bows: and Liquid thanks for the great spin off of Zack's Idea:bows:. Adding this Mod list, what you guys got going for the rears?


Im gonna attemp to install Mach fronts on the rear of the MM, gotta lose the E-Brake to do it though.


I was thinking if there was enough material you could drill a larger hole and make bushings with an offset hole and either press in or weld in.

Excellent idea! Sadly im not capable of making such an item :bigcry:

[LANDY]

this will be on my to do list once i get other thing sorted out like upgraded axels.
thanks guys for making this work.