5.0L vs 4.6 DOHC dimensions

[Taemian]

Didn't someone put a photo up that showed a 5L and a 4.6 DOHC side by side? I'd like to get that photo again, as I'm doing some engine swap studying.

Thanks!

[Big Black Beast]

In general, the DOHC 4.6 is wider on top and down low than the old 5.0 (302).
The new 5.0, who knows?

[Jeremy]

According to Wikipedia:

http://en.wikipedia.org/wiki/Ford_modular_engine#5.0.C2.A0L _Coyote

The new motor shares the same deck height & stroke, so I'm going to assume the outside dimensions are probably going to be very similar to the 4.6, just like the "big bore" block from FRPP..

The internals? Way different..

Edit: Oh, and here are some dimensions of different modular motors for you, look about half way down..

http://www.sullivanperformance.com/yvs450/tech/tech1.htm

[RacerX]

5.0l aluminum big bore used in the cammer engine is the same size externally, I believe. I know the deck height is the same as the 4.6.

[Joe Walsh]

I've read that the new 5.0 Coyote engine has better flowing heads that are not as wide as the previous DOHC heads.
Should mean the new 5.0 is a little narrower width wise.