Moog end links

[burt ragio]

Over the years I have upgraded my suspension. I have changed rear upper/ lower control arms from stamped to zac/mac. Then the Naake QA1s s/adjust f/r. Then back to oem 3/4 coil cut. Ugraded sway bars to larger solid addcos'. Then just a few days ago after changing out front wheel bearing hub assembley (maintenace project) I also replaced the front sway bar end links with Moog what a difference. This simple change made such a change & nothing was wrong with the oem. The oem are nylon joints the Moog are steel joints. My slead no longer drifts. If I only new sooner. Mercury Marauder 2004, Moog Suspension Parts. (http://www.moog-suspension-parts.com/products.asp?cat=10424)

[Blackened300a]

I also upgraded to the moog links last weekend and the front end is much stiffer. My fronts were motorcraft and lasted less then 20k miles with the addco sway bars.
However the new links didnt take away that "click" sound when stopping and letting off the gas. I think the K member is what the click is. I had a similar sound with my Impala that has a aluminum engine cradle.

[burt ragio]

Click sound ? Might that sound be happening while applying brakes ? It could be your pads moving in the calipers.