PDA

View Full Version : How much power do you think I'll make?


Blackened300a
10-19-2010, 06:42 PM
Thursday October 28th is my Dyno tune. Last time on the dyno I put down 293RWHP and 309RWTQ.
Latest mods since my last dyno tune are....
New pistons and bearings
Spaz short runner intake
EMP waterpump
Rear cat-delete.

Closest guess gets a discount on the next clothing item I put out. Exact guess gets you a free item on the next run.
ImpalaSlayer
10-19-2010, 06:45 PM
298/314 flat out guess
kmastl
10-19-2010, 06:57 PM
302 HP and 318 Tq would be an awesome number to have.
CBT
10-19-2010, 07:01 PM
Hmmm....304/316.
Blackened300a
10-19-2010, 07:01 PM
298/314 flat out guess

Only a gain of 5 rwhp and 5 rwtq??
F8LBITEva
10-19-2010, 07:03 PM
I say 305/320
Mr. Man
10-19-2010, 07:13 PM
319hp/331tq
FordNut
10-19-2010, 07:18 PM
300/280...
ctrlraven
10-19-2010, 08:11 PM
304/312

I'm going this Saturday for my dyno, if my AFR is way off I'll def be getting a dyno tune asap.
J-MAN
10-19-2010, 08:16 PM
372/389...
Joe Walsh
10-19-2010, 08:21 PM
302HP/305TQ

That 'Spaz' intake will give you more top end HP, but you are going to lose some torque.
TAKEDOWN
10-19-2010, 08:22 PM
325hp/333hp
MOTOWN
10-19-2010, 09:56 PM
ill say 300/317 ftw!
LANDY
10-20-2010, 04:26 AM
308/298 because of the spaz
Pops
10-20-2010, 05:37 AM
311 hp and 325 torque
Shermanator
10-20-2010, 05:48 AM
316 hp and 312 tq, pure guess just like everyone else, includng Pops.
Pops
10-20-2010, 05:50 AM
I used a guess from my old numbers! The car should be fast if it all comes together. Good luck Paul!
Mike
10-20-2010, 05:54 AM
309/316....
RacerX
10-20-2010, 05:57 AM
300/280...
I think you have closest imo. Is the engine broken in for a bit yet?
Blackened300a
10-20-2010, 06:01 AM
I think you have closest imo. Is the engine broken in for a bit yet?

Almost 4K miles on it since the rebuild. Its running stronger then before. I punched it to pass a truck last week and it broke traction on the downshift and got loose on the 2nd gear shift. It never did that before.

My personal guess is 308rwhp and 318rwtq but anything over 300rwhp will make my day.
Bluerauder
10-20-2010, 06:19 AM
Thursday October 28th is my Dyno tune. Last time on the dyno I put down 293RWHP and 309RWTQ.
Latest mods since my last dyno tune are....
New pistons and bearings
Spaz short runner intake
EMP waterpump
Rear cat-delete.

Closest guess gets a discount on the next clothing item I put out. Exact guess gets you a free item on the next run.

I am gonna lowball this at 293 RWHP and 309 RWTQ. Closest to the pin wins right. :D
babbage
10-20-2010, 06:37 AM
310hp/299tq - should be less tq with the psri - my guess
jflave
10-20-2010, 07:37 AM
304-311 WTF do i know:dunno:
2,4shofast
10-20-2010, 09:28 AM
306hp & 317tq
RacerX
10-20-2010, 10:10 AM
Hmmmm... What length are the runners on the PSRI? I think he was doing most @ 9.5".
Blackened300a
10-20-2010, 10:13 AM
Hmmmm... What length are the runners on the PSRI? I think he was doing most @ 9.5".

Not sure, I've had it for a while. When he was here he was raving about making 30 RWHP on a Mach1. We shall see what it does.
Krytin
10-20-2010, 11:55 AM
328 rwhp & 322 rwtq

What time & where is the dyno run - I'm off Thursday!
fastblackmerc
10-20-2010, 11:58 AM
302hp/312tq
ImpalaSlayer
10-20-2010, 12:55 PM
Paul, for reference I made 306/295 I think but granted it was leaking. That was with every bolt on available. I also think my car is weaker then most though so who knows. Good luck
Blackened300a
10-20-2010, 04:21 PM
328 rwhp & 322 rwtq

What time & where is the dyno run - I'm off Thursday!

JDM engineering at 8am.
ctrlraven
10-20-2010, 04:37 PM
JDM engineering at 8am.
Make sure you get video or it never happened! :lol:
guspech750
10-20-2010, 07:11 PM
324 RWHP and 331 RWTQ
Blackened300a
10-20-2010, 07:14 PM
Make sure you get video or it never happened! :lol:

Ill have video and Ill scan the dyno sheet as well. ;)
Kennyrauder
10-20-2010, 07:26 PM
I appreciate your efforts, don't be afraid ...come to the s/c side & feel the REAL force. Loving the real force for the last 5 years!!!! 425RWHP by Lidio.
RacerX
10-20-2010, 07:34 PM
My guess: 308RWHP 301RWTQ
My intake is 9.5" on the inside short radius. naz # 016 Yours is the same unless you requested different. I found on the stang sites that he sold them on (the few that were delivered!) that they were 9.5" unless you requessted or he advised differently.
Blackened300a
10-27-2010, 03:37 PM
Tomorrow at 8am I hit the rollers. Video and dyno sheet will follow.
bosscj72
10-27-2010, 04:40 PM
307 RWHP and 321 RWTQ is my guess. I would ask more questions like how many miles did your last Dyno Tune have on the engine and why do the pistons replacement? That is why I am guessing. If the motor was tired I would change the numbers to 323 HP and 327 TQ (but use my first numbers for this challenge!).

Dave
ImpalaSlayer
10-27-2010, 04:42 PM
307 RWHP and 321 RWTQ is my guess. I would ask more questions like how many miles did your last Dyno Tune have on the engine and why do the pistons replacement? That is why I am guessing. If the motor was tired I would change the numbers to 323 HP and 327 TQ (but use my first numbers for this challenge!).

Dave

is motor basically sploded. has new guts now
CBT
10-27-2010, 04:45 PM
Hope you surprise us all, show that dyno who's boss :beer:
musclemerc
10-27-2010, 06:53 PM
My guess is gonna be 304hp/296tq
LANDY
10-28-2010, 03:46 AM
Tomorrow at 8am I hit the rollers. Video and dyno sheet will follow.Good luck and have fun.
Bring us back some proud n/a #'s
Blackened300a
10-28-2010, 04:15 PM
Well the new numbers are in........ Charlie was the closest to the guess. 296 RWHP and 306 RWTQ.

The biggest difference is the power curve over my last tune. You can see how I lost torque right at 5500 RPMs.
Heres the 2006 dyno sheet.
http://i32.photobucket.com/albums/d12/blackened300a/b4a4be6a.jpg

Now here's today's dyno sheet. With the new mods, I make consistent power all the way up until red line. The result was a big improvement of mid-high power. Now it pulls stronger past 75mph.
http://i32.photobucket.com/albums/d12/blackened300a/c00d707f.jpg

Heres the video of my dyno run and my obnoxiously loud, old school sounding exhaust.
GWLDJ-WUQZI
DOOM
10-28-2010, 04:20 PM
Slap some long tubes on it! :D
Bluerauder
10-28-2010, 04:32 PM
Well the new numbers are in........ Charlie was the closest to the guess. 296 RWHP and 306 RWTQ.

So would this be a good time to ask about "Marauder" car coats ?? ;)
RacerX
10-28-2010, 06:04 PM
:up:Time for some boost and you know it!
Joe Walsh
10-28-2010, 07:09 PM
Darn!
I had the RWTQ nailed!...was a little optimistic on the RWHP....:o

Congrats Paul!

Nice to see and hear her back up and running strong.
Mr. Man
10-28-2010, 07:18 PM
Congrats Paul. What's with all the carbon that blows out about 2 secs before he shuts it down?
Blackened300a
10-28-2010, 07:28 PM
Congrats Paul. What's with all the carbon that blows out about 2 secs before he shuts it down?

Probably cleaning out the mufflers since he was running about 130mph on the dyno. My old tune would give me a puff when I got on it, since the motor work, I had zero smoke or soot on my tailpipes. Today I had some on the tips and its running strong so all is well.
ctrlraven
10-28-2010, 08:28 PM
That's still pretty respectable numbers. When you say old school you're not kidding, that sound reminds me of a old school Mercury sled.

Going in the morning to get my dyno tune. I'm pretty sure you'll have me beat on HP but I'll probably have more TQ.
Krytin
10-29-2010, 08:08 AM
Nice work Paul!!
The exhaust sounds perfect!!!!